VobBlanker and Rebuilder error

[narco220]

Ok i seem to be having a problem with buffer overflow in dvdrebuild after ive blanked out content with vobBlanker.

Do i have to change any of VobBlankers default settings before processing to ensure i wont run into problems when rencodein the dvd with dvdrebuilder and cce sp??

Its so anoying as it get to the rebuild stage after a few hours then crashes with the buffer overflow message.

Current software versions:
DVD Decrypter 3.5.4.0
VobBlanker 2.1.3.0
DVDRebuilder pro 1.26.2
CCE-SP2 1.00.0015

[jdobbs]

The error is in the source created by VOBBlanker, not DVD-RB -- and the only way you can find it is by doing the rebuld. Unfortunately there's not a lot I can to for an input file that has been hosed. If you run DVD-RB against the unedited source you'll find it works fine.

[blutach]

This is most likely a ripping problem. AFAIK, VobBlanker produces compliant DVD structures. I have never had an issue with DVDB after preprocessing with VobBlanker.

Regards

[narco220]

Heres a bit more info if you can make sence of it

[01:13:08] One Click encoding activated...
-----------------
[01:13:08] Phase I, PREPARATION started.
- DVD-RB v1.26.2
- AVISYNTH 2.5.7.0
- CCE 1.0.0.15 encoder selected.
- Source: GRABIT DOWNLOADS
- VTS_01: 3,639,979 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 332,132 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 57.9%
- Overall Bitrate : 2,994/2,395Kbs
- Space for Video : 4,050,744KB
- HIGH/LOW/TYPICAL Bitrates: 8,808/1,178/2,395 Kbs
[01:21:54] Phase I, PREPARATION completed in 8 minutes.
[01:21:54] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Creating M2V for VTS_01 segment 36
- Creating M2V for VTS_01 segment 37
- Creating M2V for VTS_01 segment 38
- Creating M2V for VTS_01 segment 39
- Creating M2V for VTS_01 segment 40
- Creating M2V for VTS_01 segment 41
- Creating M2V for VTS_01 segment 42
- Creating M2V for VTS_01 segment 43
- Creating M2V for VTS_01 segment 44
- Creating M2V for VTS_01 segment 45
- Creating M2V for VTS_01 segment 46
- Creating M2V for VTS_01 segment 47
- Creating M2V for VTS_01 segment 48
- Creating M2V for VTS_01 segment 49
- Creating M2V for VTS_01 segment 50
- Extracting STILLS for VTS_01 segment 51
- Extracting STILLS for VTS_01 segment 52
- Extracting STILLS for VTS_01 segment 53
- Extracting STILLS for VTS_01 segment 54
- Extracting STILLS for VTS_01 segment 55
- Extracting STILLS for VTS_01 segment 56
- Extracting STILLS for VTS_01 segment 57
- Extracting STILLS for VTS_01 segment 58
- Extracting STILLS for VTS_01 segment 59
- Extracting STILLS for VTS_01 segment 60
- Extracting STILLS for VTS_01 segment 61
- Extracting STILLS for VTS_01 segment 62
- Extracting STILLS for VTS_01 segment 63
[05:12:49] Phase II ENCODING completed in 231 minutes.
[05:12:50] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8
- Rebuilding seg 8 VOBID 1 CELLID 9
- Rebuilding seg 9 VOBID 1 CELLID 10
- Rebuilding seg 10 VOBID 1 CELLID 11
- Rebuilding seg 11 VOBID 1 CELLID 12
- Rebuilding seg 12 VOBID 1 CELLID 13
- Rebuilding seg 13 VOBID 1 CELLID 14
- Rebuilding seg 14 VOBID 1 CELLID 15
- Rebuilding seg 15 VOBID 1 CELLID 16
- Rebuilding seg 16 VOBID 1 CELLID 17
- Rebuilding seg 17 VOBID 1 CELLID 18
- Rebuilding seg 18 VOBID 1 CELLID 19
- Rebuilding seg 19 VOBID 1 CELLID 20
- Rebuilding seg 20 VOBID 1 CELLID 21
- Rebuilding seg 21 VOBID 1 CELLID 22
- Rebuilding seg 22 VOBID 1 CELLID 23
- Rebuilding seg 23 VOBID 1 CELLID 24
- Rebuilding seg 24 VOBID 1 CELLID 25
- Rebuilding seg 25 VOBID 1 CELLID 26
- Rebuilding seg 26 VOBID 1 CELLID 27
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 27 VOBID 2 CELLID 1
- Rebuilding seg 28 VOBID 2 CELLID 2
- Rebuilding seg 29 VOBID 2 CELLID 3
- Rebuilding seg 30 VOBID 2 CELLID 4
- Rebuilding seg 31 VOBID 2 CELLID 5
- Rebuilding seg 32 VOBID 2 CELLID 6
- Rebuilding seg 33 VOBID 2 CELLID 7
- Rebuilding seg 34 VOBID 2 CELLID 8
- Rebuilding seg 35 VOBID 2 CELLID 9
- Rebuilding seg 36 VOBID 2 CELLID 10
- Rebuilding seg 37 VOBID 2 CELLID 11
- Rebuilding seg 38 VOBID 2 CELLID 12

[jdobbs]

I know exactly what is causing the error -- and as I said, it is the source. The "Buffer Overflow" errors (there are two of them) are both there specifically to tell you that there is a problem in the source.

What did you use to rip it?

[steptoe]

I've use VOBBlanker all the time to remove unwanted bits from DVDs and also used it to do basic cutting from the start of episode DVDs with no problems at all when run through DVD-RB after, plus its also fixed some weird DVDs that are unreadable with my other editing software or DVDShrink

If you have not got it, try updating to the latest release or the latest beta as these frequently fix errors or additions that were not in previous releases


I use the latest beta release, again when run through DVD-RB, I get no problems at all

[narco220]

I know exactly what is causing the error -- and as I said, it is the source. The "Buffer Overflow" errors (there are two of them) are both there specifically to tell you that there is a problem in the source.

What did you use to rip it?


Ive been using DVD Decrypter 3.5.4.0 to rip
you think i should switch to anydvd instead?

[jdobbs]

Definitely. Or, as a freeware alternative you may want to try DVDFab decrypter (http://www.dvdidle.com). There are lots of newer discs that can't be ripped with DVD Decrypter.

I personally use AnyDVD.

[narco220]

Ok just tried that ripped it with anydvd and now im getting a different error just at the end of the encoding process 99.1%
Run-time error '11': Division by Zero

I just don't get whats going wrong here?

[16:36:50] One Click encoding activated...
-----------------
[16:36:51] Phase I, PREPARATION started.
- DVD-RB v1.26.2
- AVISYNTH 2.5.7.0
- CCE 1.0.0.15 encoder selected.
- Source: GRABIT DOWNLOADS
- VTS_01: 3,533,544 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 305,207 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 59.2%
- Overall Bitrate : 3,239/2,591Kbs
- Space for Video : 4,026,454KB
- HIGH/LOW/TYPICAL Bitrates: 2,916/1,178/2,591 Kbs
[16:44:35] Phase I, PREPARATION completed in 8 minutes.
[16:44:35] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Creating M2V for VTS_01 segment 36
- Creating M2V for VTS_01 segment 37
- Creating M2V for VTS_01 segment 38
- Creating M2V for VTS_01 segment 39
- Creating M2V for VTS_01 segment 40
- Creating M2V for VTS_01 segment 41
- Creating M2V for VTS_01 segment 42
- Creating M2V for VTS_01 segment 43
- Creating M2V for VTS_01 segment 44
- Creating M2V for VTS_01 segment 45
- Creating M2V for VTS_01 segment 46
- Creating M2V for VTS_01 segment 47
- Creating M2V for VTS_01 segment 48
- Creating M2V for VTS_01 segment 49
- Creating M2V for VTS_01 segment 50
- Creating M2V for VTS_01 segment 51
- Creating M2V for VTS_01 segment 52
- Creating M2V for VTS_01 segment 53
- Creating M2V for VTS_01 segment 54
- Creating M2V for VTS_01 segment 55
- Extracting STILLS for VTS_01 segment 56

[jdobbs]

Maybe this?

- CCE 1.0.0.15 encoder selected.
- Source: GRABIT DOWNLOADS

[narco220]

I maybe a little slow here m8 but i can't see the problem there?

[Fishman0919]

I maybe a little slow here m8 but i can't see the problem there?

May have something to do with Forum Rule #6: LINK (http://forum.doom9.org/forum-rules.htm)

[gizzin]

Maybe thats where he extracted it too? ever thought of that?

[blutach]

@gizzin - it doesn't matter. On this board, if it smell and quacks like a duck, it doesn't have to walk like one to be one.

Do read this (http://forum.doom9.org/announcement.php?f=6), especially para 2.

On that basis, I believe the thread should be closed, but will leave the final decision to jdobbs.

Regards