PDA

View Full Version : RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY


Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 [59] 60 61 62 63 64

Atak_Snajpera
19th August 2016, 16:50
show me content of Blu-Ray_structure_info.txt and Blu-Ray_title1_info.txt

Grayfox
20th August 2016, 04:12
Blu-Ray_structure_info
eac3to v3.31
command line: "I:\RipBot264v1.19.3\Tools\eac3to\eac3to.exe" "E:\" -log="I:\Temp\RipBot264temp\job2\Blu-Ray_structure_info.txt"
------------------------------------------------------------------------------
1) 00001.mpls, 00001.m2ts+00002.m2ts, 2:23:11
- Chapters, 16 chapters
- h264/AVC, 1080p24 /1.001 (16:9)
- RAW/PCM, English, multi-channel, 48kHz
- AC3, English, multi-channel, 48kHz
- DTS, French, multi-channel, 48kHz
- AC3, French, multi-channel, 48kHz
- DTS, Spanish, multi-channel, 48kHz
- AC3, Spanish, multi-channel, 48kHz

2) 00020.mpls, 00021.m2ts, 0:51:49
- Chapters, 43 chapters
- h264/AVC, 1080i60 /1.001 (16:9)
- AC3, English, multi-channel, 48kHz
- AC3, French, stereo, 48kHz
- AC3, Spanish, stereo, 48kHz


Blu-Ray_title1_info

eac3to v3.31
command line: "I:\RipBot264v1.19.3\Tools\eac3to\eac3to.exe" "E:\" 1) -log="I:\Temp\RipBot264temp\job2\Blu-Ray_title1_info.txt"
------------------------------------------------------------------------------
The program type (4352) changes from video to audio. <ERROR>
The format of the source file could not be detected. <ERROR>

fatpizza
21st August 2016, 12:43
I'm getting the error "avs2avi.exe has stopped working" with VC-1 sources.

I've uninstalled and reinstalled ffdshow, AviSynth and Haali Media Splitter with a reboot in between and reinstalled Ripbot264.

ffdshow video decoder is set to wmv9 for VC-1.

I'm running Windows 10 Pro 64bit with Windows Media Player 12.

Can anyone help? Thanks.

I always have those issues with VC1 unless I set the decoder to intel quicksync in ffdshow. Solves all my problems.

wraith
21st August 2016, 13:04
Hi All. Noob to Ripbot, trying to take advantage of the Distributed Encoding feature.
So far I’ve been unable to get an encode to continue past the window with the text at the bottom declaring “Please Wait… Copying tools to shared folder…” Shortly after this window appears, it drops back to the main window. The last line in the log file says:
Error: The file 'D:\Temp\RipBot264temp\video.265' could not be opened for reading: open file error.
I’ve searched the forum and google and have come across a couple posts that raise the same issue with the video.264 file. Taking into account the RipBot264 Distributed Encoding Tutorial and the few posts I’ve found, I’ve:
• Setup RipBot264 to run as Administrator
• Set the necessary flags in RipBot264.ini
• Set Temp to D:\TEMP [only folder designation that seems to work]
• Shared the D:\TEMP\RIPBOT264TEMP directory and confirmed can be accessed from other Server computers on the same network
Despite the above, I still get the error.
Greatly appreciate any assistance on resolving this

FuzzyNutz
21st August 2016, 17:53
I always have those issues with VC1 unless I set the decoder to intel quicksync in ffdshow. Solves all my problems.

How? My VC-1 decoder choices for ffdshow are 'libavcodec' or 'wmv9'.

Atak_Snajpera
21st August 2016, 18:40
Hi All. Noob to Ripbot, trying to take advantage of the Distributed Encoding feature.
So far I’ve been unable to get an encode to continue past the window with the text at the bottom declaring “Please Wait… Copying tools to shared folder…” Shortly after this window appears, it drops back to the main window. The last line in the log file says:
Error: The file 'D:\Temp\RipBot264temp\video.265' could not be opened for reading: open file error.
I’ve searched the forum and google and have come across a couple posts that raise the same issue with the video.264 file. Taking into account the RipBot264 Distributed Encoding Tutorial and the few posts I’ve found, I’ve:
• Setup RipBot264 to run as Administrator
• Set the necessary flags in RipBot264.ini
• Set Temp to D:\TEMP [only folder designation that seems to work]
• Shared the D:\TEMP\RIPBOT264TEMP directory and confirmed can be accessed from other Server computers on the same network
Despite the above, I still get the error.
Greatly appreciate any assistance on resolving this

Record your desktop with fraps or similar software and upload on youtube or somewhere. This will help me to understand what is happening on your pc.

Atak_Snajpera
21st August 2016, 18:43
Blu-Ray_structure_info
eac3to v3.31
command line: "I:\RipBot264v1.19.3\Tools\eac3to\eac3to.exe" "E:\" -log="I:\Temp\RipBot264temp\job2\Blu-Ray_structure_info.txt"
------------------------------------------------------------------------------
1) 00001.mpls, 00001.m2ts+00002.m2ts, 2:23:11
- Chapters, 16 chapters
- h264/AVC, 1080p24 /1.001 (16:9)
- RAW/PCM, English, multi-channel, 48kHz
- AC3, English, multi-channel, 48kHz
- DTS, French, multi-channel, 48kHz
- AC3, French, multi-channel, 48kHz
- DTS, Spanish, multi-channel, 48kHz
- AC3, Spanish, multi-channel, 48kHz

2) 00020.mpls, 00021.m2ts, 0:51:49
- Chapters, 43 chapters
- h264/AVC, 1080i60 /1.001 (16:9)
- AC3, English, multi-channel, 48kHz
- AC3, French, stereo, 48kHz
- AC3, Spanish, stereo, 48kHz


Blu-Ray_title1_info

eac3to v3.31
command line: "I:\RipBot264v1.19.3\Tools\eac3to\eac3to.exe" "E:\" 1) -log="I:\Temp\RipBot264temp\job2\Blu-Ray_title1_info.txt"
------------------------------------------------------------------------------
The program type (4352) changes from video to audio. <ERROR>
The format of the source file could not be detected. <ERROR>


Are you sure that your movie has been correctly decrypted? Can you play that playlist 00001 in MPC-HC?
Can you also show me mediainfo reports of 00001.m2ts and 00002.m2ts ?

FuzzyNutz
21st August 2016, 23:19
I always have those issues with VC1 unless I set the decoder to intel quicksync in ffdshow. Solves all my problems.

I reinstalled ffdshow using a modified version that allowed me to pick Intel's QuickSync for VC-1 decoding and I enabled my CPU's integrated graphics via BIOS configuration. VC-1 encoding is now working. Thank you, fatpizza.

It seems each time I open Ripbot264, the ffdshow encoder for VC-1 changes back to 'wmv9'. I have to change it to QuickSync after opening Ripbot264 when dealing with VC-1.

fatpizza
22nd August 2016, 00:13
I reinstalled ffdshow using a modified version that allowed me to pick Intel's QuickSync for VC-1 decoding and I enabled my CPU's integrated graphics via BIOS configuration. VC-1 encoding is now working. Thank you, fatpizza.

It seems each time I open Ripbot264, the ffdshow encoder for VC-1 changes back to 'wmv9'. I have to change it to QuickSync after opening Ripbot264 when dealing with VC-1.

I have to do it every time I reboot which is annoying. But at least it works. :)

FuzzyNutz
22nd August 2016, 00:37
I have to do it every time I reboot which is annoying. But at least it works. :)

Thanks again.

Grayfox
22nd August 2016, 10:49
Are you sure that your movie has been correctly decrypted? Can you play that playlist 00001 in MPC-HC?
Can you also show me mediainfo reports of 00001.m2ts and 00002.m2ts ?

Movie plays fine when decrypted when double clicking on index.bdmv or double clicking on 00001.m2ts , I decrypted it it twice just in case.

00001.m2ts media info

General
ID : 0 (0x0)
Complete name : E:\BDMV\STREAM\00001.m2ts
CompleteName_Last : E:\BDMV\STREAM\00050.m2ts
Format : BDAV
Format/Info : Blu-ray Video
File size : 40.8 GiB
Duration : 3 s 968 ms
Overall bit rate mode : Variable
Overall bit rate : 88.3 Gb/s
Maximum Overall bit rate : 48.0 Mb/s

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 3 frames
Codec ID : 27
Duration : 4 s 4 ms
Bit rate : 84.8 Gb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 (24000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 1704.834
Stream size : 39.5 GiB (97%)

Audio #1
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : PCM
Format settings, Endianness : Big
Format settings, Sign : Signed
Muxing mode : Blu-ray
Codec ID : 128
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 4 608 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Bit depth : 16 bits
Delay relative to video : -1 ms
Stream size : 2.18 MiB (0%)

Audio #2
ID : 4353 (0x1101)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Delay relative to video : -9 ms
Stream size : 310 KiB (0%)

Audio #3
ID : 4354 (0x1102)
Menu ID : 1 (0x1)
Format : DTS
Format/Info : Digital Theater Systems
Format profile : ES Matrix / Core
Mode : 16
Format settings, Endianness : Big
Codec ID : 130
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 1 509 kb/s
Channel(s) : 7 channels / 6 channels
Channel positions : Front: L C R, Side: L R, Back: C, LFE / Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 93.750 FPS (512 spf)
Bit depth : 24 bits
Compression mode : Lossy
Delay relative to video : -9 ms
Stream size : 731 KiB (0%)

Audio #4
ID : 4355 (0x1103)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Delay relative to video : -9 ms
Stream size : 310 KiB (0%)

Audio #5
ID : 4356 (0x1104)
Menu ID : 1 (0x1)
Format : DTS
Format/Info : Digital Theater Systems
Format profile : ES Matrix / Core
Mode : 16
Format settings, Endianness : Big
Codec ID : 130
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 1 509 kb/s
Channel(s) : 7 channels / 6 channels
Channel positions : Front: L C R, Side: L R, Back: C, LFE / Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 93.750 FPS (512 spf)
Bit depth : 24 bits
Compression mode : Lossy
Delay relative to video : -9 ms
Stream size : 731 KiB (0%)

Audio #6
ID : 4357 (0x1105)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Delay relative to video : -9 ms
Stream size : 310 KiB (0%)

Text #1
ID : 4608 (0x1200)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #2
ID : 4609 (0x1201)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #3
ID : 4610 (0x1202)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Delay relative to video : 8 s 342 ms

Text #4
ID : 4611 (0x1203)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Delay relative to video : 8 s 342 ms

Text #5
ID : 4612 (0x1204)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #6
ID : 4613 (0x1205)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #7
ID : 4614 (0x1206)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #8
ID : 4615 (0x1207)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Delay relative to video : 9 s 801 ms

Text #9
ID : 4616 (0x1208)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Delay relative to video : 8 s 342 ms

Text #10
ID : 4617 (0x1209)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #11
ID : 4618 (0x120A)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Delay relative to video : 8 s 342 ms

Text #12
ID : 4619 (0x120B)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Delay relative to video : 8 s 342 ms

Text #13
ID : 4620 (0x120C)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #14
ID : 4621 (0x120D)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #15
ID : 4622 (0x120E)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Grayfox
22nd August 2016, 10:50
Are you sure that your movie has been correctly decrypted? Can you play that playlist 00001 in MPC-HC?
Can you also show me mediainfo reports of 00001.m2ts and 00002.m2ts ?

Hit the 16,000 char limit so split post into 2.

00002.m2ts media info

General
ID : 0 (0x0)
Complete name : E:\BDMV\STREAM\00002.m2ts
CompleteName_Last : E:\BDMV\STREAM\00050.m2ts
Format : BDAV
Format/Info : Blu-ray Video
File size : 8.93 GiB
Duration : 3 s 968 ms
Overall bit rate mode : Variable
Overall bit rate : 19.3 Gb/s
Maximum Overall bit rate : 48.0 Mb/s

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Codec ID : 27
Duration : 4 s 54 ms
Bit rate : 18.6 Gb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 (24000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 373.426
Stream size : 8.74 GiB (98%)

Audio #1
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Stream size : 310 KiB (0%)

Audio #2
ID : 4353 (0x1101)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Stream size : 310 KiB (0%)

Audio #3
ID : 4354 (0x1102)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Stream size : 310 KiB (0%)

Audio #4
ID : 4355 (0x1103)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Stream size : 310 KiB (0%)

Audio #5
ID : 4356 (0x1104)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Stream size : 310 KiB (0%)

Audio #6
ID : 4357 (0x1105)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 3 s 968 ms
Bit rate mode : Constant
Bit rate : 640 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 spf)
Compression mode : Lossy
Stream size : 310 KiB (0%)

Text #1
ID : 4608 (0x1200)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #2
ID : 4609 (0x1201)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #3
ID : 4610 (0x1202)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #4
ID : 4611 (0x1203)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #5
ID : 4612 (0x1204)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #6
ID : 4613 (0x1205)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #7
ID : 4614 (0x1206)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #8
ID : 4615 (0x1207)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #9
ID : 4616 (0x1208)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #10
ID : 4617 (0x1209)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #11
ID : 4618 (0x120A)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #12
ID : 4619 (0x120B)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #13
ID : 4620 (0x120C)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #14
ID : 4621 (0x120D)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Text #15
ID : 4622 (0x120E)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144

Atak_Snajpera
22nd August 2016, 13:16
@Grafox
This is what I suspected.
Audio 1 in first file is PCM while in second file is AC-3.

I'm afraid you will have to manually separate those streams in some Eac3toGUI or in MKVToolnix.

wraith
22nd August 2016, 14:08
Hi. I've saved a couple videos [due to Fraps 30sec limitation] to here: https://1drv.ms/f/s!Aszu1bOAzXDajgMAgzV9w6eDDWjK.

The first video is the initial setup [copy video to temp directory etc]. The second video is copy the shared files etc. It "crashes out" just after the video stops

Atak_Snajpera
22nd August 2016, 16:49
Hi. I've saved a couple videos [due to Fraps 30sec limitation] to here: https://1drv.ms/f/s!Aszu1bOAzXDajgMAgzV9w6eDDWjK.

The first video is the initial setup [copy video to temp directory etc]. The second video is copy the shared files etc. It "crashes out" just after the video stops

Do not press manually ON button. (I'm even surprised that you are actually able to do that because on my machine it is impossible). Encoding client will connect with specified servers automatically.

wraith
23rd August 2016, 00:02
Do not press manually ON button. (I'm even surprised that you are actually able to do that because on my machine it is impossible). Encoding client will connect with specified servers automatically.

Noted :)
FYI - the error occurs regardless whether I manually click the 'ON' button or not

Atak_Snajpera
23rd August 2016, 13:40
Noted :)
FYI - the error occurs regardless whether I manually click the 'ON' button or not

Use this version of EncodingClient.exe (http://www.mediafire.com/download/xy66s7t686az95g/EncodingClient.exe) and show me error message in EncodingClient_crash_message.txt

wraith
24th August 2016, 13:19
Use this version of EncodingClient.exe (http://www.mediafire.com/download/xy66s7t686az95g/EncodingClient.exe) and show me error message in EncodingClient_crash_message.txt

Downloaded the above file into the RipBot directory. The program continues to crashes out. No EncodingClient_crash_message.txt can be found in either the job1 folder or the Ripbot folder. Should I be looking somewhere else?

If it helps, the contents of job1_log.txt follows:

D:\>"D:\Ripbot\EncodingClient.exe" "D:\Temp\RipBot264temp\job1\job1_EncodingClient.meta"

D:\>"D:\Ripbot\tools\mkvtoolnix\mkvmerge.exe" -o "D:\Trial.mkv" --compression 0:none --title "Trial" --default-duration 0:24000/1001fps "D:\Temp\RipBot264temp\video.265" --compression 0:none --language 0:eng --sync 0:0 "D:\Temp\RipBot264temp\job1\1_audio_English.ac3" --chapters "D:\Temp\RipBot264temp\job1\chapters.txt"
mkvmerge v9.3.1 ('Mask Machine') 32bit
Error: The file 'D:\Temp\RipBot264temp\video.265' could not be opened for reading: open file error.
-------------------------

Elapsed Time: 00h:00m:30s

Incidentally, the first file I tried was a small 2Gb H265 video. I ripped a small 300Mb+ file using MakeMKV and tried that. Still the same issue.

stasi
25th August 2016, 18:26
Hey Atak.
Drag and Drop into RipBot window would be nice. Any plans for that?

wraith
25th August 2016, 23:04
Use this version of EncodingClient.exe (http://www.mediafire.com/download/xy66s7t686az95g/EncodingClient.exe) and show me error message in EncodingClient_crash_message.txt

Hi Atak,
Tried the EncodingClient provided. Still crashed and no .txt file was created. Not that I could find in the job1 or Ripbot folder.

I created a more detailed reply but this has not made it to the forum, for some reason. I can only assume it's been flagged for review [I tried to re-create the post, via copy and paste, and I was informed it was a duplicate]

wraith
26th August 2016, 13:46
Hi Atak. Tried, again, with the EncodingClient provided. No luck. Same issue and no txt file is created. Not in the Ripbot or job1 file anyway.

I created a detailed post a few days ago. I suspect that, as it was quote of yours with the link to the EncodingClient, it has yet to be released. Not being sure when it would be, I decided to post again. Apologies to the Moderator if this is the case.

Atak_Snajpera
26th August 2016, 19:10
So I guess something else is terminating EncodingClient.exe. If EncodingClient.exe crashes it should generate file with error message. No .txt means no crash.

Jake802
26th August 2016, 20:21
I have a question I am using the Onboard Realtek Audio from an ASUS 970 Pro Gaming/Aura Motherboard. It has worked with No Issues, the minute I start encoding with RipBot264, the audio goes from being all crackly to completely losing audio at times and I have to uninstall and reinstall the drivers. Any ideas as to why this would occur? Thanks!

Atak_Snajpera
27th August 2016, 11:19
Update audio drivers
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false

Zetti
27th August 2016, 13:19
Why is there still needed for both FFDshow and Haali Media Splitter and not LAV Filters??

Any plans for change??

Atak_Snajpera
27th August 2016, 13:49
If ain't broke don't fix it

Zetti
27th August 2016, 14:40
I know but me and maybe other just use LAV Filters and not FFDshow, Haali Media Splitter and Lav Filters or just FFDshow and Haali Media Splitter.

fantasmanegro
30th August 2016, 14:04
I know but me and maybe other just use LAV Filters and not FFDshow, Haali Media Splitter and Lav Filters or just FFDshow and Haali Media Splitter.

From your point of view...

what is the benefit or advantage of using LAV or FFDSHOW over Haali??...

Zetti
30th August 2016, 16:14
I don't use FFDshow and Haali Media Splitter anymore, because its not updated in some years.

And i don't want to have different decoders and splitters, i think also others have same point of view like me.

But maybe a day Atak_Snajpera will make an option for chose between FFDshow and Haali Media Splitter or LAV Filters.

fantasmanegro
30th August 2016, 17:57
I don't use FFDshow and Haali Media Splitter anymore, because its not updated in some years.

And i don't want to have different decoders and splitters

I agree with that... :goodpost:

klopsknoedel
1st September 2016, 11:34
But maybe a day Atak_Snajpera will make an option for chose between FFDshow and Haali Media Splitter or LAV Filters.

I think that is the point. There is no need to switch completely but giving an (hidden) option to choose LAV could satisfy both sites.

Zetti
1st September 2016, 15:18
Absolutely. :)

soneca
4th September 2016, 01:49
So far I do not use Lav Filters, but I think the Atak should take into consideration this update.

nekrosoft13
14th September 2016, 17:28
any chance could you add Flac audio support?

Ronski
24th September 2016, 08:24
I started a batch distributed encode going this morning, added the two files I was working with and set it going.

I noticed that the encoding client was alternating between encoding and not for all three servers, I looked in the server window and found an error of file not found, so aborted it. It then carried on with the next job.

Looking in the Ripbot window I saw an error for Job 2 and realised what had happened, job 1 and 2 were old jobs which I hadn't cleared off the list, but I'd deleted the source files, I must have inadvertently ticked job 2 thus adding it to the batch job.

I use the option to move the source file, so surely an error should have been logged here if the file is missing and the job skipped rather than trying to encode it?

BlockABoots
24th September 2016, 10:04
Im trying to preview my script (via the AviSynth button) but when i click on the preview i get the following.....

http://i.imgur.com/hY26iKp.jpg

anu ideas how to fix that?

Also is there a way to increase or increase the Audio Delay option manual, other than the 50 value increments ?

Atak_Snajpera
24th September 2016, 14:26
1) Activate YV12 decoder in FFDShow
http://i.cubeupload.com/20R9pU.png

2) manually change value in script
http://i.cubeupload.com/Dvd2st.png

BlockABoots
25th September 2016, 00:53
Thanks!

burt123
26th September 2016, 12:53
Have been trying the process Warcraft 3D, which has TrueHD ATMOS 7.1 audio (as well as an AC3 track), and when trying to prepare for encoding, it states that it's converting ATMOS to flac, but after quite a long time, it fails.

Any hints ??

Also, I've also noticed that the embedded version of MKVToolNix is v9.3.1, whereas the latest version is 9.4.2.....

Ronski
27th September 2016, 10:18
@Burt123 I use MKVTOOLNIX to extract just the video, then process that, then use MKVToolnix to mux the audio, subtitles, chapters etc back in. This way I retain the Atmos and audio tracks exactly as they are as I have an Atmos system, but the audio is usually bigger than the video part using H265.

zazon
28th September 2016, 08:25
Hey Everybody -

The last couple Blu rays I've bought seem to have the audio off for a half second or so for last half of the movie. Anything I can look into to fix this? Thanks for any help.

Jake802
30th September 2016, 04:25
I am have this problem lately too. Stuff is finishing out of sync.

slalom
30th September 2016, 13:17
Check fps on job window. If it is not correct, press Avisynth, then >, and select output speed, assume -> x.xx fps
Re-run the job

Jake802
1st October 2016, 19:00
Thanks I will try that, Thanks again for the help.

Jake802
1st October 2016, 19:16
I am having a problem with the cover option too. I hit the Cover Button and I get a Popup JPEG Error 53 Msg, Hit Ok and then the Cover Search Option comes up. I do my search and when I select my choice, I then get a popup with an Cannot Open AVI Msg. I hit OK and the whole thing freezes up.

zazon
4th October 2016, 06:29
Check fps on job window. If it is not correct, press Avisynth, then >, and select output speed, assume -> x.xx fps
Re-run the job

Thank you for the reply. If the movie is synced for the first half, but not the second half, how would changing the FPS fix this? I'm assuming FPS is a constant, though I don't know much. Thanks again.

slalom
4th October 2016, 09:50
My suggestion was in the case where the fps where different in the job and the file
I can't help you with the other

magmo23
9th October 2016, 13:58
If the solution is to unistall codecs then how am I supposed to be able to use the ripbot264 application?

AviSynth Error message or other decoding problem (avs2avi.exe/avs2yuv.exe crashes)
Uninstall all codec packs , AviSynth , Haali Media Spliter , ffdshow. XP users also must install Windows Media Player 11!

Atak_Snajpera
10th October 2016, 15:23
Just install what is required by RipBot264. Nothing more , nothing less.

byteshare
10th October 2016, 20:05
Any chance to include QTGMC (3.33) for better Deinterlace/decomb?
Or Temporal Degrain for better denoise?
Both are filters for AVISynth and AVISynth+
----
Or, any help on how to make it work myself. I know I can manually edit the avisynth script, but I don't know how to make it work with Distributed Encoding (so that all the right plugins get to the other machines.

klopsknoedel
11th October 2016, 08:51
If the solution is to unistall codecs then how am I supposed to be able to use the ripbot264 application?

AviSynth Error message or other decoding problem (avs2avi.exe/avs2yuv.exe crashes)
Uninstall all codec packs , AviSynth , Haali Media Spliter , ffdshow. XP users also must install Windows Media Player 11!

This should help to solve your problems: http://forum.doom9.org/showthread.php?p=1524496#post1524496

byteshare
11th October 2016, 21:23
I am have this problem lately too. Stuff is finishing out of sync.
I've been having this issue as well with some jobs.
As others have suggested it was the FPS being different. I just changed the FPS in MKVtoolNix and that fixed my problem without having to re-do my job.
I has also seen the issue where the audio gets stretched, ie double or more.
For the later issue I just use another program to process the audio or copy in the source audio and call it a day.

ismail0100
14th October 2016, 00:18
Today try this pro for hevc 10bit and i like it. Thank u :)

magmo23
15th October 2016, 13:31
Just install what is required by RipBot264. Nothing more , nothing less.

But thats what I have done, and the errors occures anyway. I dont get it?

Atak_Snajpera
15th October 2016, 13:35
But thats what I have done, and the errors occures anyway. I dont get it?

What error? Screenshots?

lemaireus
24th October 2016, 15:23
Each time I load a video with 224kbps E-AC-3 track into Ripbot I get the following error:

https://s12.postimg.org/4x9pc88jh/E_AC3_Decoding_Error.jpg

The source is .mkv video with 224k E-AC-3 audio (for some reason E-AC-3 640k does not create any problem). The only way out then is to load the video after demuxing the audio track, and remux the audio once the video has been encoded. The audio works perfectly well using this workaround.

Any ideas? The AC-3 header problem appears only when loading the file in Ripbot: Mediainfo works fine with the same file, as does playback, and MKVToolnix processing.

byteshare
24th October 2016, 20:15
Any ideas? The AC-3 header problem appears only when loading the file in Ripbot: Mediainfo works fine with the same file, as does playback, and MKVToolnix processing.
Try re-muxing it with most recent MKVToolnix, and if that doesn't work remux it without audio and use another application to process audio. I've had this issue from time to time.
This last part is only a temporary solution, hopefully Atak_Snajpera can figure it out and fix.

sneaker_ger
24th October 2016, 20:36
Is it trying to use nicaudio? I think nicaudio never got E-AC-3/DD+ support so you need to use a different audio source filter.

lemaireus
25th October 2016, 04:35
Try re-muxing it with most recent MKVToolnix...
This last part is only a temporary solution, hopefully Atak_Snajpera can figure it out and fix.

That is exactly what I have been doing, as I mentioned in my post: I demux the audio, encode the video, and then mux the original audio back in using MKVToolnix. But I was hoping may be someone has been able to find a better solution via an audio decoder update?

Is it trying to use nicaudio? I think nicaudio never got E-AC-3/DD+ support so you need to use a different audio source filter.

I don't think Ripbot is using nicaudio for audio processing, is it? Also, I don't get the issue when the audio is 640k E-AC-3/DD+.

sneaker_ger
25th October 2016, 06:31
I don't think Ripbot is using nicaudio for audio processing, is it?
I believe it's still shipped but I don't know when it is used. There should be a log or scripts available to show it, right?

lemaireus
25th October 2016, 13:06
I believe it's still shipped ...

Nic audio comes as one of the Avisynth plugins. My point is that if an audio decoder's inability to handle E-AC-3/DD+ is creating the issue then I should run into the same issue in a file with a 6 channel 640k E-AC-3 audio as well. However, that works fine. The issue crops up when the audio is two channel/stereo at 224k.

I have a file with 224k stereo E-AC-3 audio lying around. Will load that sometime after the present encode finishes (x265, will take a good 12 hours or so), and will see and post if there is anything worth note in the log file.

lemaireus
26th October 2016, 17:50
Accidentally deleted the file I referred to in the last post, so will have to wait for another file with stereo 224k E-AC-3 in order to post the log, but since the file isn't even queued by Ripbot I doubt if there will be an error log different from the one I posted in the screenshot in the first message about this issue, on p. 728.

Still looking for ideas on solving this one...

slalom
31st October 2016, 20:28
@ Atak

Is it possible when you right-click on the job jobx, except showing the log, to view the temp file in explorer window?

smuperman
1st November 2016, 10:55
After installing Win 10 Anniversary (Clean Install) I always get AVI2AVS Crashes while trying to use VC1 Sources.

Only necessary Tools for Ripbot are installed: AVISynth 2.60 / ffdshow_rev4532_20140717_clsid / Matroska (all with default install options)

ReInstalled -> Same Problem- Any Ideas?

klopsknoedel
1st November 2016, 11:20
After installing Win 10 Anniversary (Clean Install) I always get AVI2AVS Crashes while trying to use VC1 Sources.

Only necessary Tools for Ripbot are installed: AVISynth 2.60 / ffdshow_rev4532_20140717_clsid / Matroska (all with default install options)

ReInstalled -> Same Problem- Any Ideas?

What you need to do is to choose the Microsoft own VC-1 Codec. FFDSHOW does not work anymore.
To do that please download "Win7DSFilterTweaker" from here (https://www.codecguide.com/windows7_preferred_filter_tweaker.htm) and as said, choose "Microsoft" for VC-1 for both 32-bit and 64-bit.
Remember, you always have to do that after you restarted your machine.

P.S.
Maybe you should uninstall ffdshow completly and reinstall it. During installation (where you see all the checkboxes for each codec) choose Microsoft for VC-1 and maybe you don't have to set it any time again after rebooting. But I haven't tried that for now.

smuperman
1st November 2016, 12:33
I recognized that the setting of ffdshow vc1 change to "wmv9" everytime I start Ripbot. So I am able to fix the problem by using ffdshow settings and change "wmv9" to deactivated after I started RipBot.

If I close Ripbot and start it again, it changes to "wmv9"

Same outcome while using Win7DSFilterTweaker.

ffdshow Install does not activate WMV9 by default. (Installed it and reboot -> ffdshow VC1 Setting: deactivated) Started Ripbot -> Activated -> WMV9.

burt123
1st November 2016, 13:23
Not sure if this is a problem just for me or not, but Update seems to have a problem.

2016-11-01 23:21:50 : Looking for correct UUID link in http://atak-snajpera.5v.pl/
2016-11-01 23:21:50 : [ERROR] NO CONNECTION with http://atak-snajpera.5v.pl/
2016-11-01 23:21:50 : Searching for UUID link with DuckDuckGo...
2016-11-01 23:21:52 : [ERROR] NO CONNECTION with DuckDuckGo search engine.
2016-11-01 23:21:52 : No results.

Atak_Snajpera
1st November 2016, 16:18
@ Atak
Is it possible when you right-click on the job jobx, except showing the log, to view the temp file in explorer window?
No problem.

If I close Ripbot and start it again, it changes to "wmv9"
It automatically changes to wmv9 because for Win7/Win8 microsoft's VC1 decoder is better. Last Time I checked libavcodec couldn't decode interlaced VC-1. I will check for solution on Virtual machine.


Not sure if this is a problem just for me or not, but Update seems to have a problem.

2016-11-01 23:21:50 : Looking for correct UUID link in http://atak-snajpera.5v.pl/
2016-11-01 23:21:50 : [ERROR] NO CONNECTION with http://atak-snajpera.5v.pl/
2016-11-01 23:21:50 : Searching for UUID link with DuckDuckGo...
2016-11-01 23:21:52 : [ERROR] NO CONNECTION with DuckDuckGo search engine.
2016-11-01 23:21:52 : No results.

Works fine in my case
2016-11-01 16:17:18 : =========================[UPDATER ACTIVATED]=========================
2016-11-01 16:17:18 : Looking for correct UUID link in http://forum.doom9.org/showthread.php?t=127611
2016-11-01 16:17:18 : [SUCCESS] http://forum.doom9.org/showthread.php?t=127611 has correct UUID link a5e3e5d3-67da-4504-950a-4963b18b0a3a
2016-11-01 16:17:18 : Downloading update file http://atak-snajpera.5v.pl/ripbot264update/update.zip
2016-11-01 16:17:18 : [SUCCESS] C:\Users\Dave\Documents\Delphi_Projects\RipBot264\_Compiled\Updates\update.zip saved!

smuperman
1st November 2016, 18:34
It automatically changes to wmv9 because for Win7/Win8 microsoft's VC1 decoder is better. Last Time I checked libavcodec couldn't decode interlaced VC-1. I will check for solution on Virtual machine.

So WMV9 ist pure Microsoft? But why does changing to "deactivated" (ffdshow Settings) or using Win7DSFilterTweaker "Microsoft" instead of "ffdshow" option after starting Ripbot fix the problem?

I will put my Backup System prior Anniversary on another SSD an will give Feedback.

Atak_Snajpera
1st November 2016, 19:05
I have installed Windows 10.0.14393 on Virtual Machine and VC-1 sources work fine with WMV9 and libavcodec
https://i.imgsafe.org/8d97586e8f.png

smuperman
1st November 2016, 20:04
I will send you a Youtube link of my VMWare test.

slalom
1st November 2016, 21:25
No problem.
:thanks: you're the best!

burt123
3rd November 2016, 01:03
Works fine in my case
2016-11-01 16:17:18 : =========================[UPDATER ACTIVATED]=========================
2016-11-01 16:17:18 : Looking for correct UUID link in http://forum.doom9.org/showthread.php?t=127611
2016-11-01 16:17:18 : [SUCCESS] http://forum.doom9.org/showthread.php?t=127611 has correct UUID link a5e3e5d3-67da-4504-950a-4963b18b0a3a
2016-11-01 16:17:18 : Downloading update file http://atak-snajpera.5v.pl/ripbot264update/update.zip
2016-11-01 16:17:18 : [SUCCESS] C:\Users\Dave\Documents\Delphi_Projects\RipBot264\_Compiled\Updates\update.zip saved!


Well, it's working fine again...did nothing.

byteshare
4th November 2016, 18:32
-I've been able to add a custom filter to RipBot by editing the AVIsynth script as such:
This is for QTGMC (3.33) for better Deinterlace/decomb.
#Deinterlace
#LoadCplugin("C:\RipBot264v1.19.4\Tools\AviSynth plugins\Yadif\Yadif.dll")
#video=yadif(video,mode=1,order=1)
LoadPlugin("C:\RipBot264v1.19.4\Tools\AviSynth plugins\RepairSSE2.dll")
LoadPlugin("C:\RipBot264v1.19.4\Tools\AviSynth plugins\RemoveGrainSSE2.dll")
LoadPlugin("C:\RipBot264v1.19.4\Tools\AviSynth plugins\nnedi3.dll")
LoadPlugin("C:\RipBot264v1.19.4\Tools\AviSynth plugins\masktools2.dll")
LoadPlugin("C:\RipBot264v1.19.4\Tools\AviSynth plugins\mvtools2.dll")
LoadPlugin("C:\RipBot264v1.19.4\Tools\AviSynth plugins\yadif.dll")
Import("QTGMC-3.33.avsi")
video=QTGMC(video,Preset="Slow", ShowSettings=false, FPSDivisor=2)

This is for MDegrain2 for better denoise.
#Denoise
LoadPlugin("C:\RipBot264v1.19.4\Tools\AviSynth plugins\mvtools2.dll")
LoadPlugin("C:\RipBot264v1.19.4\Tools\AviSynth plugins\flash3kyuu_deband.dll")
super = MSuper(pel=2)
bv1 = video.MAnalyse(super, isb = true, delta = 1, overlap=4)
fv1 = video.MAnalyse(super, isb = false, delta = 1, overlap=4)
bv2 = video.MAnalyse(super, isb = true, delta = 2, overlap=4)
fv2 = video.MAnalyse(super, isb = false, delta = 2, overlap=4)
video=video.MDegrain2(super,bv1,fv1,bv2,fv2,thSAD=400).f3kdb()

This is for MDegrain3 for even more/better denoise.
#Denoise
LoadPlugin("C:\RipBot264v1.19.4\Tools\AviSynth plugins\mvtools2.dll")
LoadPlugin("C:\RipBot264v1.19.4\Tools\AviSynth plugins\flash3kyuu_deband.dll")
super = MSuper(pel=2)
bv1 = video.MAnalyse(super, isb = true, delta = 1, overlap=4)
fv1 = video.MAnalyse(super, isb = false, delta = 1, overlap=4)
bv2 = video.MAnalyse(super, isb = true, delta = 2, overlap=4)
fv2 = video.MAnalyse(super, isb = false, delta = 2, overlap=4)
bv3 = video.MAnalyse(super, isb = true, delta = 3, overlap=4)
fv3 = video.MAnalyse(super, isb = false, delta = 3, overlap=4)
video=video.MDegrain3(super,bv1,fv1,bv2,fv2,bv3,fv3,thSAD=400).f3kdb()

These all seem to work with Distributed Encoding, I say seems because sometimes the info.txt (FPS and such) gets deleted after editing the script the GetInfo.avs seems to mess up somehow. I don't have this issue if you don't need to "cut up" the video (small clips).

Atak_Snajpera
4th November 2016, 19:04
You have to provide error message.

byteshare
4th November 2016, 19:25
You have to provide error message.

There was no error, but I figure it out. I had to remove the "Video." from "super = video.MSuper(pel=2)"
I updated all of the syntax. If you want I can send you the files I used if you're interested in adding these feature to RipBot or you can also download the files from their official sources.

Atak_Snajpera
4th November 2016, 21:46
Ok. Send me those files because I'm lazy bastard ;)

byteshare
4th November 2016, 22:04
Ok. Send me those files because I'm lazy bastard ;)
Sent them to you in a personal message.

byteshare
8th November 2016, 18:48
These all seem to work with Distributed Encoding, I say seems because sometimes the info.txt (FPS and such) gets deleted after editing the script the GetInfo.avs seems to mess up somehow. I don't have this issue if you don't need to "cut up" the video (small clips).
I think I have a better idea where the issue is, but don't know why...
When I edit the script in RipBot (during edit mode) it looks like:
#VideoSource
video=DirectShowSource("C:\Intel\Other\!-Files-!\temp\example.mkv",audio=false).ConvertToYV12()

But when RipBot goes to package everything for Distrubuted Encoding it converts the code to:
#VideoSource
LoadPlugin("\\I2QB3_6T9QF02\RipBot264temp\Tools\AviSynth plugins\ffms\ffms2.dll")
video=FFVideoSource("\\I2QB3_6T9QF02\RipBot264temp\job1\video.mkv",threads=1)

When I run the same script with only those different in AvsPmod I get an error with QTGMC (line 377)

Also update on the script I used I found when using AvsPmod that the MDegrain2/3 wasn't working I needed to
add back the video. and remove it from the others like so:
super = video.MSuper(pel=2)
bv1 = MAnalyse(super, isb = true, delta = 1, overlap=4)
fv1 = MAnalyse(super, isb = false, delta = 1, overlap=4)
bv2 = MAnalyse(super, isb = true, delta = 2, overlap=4)
fv2 = MAnalyse(super, isb = false, delta = 2, overlap=4)
video=MDegrain2(super,bv1,fv1,bv2,fv2,thSAD=400).f3kdb()
But either way the info.txt issue is stopping me from doing a full test with Distributed Encoding.

Update: When I changed my test file from a RGB to a YV12 color source I didn't get the info.txt issue.

squezer
8th November 2016, 19:52
Hi,

how to disable automatic conversion of TrueHD to FLAC ?
I do not want it (FLAC) nor need it.
I prefer bitstreaming of TrueHD, so it is just a wasting of time...

Thanks :)

Ronski
9th November 2016, 11:14
@squeezer. I found the same problem, so I use MKVTOOLNIX to extract just the video, then process that with Ripbot then use MKVToolnix to mux the audio, subtitles and chapters back in that I require.

There should be a way in ripbot to select/keep what's required but I couldn't find it.

byteshare
9th November 2016, 19:51
Hi,

how to disable automatic conversion of TrueHD to FLAC ?
I do not want it (FLAC) nor need it.
I prefer bitstreaming of TrueHD, so it is just a wasting of time...

Thanks :)

Does doing selecting "Copy Audio" help?

squezer
9th November 2016, 23:21
Does doing selecting "Copy Audio" help?

no, because it is AFTER the conversion...

Tazlord
10th November 2016, 08:51
Hello,
First of all, I love this app.
I've been using it for a while and it just gets better and better with each revision...
So, thank you!

Issue:
The distributed encoding network configuration mechanism seems to be broken in 1.19.4.
Whenever I set up other computers as encoding servers, they eventually time out and never actually connect to the master host.
There are errors of the timeouts being reported in the server console.

https://s14.postimg.org/ldgxefqr5/2016_11_09_232007_000008.jpg

I took the liberty of doing a packet capture and I noticed that the IP the encoding server is being instructed to connect to isn't on my local subnet (see line 30 in packet capture).
In fact, it looks like the IP also matches the IP being displayed on the master host's encoding server console.

Slave encoder network capture:
https://s14.postimg.org/pnvla0vu9/2016_11_09_232058_000009.jpg

Master host server console:
https://s13.postimg.org/eew3fr0wn/2016_11_09_23_32_17_Master_Host.jpg

I looked at the Distributed Encoding settings on the master host and the first server in the list is the localhost, 127.0.0.1.
Although that is a valid IP for the localhost, I think it's actually causing an issue with control messages being sent to the slaves.
You can see the control message in the TCP stream below instructing it to connect to an invalid IP address.

https://s14.postimg.org/cc9u4jfnl/2016_11_09_234336_000010.jpg

I tried changing that IP in the settings to the actual IP address of the master host but it didn't fix it.
Also, I tried looking for that IP in all of the INI files but it doesn't seem to be in any of those files.
I don't know if this IP is hard set in the code so I figured I'd send this post so you were aware of the issue.
Maybe it's a simple fix and recompile?

Atak_Snajpera
10th November 2016, 13:56
Do you have mutiple network adapters (Phisical/Virtual) installed in your main pc?

Tazlord
10th November 2016, 16:12
Do you have mutiple network adapters (Phisical/Virtual) installed in your main pc?
There are physically 2 built into the motherboard but only 1 is actually enabled. I think I should mention that distributed encoding worked fine until I upgraded to 1.19.4.

EDIT:
After this post I decided to look and make sure my 2nd NIC was disabled. I found out there are actually 2 new network adapters in my system. I believe they were installed by VMware, which I happened to install around the same time I upgraded RipBot. I disabled them and it works now. THANKS!

I don't suppose there's a way to add an interface selector to RipBot? I would imagine I'm not the only person who might be running more than 1 network adapter.

Thanks again for all the help!

Atak_Snajpera
10th November 2016, 16:28
I haven't changed anything in code. Besides As you can see I'm not being flooded with the same error from other users.
Can you show me what you have in ipconfig /all ?

Atak_Snajpera
10th November 2016, 16:38
don't suppose there's a way to add an interface selector to RipBot? I would imagine I'm not the only person who might be running more than 1 network adapter.
Try this method
https://support.microsoft.com/en-us/kb/2526067

Tazlord
10th November 2016, 16:49
Try this method
https://support.microsoft.com/en-us/kb/2526067
Thanks, I'll give that a try.

If you have a spare moment, occasionally I'm running into something I like to call the "99 loop" when using distributed encoding. Once in a while a chunk will try to encode at bitrate 99 (not 99k, just 99) or similar and the encoder will fail because that is too low. I'm assuming it's probably during the credit roll of some movies and the ABR algorithm probably doesn't see much need to use a higher bitrate. That's just my assumption. Aborting the process just recreates the chunks and doesn't solve the issue. The only way for me to fix it is to edit that chunk's CMD file and replace all instances of "--bitrate 99" with something like "--bitrate 9900" and save the file without aborting the process.
I was considering lowering the BDO to 1 or increasing the chunk size to 120 to get more real content in the clip but I figured I'd ask you first just in case you're not aware of this.

Thanks again!

Atak_Snajpera
10th November 2016, 16:52
Thanks, I'll give that a try.

If you have a spare moment, occasionally I'm running into something I like to call the "99 loop" when using distributed encoding. Once in a while a chunk will try to encode at bitrate 99 (not 99k, just 99) or similar and the encoder will fail because that is too low. I'm assuming it's probably during the credit roll of some movies and the ABR algorithm probably doesn't see much need to use a higher bitrate. That's just my assumption. Aborting the process just recreates the chunks and doesn't solve the issue. The only way for me to fix it is to edit that chunk's CMD file and replace all instances of "--bitrate 99" with something like "--bitrate 9900" and save the file without aborting the process.
I was considering lowering the BDO to 1 or increasing the chunk size to 120 to get more real content in the clip but I figured I'd ask you first just in case you're not aware of this.

Thanks again!

Interesting... Send me whole Job folder (ofcourse without any heavy files like .264 .mkv audio and so on )

Tazlord
12th November 2016, 22:03
Interesting... Send me whole Job folder (ofcourse without any heavy files like .264 .mkv audio and so on )
I tried to go back and re-rip a title I thought was giving me this problem but everything worked fine this time. I know it happens about 10% of the time so I'm sure to run into it again. I'll update you when it happens.

EDIT:
I should mention that I only do 2-pass encoding and this has only happened on the 2nd pass, after the "proper" ABR has been modified for encoding.

I think a good workaround would be to parse the command line scripts of all the chunks before the 2nd pass encoding starts and replace any bitrates below a threshold with a set minimum. For instance, if a threshold of 512 is met then encode this chunk at a minimum of 50% of the requested bitrate but no less than the threshold.

Just a suggestion.

Atak_Snajpera
13th November 2016, 11:12
the problem is set hard limit to 100 kbps in code. If calculated bitrate is lower than 100 then inject value 100. No idea why you got 99???

Tazlord
13th November 2016, 17:10
the problem is set hard limit to 100 kbps in code. If calculated bitrate is lower than 100 then inject value 100. No idea why you got 99???
Really? Interesting. When this happens it's almost always 99. A few times I saw 98.
It just happened again today. This time it happened on the first chunk. I've never seen that before.

Here's a link to the job folder (13.7 MB):
https://file.io/2rB7vf

burt123
15th November 2016, 13:09
Hi Atak,

Just got a huge update download (approx 115Mb), and now it's 1.19.5, but there seems to be several new features.

Are you going to post some release notes/change log, etc ??

Cheers

byteshare
15th November 2016, 20:42
Hi Atak,

Just got a huge update download (approx 115Mb), and now it's 1.19.5, but there seems to be several new features.

Are you going to post some release notes/change log, etc ??

Cheers

I'm sure Atak will, but two of the new features I can confirm are GTGMC for better deinterlace/comb and MDgrain2 for better noise removal (hopefully we'll get MDegrain3 at some point?), which is awesome. Thank you so much!!
Update: You can manually do MDgrain3, can confirm works.

byteshare
15th November 2016, 22:17
Question about batch mode and interlace:
-Is there option somewhere I'm missing to say no audio like I get when I do 1 file at a time?

-For Deinterlace in RipBot why do I not get the option for some files? (greyed out and the drop down list won't show when clicked on)
-Side things once I enable QTGMC instead of Yadif are the best options (when I get them) to pick:
------Deinterlace: Inverse Telecine
------Decimate: Restore (ie 23.976 FPS)

Atak_Snajpera
16th November 2016, 00:30
Deinterlace option is disabled if fps is other than 25 or 29.97

byteshare
16th November 2016, 18:10
Deinterlace option is disabled if fps is other than 25 or 29.97
Something might be wrong then, because RipBot is showing the FPS is 29.970 (media info too (and constant)) but it doesn't give me the option. However for a video that is 23.976 FPS (media info says is variable FPS) the options were available. I can manually add in the deinterlace code and it works (I made a slight modification):
#Deinterlace
Loadplugin("C:\Intel\other\!2Tools\RipBot264v1.19.5\Tools\AviSynth plugins\Repair\RepairSSE2.dll")
Loadplugin("C:\Intel\other\!2Tools\RipBot264v1.19.5\Tools\AviSynth plugins\RemoveGrain\RemoveGrainSSE2.dll")
Loadplugin("C:\Intel\other\!2Tools\RipBot264v1.19.5\Tools\AviSynth plugins\nnedi3\nnedi3.dll")
Loadplugin("C:\Intel\other\!2Tools\RipBot264v1.19.5\Tools\AviSynth plugins\masktools\masktools2.dll")
Loadplugin("C:\Intel\other\!2Tools\RipBot264v1.19.5\Tools\AviSynth plugins\mvtools\mvtools2.dll")
Import("C:\Intel\other\!2Tools\RipBot264v1.19.5\Tools\AviSynth plugins\Scripts\QTGMC.avs")
video=QTGMC(video,Preset="Slow",FPSDivisor=2)
Don't need the Yadif.dll when the present is Slow.

Update: I can force the deinterlace in batch mode and then for videos that are 29.970 I can change the option. The limit of 25 or 29.97 seems strange with QTGMC, because as far as I understand it there isn't specific FPS limits.

Atak_Snajpera
17th November 2016, 11:22
Have you ever seen footage encoded as 23.976i,24i,30i and so on?

PAL is either 25i or 50p
NTSC is either 29.97i or 59.94p

video=QTGMC(video,Preset="Slow",FPSDivisor=2)
Medium seems to be less blurry and without some artefacts

MEDIUM
https://i.imgsafe.org/d90b26b1ae.png

SLOW (notice artefacts on stairs and on the roof of the black VW Golf. Grass and wall on left is also slightly blurrier)
https://i.imgsafe.org/d90b974b37.png

burt123
17th November 2016, 13:02
Have you ever seen footage encoded as 23.976i,24i,30i and so on?

PAL is either 25i or 50p
NTSC is either 29.97i or 59.94p


Medium seems to be less blurry and without some artefacts

MEDIUM
https://i.imgsafe.org/d90b26b1ae.png

SLOW (notice artefacts on stairs and on the roof of the black VW Golf. Grass and wall on left is also slightly blurrier)
https://i.imgsafe.org/d90b974b37.png

Is that picture taken from out of your window ??? And is that your black Golf ??? (not stalking, just curious)

soneca
17th November 2016, 13:56
Have you ever seen footage encoded as 23.976i,24i,30i and so on?

PAL is either 25i or 50p
NTSC is either 29.97i or 59.94p


Medium seems to be less blurry and without some artefacts

MEDIUM
https://i.imgsafe.org/d90b26b1ae.png

SLOW (notice artefacts on stairs and on the roof of the black VW Golf. Grass and wall on left is also slightly blurrier)
https://i.imgsafe.org/d90b974b37.png

The preset medium is better in my opinion.
Is RipBot264 using this preset by default?

Atak_Snajpera
17th November 2016, 14:05
Is that picture taken from out of your window ??? And is that your black Golf ??? (not stalking, just curious)
nah... It is just a test samples provided by some user long time ago.

Is RipBot264 using this preset by default?
Yes medium preset is used by default. You can verify that in script.

soneca
17th November 2016, 14:19
Atak, sorry for ignorance but where is the preset described in this script? :confused:

#Denoise
Loadplugin("C:\Programas\RipBot264v1.19.4\Tools\AviSynth plugins\mvtools\mvtools2.dll")
super=MSuper(video,pel=2)
fv1=MAnalyse(super,isb=false,delta=1,overlap=4)
bv1=MAnalyse(super,isb=true,delta=1,overlap=4)
fv2=MAnalyse(super,isb=false,delta=2,overlap=4)
bv2=MAnalyse(super,isb=true,delta=2,overlap=4)
video=MDegrain2(video,super,bv1,fv1,bv2,fv2,thSAD=400)

Atak_Snajpera
17th November 2016, 15:04
In settings check 'Use QMTC instead of yadif' and then activate deinterlace.

steferrari
17th November 2016, 16:45
Hello, my RipBot264 just installed some updates, since then it keeps giving me this error, with every video that I try to import.

ConvertToYV12: invalid "matrix" parameter (RGB data only)
(C:\Temp\RipBot264temp\job1\getinfo.avs, line 2)

How can I fix this?
Thanks!

Edit 1: I tried to re-download RipBot (1.19.4) and I could add videos again.
Then I closed and re-launched it, updates was automatically installed (1.19.5) and it started to gave me that error message again.

Edit 2: I reinstalled all codec packs and everything seems fine now, sorry!

byteshare
17th November 2016, 17:31
Have you ever seen footage encoded as 23.976i,24i,30i and so on?

PAL is either 25i or 50p
NTSC is either 29.97i or 59.94p


Medium seems to be less blurry and without some artefacts

MEDIUM
https://i.imgsafe.org/d90b26b1ae.png

SLOW (notice artefacts on stairs and on the roof of the black VW Golf. Grass and wall on left is also slightly blurrier)
https://i.imgsafe.org/d90b974b37.png

Compelling photos. I'll have to do some more testing. I'll be honest I took it more on faith that the slow was better because of someone I know. I usually test these things more myself.

"Have you ever seen footage encoded as 23.976i,24i,30i and so on"
Don't know if I have but I also don't keep a good memory of that stuff. I was having issues with some videos not giving the option, but I figured a way around it by forcing the settings in batch mode, and if they didn't stick just manually copy pasting the code into the AVIscript. Also, my issue could have been a fluke, IDK.
:thanks:

Update: Ran some of my own tests, and indeed. Medium is performing better than Slow.

slalom
22nd November 2016, 11:24
@Atak
on a two-monitor setup with extended desktop when I press the cover button the "download poster" window appears half in each screen (in the middle of the extended display)

not a big problem but I thought I should mention it

burt123
23rd November 2016, 02:53
Hi Atak,
Just got around to updating and using the latest build, and have discovered a strange problem.
When using video preview, instead of the player showing a video, it throws up an error message:-
"The Script's return value was not a video clip, (Is the undefined value)" in red letters.
However, I did a couple without adding a Level Change (eg:-PC-TV), and it previewed a video, BUT if I then added the PC-TV filter, the error message came back.
Any thoughts ???...I'm yet to process said queue, so don't know if error will jeopardize the process.

Update...nothing was processed, just errored the whole queue, have gone back to 1.19.4...

byteshare
24th November 2016, 16:28
Hi Atak,
Just got around to updating and using the latest build, and have discovered a strange problem.
When using video preview, instead of the player showing a video, it throws up an error message:-
"The Script's return value was not a video clip, (Is the undefined value)" in red letters.
However, I did a couple without adding a Level Change (eg:-PC-TV), and it previewed a video, BUT if I then added the PC-TV filter, the error message came back.
Any thoughts ???...I'm yet to process said queue, so don't know if error will jeopardize the process.

Update...nothing was processed, just errored the whole queue, have gone back to 1.19.4...

I've been using 1.19.5 and loving it. My guess is you need to reinstall your AVIsynth and/or codec packs.

Tazlord
25th November 2016, 04:09
the problem is set hard limit to 100 kbps in code. If calculated bitrate is lower than 100 then inject value 100. No idea why you got 99???
Just an update,
This still seems to be an issue. It's interesting because more are showing up as --bitrate 98 now. I wonder what made it change to 98 from 99?

slalom
26th November 2016, 09:19
Is there a problem with downloading posters after today's update?

burt123
26th November 2016, 11:05
I've been using 1.19.5 and loving it. My guess is you need to reinstall your AVIsynth and/or codec packs.

Thanks for the info, but it didn't make any difference, and what codec packs are you referring to ???

One thing tho, if I set up a job in 1.19.4, there's not a problem, and if I then start 1.19.5, it previews & encodes that job, without a problem.

Shrekage
26th November 2016, 16:35
any way to have the temp drive be a share on a network NAS box?

slalom
26th November 2016, 18:47
any way to have the temp drive be a share on a network NAS box?
I think that would be slow
(don't you have a letter on that shared drive?)

Shrekage
26th November 2016, 19:35
slow... my NAS has 4x1G links on a RAID 10. when all the distributed encoders hit my main PC it kills the I/O for my single drive

slalom
27th November 2016, 10:29
Don't you have a letter on that shared drive?

slalom
28th November 2016, 20:23
Yes medium preset is used by default. You can verify that in script.
How can I change that preset??

Shrekage
28th November 2016, 23:06
Slalom, no, because in Windows 10 you have network places since mapping drives is from 1990.

however, I did map a network drive, pointing Ripbot temp folder to it, launching it and finding it could not access the shared drive because it insists on running in the elevated environment, mapping the drive in the elevated environment. adding a job, pressing the go button, and watching it error out...

Just as I expected, the EncodingClient can't share a mapped drive! it errors out immediately after copying the tools there

so what I am asking for is that the temp location can be \\server\share. and then the encoding client can use that as the shared location for all of the files and it can skip trying to share a folder on the machine in that instance...

doing it this way will take all I/O load off of the machine running ripbot, except managing the encodingservers and it's own encoding tasks, and put it on a device made to handle it--the NAS box...

byteshare
1st December 2016, 18:40
How can I change that preset??

Either when adding a video or editing encode settings:
AVISynth > Show Video Script

slalom
1st December 2016, 20:21
At whitch line??

tkwou
3rd December 2016, 18:35
Hi I'm new to this forum. I wish I'd found it sooner. I hadn't used Ripbot264 for about a month. I was on 1.19.4 and it updated to 1.19.5 and I started getting the error. I reverted back to 1.19.4 and then checked each update file until I discovered that is was the Ripbot264.exe (1.19.5) that was causing the problem. I just kept the 1.19.4 version of the file and the program is running fine again. After reading this thread it appears all I needed to do was re-install the codepack. Strangely the core.zip downloads each time I run the program but the Update log says it's corrupt.

=========================
2016-12-03 09:17:51 : Installing updates...
2016-12-03 09:17:51 : [ERROR] C:\Program Files (x86)\Ripbot264\Updates\core.zip is corrupted. CRC32 mismatch. Expected value was 5CAA5F88 but got 8CD50F20
2016-12-03 09:17:51 : File C:\Program Files (x86)\Ripbot264\Updates\core.zip has been deleted.
2016-12-03 09:17:51 : Installation complete.
2016-12-03 09:17:52 : Next check after 2016-12-04 09:14:25

One other thing is that I recently processed a file with a Dolby TrueHD soundtrack and it immediately converted it to flac. I thought this was changed in 1.17.4. Is there something I'm doing wrong. I just want the soundtrack to demux.

[QUOTE=v1.17.4
Added: Demuxing DTS-MA and TrueHD (for those who really need them in mkv container for some reason)

Atak_Snajpera
3rd December 2016, 20:58
Regarding "invalid matrix parameter (RGB data only)" make sure you have AviSynth 2.6 installed. I suppose you are still on pretty old 2.5.8 version.
CRC32 error was most likely caused by incomplete download (lost connection/aborted). Do not worry about that.

Regarding audio topic I will have to check.

Viper714
5th December 2016, 15:50
Hello all. I just noticed something when using Distributed encoding. While encoding in the "Ripbot264 Encoding Client" Window, I can not seem to scroll down the chucks section. Encoding works fine but the scrolling either manually(mouse clicking on scroll-bar, or arrows) or using the mouse wheel will not work. All other dialog windows on the PC work fine. I've encoding 5 movies so far with the same issue.
Is anyone else experiencing this issue??

Wishbringer
5th December 2016, 16:17
I did a fresh install of Win10Pro x64 (14393.447),
installed Avisynth 2.60
ffdshow tryouts rev 4533
Haali Media Splitter (MatroskaSplitter)
Java (newest 32bit release 8u111)

And Ripbot264 (download-link in #1 Post).
Updated Ripbot with Autoupdate.

After creating a job all wen't fine. Whole movie was encoded (was native 16:9 without cropping).
Then I added a movie 2.40:1 and enabled autocrop and resize (1920x800).
Preview didn't work. Encoding failed.

After I removed ".Sharpen()" behind resize-function, preview and encode worked.

I am curious. Isn't "Sharpen()" a buildin-function of avisynth.
Function doesn't seem to exists in my Avisynth.
(downloaded from Avisynth.org/Avisynth.nl)

byteshare
5th December 2016, 16:30
At whitch line??

#Deinterlace
Loadplugin("C:\RipBot264v1.19.5\Tools\AviSynth plugins\Repair\RepairSSE2.dll")
Loadplugin("C:\RipBot264v1.19.5\Tools\AviSynth plugins\RemoveGrain\RemoveGrainSSE2.dll")
Loadplugin("C:\RipBot264v1.19.5\Tools\AviSynth plugins\nnedi3\nnedi3.dll")
Loadplugin("C:\RipBot264v1.19.5\Tools\AviSynth plugins\masktools\masktools2.dll")
Loadplugin("C:\RipBot264v1.19.5\Tools\AviSynth plugins\mvtools\mvtools2.dll")
LoadCplugin("C:\RipBot264v1.19.5\Tools\AviSynth plugins\Yadif\Yadif.dll")
Import("C:\RipBot264v1.19.5\Tools\AviSynth plugins\Scripts\QTGMC.avs")
video=QTGMC(video,Preset="Medium",FPSDivisor=2)
At the last line

byteshare
5th December 2016, 16:32
Hello all. I just noticed something when using Distributed encoding. While encoding in the "Ripbot264 Encoding Client" Window, I can not seem to scroll down the chucks section. Encoding works fine but the scrolling either manually(mouse clicking on scroll-bar, or arrows) or using the mouse wheel will not work. All other dialog windows on the PC work fine. I've encoding 5 movies so far with the same issue.
Is anyone else experiencing this issue??

I though it was just me! I found if you let an encode start and don't click off the window you can still manipulate the scroll and encoding servers, but once I click off I lose control. I can't even click abort in the window, have to do that from the main RipBot window, which always works (don't lose ability to click on items).

Wishbringer
5th December 2016, 16:34
Hm, found another odd behavior:
I am encoding with DE.
Have 8 Server (E3-1240v5 with 64GB Ram each)
When a Encoding server crashes and I close Encoding Server and restart App,
I can't enable that Server in central Encoding Client again.
It is still disabled till end of whole encode.
In next batch it starts as normal enabled.

Seems the "On"-Button in Encoding Client doesn't work.

Encoding-Client chunks window:
I can scroll with middle mouse wheel, but bar and arrows doesn't work.
Like mentioned by byteshare and Viper714.

Viper714
5th December 2016, 17:18
Okay I am not the only one either. Yes, I noticed the same as Wishbriner. None of the ON or OFF buttons work on the Encoding client window. Byteshare, I just tried keeping the window in focus and it does work, but as you said the minute I click outside that window, it looses focus and I can't click on anything else.

Apparently it is loosing focus and can't get it back... :scared:

Atak_Snajpera
5th December 2016, 17:33
What windows version do you use?

I've just checked on my Win7 x64 and scroll bars work during encoding as well as all buttons ON/OFF/Abort.

Viper714
5th December 2016, 17:53
What windows version do you use?

I've just checked on my Win7 x64 and scroll bars work during encoding as well as all buttons ON/OFF.

Windows 10. Used to work okay about 6 months ago. Not sure what changed

Atak_Snajpera
5th December 2016, 18:11
Windows 10. Used to work okay about 6 months ago. Not sure what changed

Ask almighty M$ programmers. Welcome to Windows 10 Beta Service ;)

https://lh3.googleusercontent.com/proxy/E2gGddktAS8NTx2k8JSElKMpMGaPHY1JAqDkmK9boDbqM9njJeDb2pBp4fc_HQ=w506-h291

slalom
5th December 2016, 20:25
#Deinterlace
Loadplugin("C:\RipBot264v1.19.5\Tools\AviSynth plugins\Repair\RepairSSE2.dll")
Loadplugin("C:\RipBot264v1.19.5\Tools\AviSynth plugins\RemoveGrain\RemoveGrainSSE2.dll")
Loadplugin("C:\RipBot264v1.19.5\Tools\AviSynth plugins\nnedi3\nnedi3.dll")
Loadplugin("C:\RipBot264v1.19.5\Tools\AviSynth plugins\masktools\masktools2.dll")
Loadplugin("C:\RipBot264v1.19.5\Tools\AviSynth plugins\mvtools\mvtools2.dll")
LoadCplugin("C:\RipBot264v1.19.5\Tools\AviSynth plugins\Yadif\Yadif.dll")
Import("C:\RipBot264v1.19.5\Tools\AviSynth plugins\Scripts\QTGMC.avs")
video=QTGMC(video,Preset="Medium",FPSDivisor=2)
At the last line
If I want minimum 500, how should it be?

Wishbringer
5th December 2016, 21:00
Win10 and Server 2016.
Described behavior appears on Server 2016 too:
Sharpen and Chunks and On-Button.

Viper714
5th December 2016, 21:34
[QUOTE=Atak_Snajpera;1788553]Ask almighty M$ programmers. Welcome to Windows 10 Beta Service ;)

Okay, so here is the latest.
When the encoding client windows first opens everything works (mouse wheel scroll, scroll-bar [dragging or click outside of scroll bar] ,scroll-bar arrows, ON & OFF buttons).

When I click on the Ripbot main window and go back to the encoding window only the mouse wheel scroll works. Nothing else works. Not even the abort button as byteshare & Wishbringer mentioned.

Love the picture btw!!! :D

Atak_Snajpera
5th December 2016, 21:47
When I click on the Ripbot main window and go back to the encoding window only the mouse wheel scroll works. Nothing else works. Not even the abort button as byteshare & Wishbringer mentioned.
Did the same and still works fine on my windows 7. I guess your win10 has period or something ;)

byteshare
6th December 2016, 17:06
What windows version do you use?

I've just checked on my Win7 x64 and scroll bars work during encoding as well as all buttons ON/OFF/Abort.

Windows 8.1

thezfunk
7th December 2016, 00:33
Regarding "invalid matrix parameter (RGB data only)" make sure you have AviSynth 2.6 installed. I suppose you are still on pretty old 2.5.8 version.
CRC32 error was most likely caused by incomplete download (lost connection/aborted). Do not worry about that.

Regarding audio topic I will have to check.

I had the exact same error. You are right, installing AviSynth 2.6 solved the issue.

Atak_Snajpera
7th December 2016, 20:15
Windows 8.1

Ok. I did some testing on Virtual Machine.

Windows 7 with updates -> no lock in encoding client after losing focus
Windows 8.1 without updates -> no lock in encoding client after losing focus
Windows 8.1 with installed updates -> LOCK !
Windows 10 14393 with installed updates -> LOCK !

Clearly M$ had to push some weird update to 8.1 and 10 somewhere in time.

byteshare
8th December 2016, 17:06
Windows 7 with updates -> no lock in encoding client after losing focus
Windows 8.1 without updates -> no lock in encoding client after losing focus
Windows 8.1 with installed updates -> LOCK !
Windows 10 14393 with installed updates -> LOCK !

Clearly M$ had to push some weird update to 8.1 and 10 somewhere in time.
Thank you for testing. I noticed that after the lock it looks almost like the window gets put into another window. It isn't a huge issue but it is a nuisance.

Any plans to give more queue management? Right now I've been using a turbo mouse to move items around faster.

Deepcuts
24th December 2016, 22:45
Thank you for creating this software.

I am using 10 machines connected over internet via OpenVPN and after some problems, I am happy with the speed.
Quick tip for those who might want to try connecting computers over internet via VPN:

On all clients connecting via VPN, edit C:\Windows\System32\Drivers\Etc\hosts file and add at the end:
Main_PC_IP Main_PC_NetBiosName

example:
192.168.100.15 RipBot264PC

If a client connected over VPN cannot resolve the computer name, it will flick from Idle to Encoding because the client is set to work with computer name instead of IP.

Of course, 1 Gbps will help a lot. I do not recommend using anything lower with so many computers.

Ronski
27th December 2016, 23:12
I usually use the [MAIN x.x] 8bit Progressive profile H265, could somebody explain the benefits and pitfalls (if any) of using the [MA10 x.x] 10bit progressive profile please?

I've tried Googling and can't really find anything.

Deepcuts
28th December 2016, 00:07
Could use some help.
Just finished encoding 2 whole series of about 300 episodes only to discover that my Plex server just stops playing the resulted file after about 1 minute.
I can play the file locally just fine with MPC-HC, but all files encoded with RipBot264 behave the same: they stop after ~ 1 minute when playing from a Plex server.
ffmpeg -v error -i filename.mp4 -map 0:1 -f null - 2>error.log shows no errors.
Anyone else experienced such behavior?

later edit:
I even tried copying the file to Apache htroot and access the file via Chrome and the play stopped at the same time frame. So clearly Plex is not the problem.

damia
28th December 2016, 01:18
@ Atak_Snajpera
hai.. can i ask something.. i load file and take long time to gathering information...the file just 1.20GB i try use another computer load fast...can i know what is the problem?
thank you hope you reply ASAP :)

Deepcuts
28th December 2016, 01:23
@ Atak_Snajpera
hai.. can i ask something.. i load file and take long time to gathering information...the file just 1.20GB i try use another computer load fast...can i know what is the problem?
thank you hope you reply ASAP :)

Slow hard drive most likely.

damia
28th December 2016, 02:02
Slow hard drive most likely.

ohh i see.. C: or where file hard drive locate?

Atak_Snajpera
28th December 2016, 16:24
Could use some help.
Just finished encoding 2 whole series of about 300 episodes only to discover that my Plex server just stops playing the resulted file after about 1 minute.
I can play the file locally just fine with MPC-HC, but all files encoded with RipBot264 behave the same: they stop after ~ 1 minute when playing from a Plex server.
ffmpeg -v error -i filename.mp4 -map 0:1 -f null - 2>error.log shows no errors.
Anyone else experienced such behavior?

later edit:
I even tried copying the file to Apache htroot and access the file via Chrome and the play stopped at the same time frame. So clearly Plex is not the problem.

Try this switch
http://i.cubeupload.com/VGDuBq.png

You may also try remuxing your encodes to mkv.

damia
29th December 2016, 05:07
@Atak_Snajpera
can help me to solve this problem please? :)

Deepcuts
29th December 2016, 05:38
I have tried to re-encode a file with --stitchable, but the result is the same.
Using Google Chrome to directly play the mp4 from a web server or Plex, freezes the play at ~1:00 min.
Using Internet Explorer 11, Plex will not freeze.
So I guess this must be a Chrome problem somehow.

I tried re-muxing the mp4 as mkv, but no luck. It is still freezing.

byteshare
2nd January 2017, 15:56
I usually use the [MAIN x.x] 8bit Progressive profile H265, could somebody explain the benefits and pitfalls (if any) of using the [MA10 x.x] 10bit progressive profile please?

I've tried Googling and can't really find anything.
I'm sure others will have very different opinions (also not the right forum for this), but quick differences IMO are:
8bit faster encode, slightly smaller filesize (sometimes), and higher degree of compatibility (number of devices that can play smoothly).
10bit better handling of dark scenes and banding (noticeably in CRF 20-24 (were I mostly encode)).

byteshare
2nd January 2017, 15:59
I have tried to re-encode a file with --stitchable, but the result is the same.
Using Google Chrome to directly play the mp4 from a web server or Plex, freezes the play at ~1:00 min.
Using Internet Explorer 11, Plex will not freeze.
So I guess this must be a Chrome problem somehow.

I tried re-muxing the mp4 as mkv, but no luck. It is still freezing.

Try Kodi just to test since they have similar players.

Ronski
3rd January 2017, 20:14
@byteshare Thanks very much for the explanation, much appreciated. All players I currently use can handle it, and as time goes on I expect more will, so I'll switch to using it.

klopsknoedel
4th January 2017, 12:51
@ Atak_Snajpera
hai.. can i ask something.. i load file and take long time to gathering information...the file just 1.20GB i try use another computer load fast...can i know what is the problem?
thank you hope you reply ASAP :)

@Atak_Snajpera
can help me to solve this problem please? :)

It's a common problem and can be solved easily by following these steps:
http://forum.doom9.org/showthread.php?p=1524496#post1524496

damia
5th January 2017, 11:09
It's a common problem and can be solved easily by following these steps:
http://forum.doom9.org/showthread.php?p=1524496#post1524496

i already folow the steps.. but result still same.. :(
some file take around 4-5minute...but i test same file on other pc work fast.. gathering information only take 15-20second only..

burt123
5th January 2017, 11:32
Hi Atak,
I think I may have discovered a bug when using the new noise filter MDgrain2.

If you abort a job (when using DE, haven't tried it without), and when the pop up comes up "Do you want to keep the current progress ?", and you chose "Yes"...when you come back to it, it starts from the beginning :(

Please feel free to try it, I don't think it's just my setup, as it does it on a couple of different pc's, either W8.1 or W10.

But having said that, MDgrain2 does a really good job on "noisy" files, worth the wait, as it is quite a lot slower.

Which brings me to my next comment / request.

I know I have asked you many times to add more DE servers, 10 is nice, 12 or more would be great...the more help you can get with these new filters and settings, the better.

It would be a great new feature to start 2017. Please consider :)

Happy New Year y'all.

byteshare
5th January 2017, 18:01
I think I may have discovered a bug when using the new noise filter MDgrain2.

If you abort a job (when using DE, haven't tried it without), and when the pop up comes up "Do you want to keep the current progress ?", and you chose "Yes"...when you come back to it, it starts from the beginning :(
I haven't had this problem, unless you mean the segment starts over, or do you mean the whole encode (all the chunks)?

I know I have asked you many times to add more DE servers, 10 is nice, 12 or more would be great...the more help you can get with these new filters and settings, the better.
My thought is it would be great if you have 9 servers idle they could start on the next encode, meaning once all the chunks are filled another encode would start so no server is ever idle.

slalom
5th January 2017, 20:03
I haven't had this problem, unless you mean the segment starts over, or do you mean the whole encode (all the chunks)?
Only the segment stars over, unless you edit the job

burt123
6th January 2017, 00:46
I haven't had this problem, unless you mean the segment starts over, or do you mean the whole encode (all the chunks)?


My thought is it would be great if you have 9 servers idle they could start on the next encode, meaning once all the chunks are filled another encode would start so no server is ever idle.

Well, what I have noticed every time so far, is the whole encode starts from scratch....no editing, just having aborted it.

But it's only when using the new filter.

Not too sure what you mean about the 9 idle servers...or do you mean you might be able to have multiple encodes going, on each DE server, so up to 10 jobs, not 1 job over 10 servers ?!?!?

Either way, the more DE servers, the better, especially if you have many powerful pc's.

byteshare
6th January 2017, 16:41
Well, what I have noticed every time so far, is the whole encode starts from scratch....no editing, just having aborted it.

But it's only when using the new filter.

Not too sure what you mean about the 9 idle servers...or do you mean you might be able to have multiple encodes going, on each DE server, so up to 10 jobs, not 1 job over 10 servers ?!?!?

Either way, the more DE servers, the better, especially if you have many powerful pc's.
I just tested it using MDegrain2 and MDegrain3 (manual edit) and only the chunks restart on me, not the chunks already finished. I'm testing on Windows 8.1

For the 9 idle servers I mean near the end of a job when you only have a few chunks left and servers start to go idle because there are no chunks left to encode, if those idle servers could start working on the next job that would be awesome.

burt123
7th January 2017, 00:56
I just tested it using MDegrain2 and MDegrain3 (manual edit) and only the chunks restart on me, not the chunks already finished. I'm testing on Windows 8.1

For the 9 idle servers I mean near the end of a job when you only have a few chunks left and servers start to go idle because there are no chunks left to encode, if those idle servers could start working on the next job that would be awesome.

Hi byteshare,

Yeah, on further observation, I have noticed that the problem occurs on other encodes, not just with MDegrain, so I must have a problem somewhere.

Interested in your mention of a manual edit to use MDegrain3....more info on that, please :)

Yep, I have to agree with your idea about the servers activity at the end of a job....good idea !!!

But I'd still like MORE.....

slalom
7th January 2017, 15:15
Yep, I have to agree with your idea about the servers activity at the end of a job....good idea !!!
You're talking about 3-5 minutes max of idle time. Not worth the trouble

byteshare
9th January 2017, 16:00
Hi byteshare,

Yeah, on further observation, I have noticed that the problem occurs on other encodes, not just with MDegrain, so I must have a problem somewhere.

Interested in your mention of a manual edit to use MDegrain3....more info on that, please :)

Yep, I have to agree with your idea about the servers activity at the end of a job....good idea !!!

But I'd still like MORE.....

MDegrain3 Grainy Stuff (Removes extra noise):
#Denoise
Loadplugin("YourPathHere\RipBot264v1.19.5\Tools\AviSynth plugins\mvtools\mvtools2.dll")
LoadPlugin("YourPathHere\RipBot264v1.19.5\Tools\AviSynth plugins\flash3kyuu_deband\flash3kyuu_deband.dll")
super = video.MSuper(pel=2)
bv1 = MAnalyse(super, isb = true, delta = 1, overlap=4)
fv1 = MAnalyse(super, isb = false, delta = 1, overlap=4)
bv2 = MAnalyse(super, isb = true, delta = 2, overlap=4)
fv2 = MAnalyse(super, isb = false, delta = 2, overlap=4)
bv3 = MAnalyse(super, isb = true, delta = 3, overlap=4)
fv3 = MAnalyse(super, isb = false, delta = 3, overlap=4)
video=video.MDegrain3(super,bv1,fv1,bv2,fv2,bv3,fv3,thSAD=400).f3kdb


You're talking about 3-5 minutes max of idle time. Not worth the trouble

That would depend on your encode settings/FPS, not to mention how many server you have sitting idle to multiply that by. With slow encodes that use MDegrain I can have a 60s clip take 30 or more min. so that means I can have all but 1 server idle for 30 min. just waiting for the job to end and start encoding again.

Shrekage
10th January 2017, 16:01
I have found a bug in encodingclient.exe. I have 1 server at 10.0.0.100. and after the client connects to it and the chunk starts to encode, it changes the address to 10.0.0.116. when the chunk finishes encoding, I get an exception shown in the attached PNG file

it reads "Exception EConvertError in module EncodingClient.exe at 00024122. '116:1000' is not a valid floating point value."

What do you need to debug?

Atak_Snajpera
10th January 2017, 17:42
What do you need to debug?
We can start with screenshot which does not require admin approval.

Shrekage
10th January 2017, 23:13
We can start with screenshot which does not require admin approval.

how does one do that. I don't find a way to paste screenshot into the forum

Ronski
11th January 2017, 11:11
Upload the picture to somewhere like photo bucket, Google pictures etc and post a link on here

Shrekage
11th January 2017, 16:01
https://www.amazon.com/photos/share/d1VuNQJjrpvsG4OdTXS9ycO104ZmQN404UZYsxRBe9i

Atak_Snajpera
11th January 2017, 19:52
Is there any reason why you connect to server via ip 10.0.0.100 instead of 10.0.0.116? Do you have mutiple network adapters on that remote-pc? Can you run ipconfig /all on that machine?

Shrekage
11th January 2017, 21:24
because 100 is it's IP address...


C:\Users\Administrator>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : W764-XPS2710a
Primary Dns Suffix . . . . . . . : xxxx.xxx.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : xxxx.xxx.com

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Dell Wireless 1703 802.11b|g|n (2.4GHz)
Physical Address. . . . . . . . . : C0-18-85-4E-73-0D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Local Area Connection* 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : 12-18-85-4E-73-0D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Local Area Connection* 3:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Hosted Network Virtual Adapter
Physical Address. . . . . . . . . : 52-18-85-4E-73-0D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Qualcomm Atheros AR8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)
Physical Address. . . . . . . . . : 00-21-70-68-72-04
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2605:6000:101b::xxxx(Preferred)
Temporary IPv6 Address. . . . . . : 2605:6000:101b::xxxx(Preferred)
Link-local IPv6 Address . . . . . : fe80::4d00:fe8:5695:94d3%4(Preferred)
IPv4 Address. . . . . . . . . . . : 10.0.0.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2017 9:12:53 AM
Lease Expires . . . . . . . . . . : Thursday, January 12, 2017 9:12:52 AM
Default Gateway . . . . . . . . . : fe80::26a4:3cff:fe05:1577%4
10.0.0.1
DHCP Server . . . . . . . . . . . : 10.0.0.1
DHCPv6 IAID . . . . . . . . . . . : 285221232
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-BE-6A-33-00-21-70-68-72-04
DNS Servers . . . . . . . . . . . : 10.0.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : C0-18-85-4E-73-0E
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{4C726AEE-FBEA-496D-9D9C-08B3B23B63C4}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76::xxxx(Preferred)
Link-local IPv6 Address . . . . . : fe80::3822:3e33:bdbb:7422%11(Preferred)
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 469762048
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-BE-6A-33-00-21-70-68-72-04
NetBIOS over Tcpip. . . . . . . . : Disabled

C:\Users\Administrator>

Shrekage
11th January 2017, 21:38
10.0.0.116 is assigned to a samsung device on my network, not the 10.0.0.100 PC

byteshare
11th January 2017, 21:43
What is the shortest segment length you can get away with without losing compression and/or quality for CRF? For 2pass? Right now the default is 60s.
I mostly use CRF but sometimes I use 2pass.

In order to reduce some of my server idle time I was hoping to reduce the segment size.

Atak_Snajpera
12th January 2017, 13:57
@Shrekage
Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Qualcomm Atheros AR8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)
Physical Address. . . . . . . . . : 00-21-70-68-72-04
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2605:6000:101b::xxxx(Preferred)
Temporary IPv6 Address. . . . . . : 2605:6000:101b::xxxx(Preferred)
Link-local IPv6 Address . . . . . : fe80::4d00:fe8:5695:94d3%4(Preferred)
IPv4 Address. . . . . . . . . . . : 10.0.0.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2017 9:12:53 AM
Lease Expires . . . . . . . . . . : Thursday, January 12, 2017 9:12:52 AM
Default Gateway . . . . . . . . . : fe80::26a4:3cff:fe05:1577%4
10.0.0.1
DHCP Server . . . . . . . . . . . : 10.0.0.1
DHCPv6 IAID . . . . . . . . . . . : 285221232
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-BE-6A-33-00-21-70-68-72-04
DNS Servers . . . . . . . . . . . : 10.0.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Is this connection on top of this list?

http://i.cubeupload.com/72F9Fj.png

Shrekage
12th January 2017, 17:11
Yes
https://www.amazon.com/photos/share/F3MZfvSoGZEkA3GJ8uqNGVudlArSMJmsyC1oD0vp7r1

Atak_Snajpera
12th January 2017, 19:43
Run this http://www.mediafire.com/file/8kyq2bt9859nyey/DetectIP.exe on that remote-PC and show me what ip it detects.

Shrekage
12th January 2017, 20:10
10.0.0.100

https://www.amazon.com/photos/share/SQgVRJ4nYPZ7whbussUBYMGCaLb3aWS3KHqqEI1SElG

Atak_Snajpera
12th January 2017, 20:23
Ok so new code works better.

Atak_Snajpera
14th January 2017, 17:59
@Shrekage
This should solve your problems with wrong ip
http://www.mediafire.com/file/9ioix3464i3fugp/updated_client_and_server.7z

Tazlord
16th January 2017, 08:00
Has anyone else noticed issues with multi-playlist titles not showing the correct playlist in the "Select Streams" "Playlist" drop-down? So far I've run into 2 titles that have the multi-playlist protection where the correct playlist wouldn't show up in the drop-down. I verified the correct playlist on both titles using the Process Monitor method and also verified the playlist via BDInfo. However, when trying to select the proper playlist in RipBot, the correct one is nowhere to be found. I figure since the BD Structure is established from the eac3to executable, I'm going to assume it's probably a problem with that application. I just wanted to see if anyone else is having this same problem?

Atak, in case you're monitoring this. I've attached a link to the BD structure of one of the titles so you can see for yourself. The correct playlist for this title is 541 but it doesn't show up in eac3to's output.
job8.zip https://file.io/EI44gj (https://file.io/EI44gj)

Titles Tested:
Deep Water Horizon - 541.mpls
Nerve - 456.mpls

dracore
16th January 2017, 19:33
Will x265 encoding with gpu be supported at all, i have a gtx 1060 and was just wondering if this feature could be added ... thank you

smuperman
17th January 2017, 09:39
Hi @ Atak_Snajpera

Is it possible to add some AAC Profiles besides constant quality or better to enter the (VBR) Quality Settings freely?

The "quality=0.X" Setting.

byteshare
19th January 2017, 16:07
Hi @ Atak_Snajpera

Is it possible to add some AAC Profiles besides constant quality or better to enter the (VBR) Quality Settings freely?

The "quality=0.X" Setting.

The wait for more sound options could be a long one. I'd recommend if you're not already using a 3rd party app to process the sound and then mux it back in yourself.

jlpsvk
1st February 2017, 20:44
@Atak_Snajpera

Hi. First of all, thanks for the RipBot distributed encoding...using 32 cores on my LAN I am able to get 30fps with HEVC slow settings. :)

Hust a few suggestions.

- Why you still require ffdshow, which are old and no longer maintained? What about switch to LAV Filters?
- option to output filename preset... for example if file is INPUT.MKV than after selecting it, output will automatically be named INPUT_HEVC.mkv or whatever I set
- option not to demux audio...spare time, when I want to mux external audio later
- option to set DEFAULT, FORCED signs to audio/subtitle tracks, and codepage to SRT subtitle tracks (for the muxing part)

And one question...what aboout audio delays? If the source file's audio has some delay, will it be maintained after encoding and muxing?

byteshare
6th February 2017, 18:50
There is no quality loss in cq because in this mode bitrate is adjusted on fly. Those posts have nothing to do with cq mode.
If the chunk size doesn't matter for DE with CQ mode than why do you force 60s chunks?
Would that also mean that "BDO strength" doesn't have an affect when doing DE with CQ?

byteshare
8th February 2017, 18:25
When encoding on 1 machine with 2-4 encoding clients on the 1 machine at the end of the encode the server window (shows the status of each chunk and such) stays open and shows my encoding clients as idle. If I close the server window the completed chunks mux with the audio as desired and I get the file I want.
It doesn't happen with every file. What logs should I provide on files this does happen with?
Windows 7 SP1
RipBot 1.19.5

Atak_Snajpera
8th February 2017, 19:37
I think simple screenshot describing this issue should be enough for start. It is always easier for me to understand problem if I can see what you see.

It doesn't happen with every file.
Does this happen with specific video file or it is just pure random?

burt123
9th February 2017, 07:53
When encoding on 1 machine with 2-4 encoding clients on the 1 machine at the end of the encode the server window (shows the status of each chunk and such) stays open and shows my encoding clients as idle. If I close the server window the completed chunks mux with the audio as desired and I get the file I want.
It doesn't happen with every file. What logs should I provide on files this does happen with?
Windows 7 SP1
RipBot 1.19.5

I'm pretty sure I get that problem randomly, as well.....

Windows 10

slalom
9th February 2017, 10:51
Same here, some times

byteshare
9th February 2017, 16:27
I think simple screenshot describing this issue should be enough for start. It is always easier for me to understand problem if I can see what you see.


Does this happen with specific video file or it is just pure random?

It seems to be random because if I retry the encode it usually doesn't happen, which is what I was doing the first few times, but now I know I need to just close the main server window.
I had it happen not long ago, but didn't take a screen capture; I'll take a screen capture next time.
The log for the encode is this, Main:
C:\>"C:\Users\[User]\Desktop\RipBot264v1.19.5\EncodingClient.exe" "C:\Temp\RipBot264temp\job73\job73_EncodingClient.meta"

C:\>"C:\Users\[User]\Desktop\RipBot264v1.19.5\tools\mkvtoolnix\mkvmerge.exe" -o "C:\A\Batman Beyond s01e01 rebirth (p 1) (DVDRemux).mkv" --compression 0:none --title "Batman Beyond s01e01 rebirth (p 1) (DVDRemux)" --default-duration 0:24.27fps "C:\Temp\RipBot264temp\video.265" --compression 0:none --language 0:und --aac-is-sbr 0:0 "C:\Temp\RipBot264temp\job73\Encoded_Audio_1.aac"
mkvmerge v9.8.0 ('Kuglblids') 32bit
'C:\Temp\RipBot264temp\video.265': Using the demultiplexer for the format 'HEVC/h.265'.
'C:\Temp\RipBot264temp\job73\Encoded_Audio_1.aac': Using the demultiplexer for the format 'AAC'.
'C:\Temp\RipBot264temp\video.265' track 0: Using the output module for the format 'HEVC/h.265 (unframed)'.
'C:\Temp\RipBot264temp\job73\Encoded_Audio_1.aac' track 0: Using the output module for the format 'AAC'.
The file 'C:\A\Batman Beyond s01e01 rebirth (p 1) (DVDRemux).mkv' has been opened for writing.
'C:\Temp\RipBot264temp\video.265' track 0: Extracted the aspect ratio information from the HEVC video data and set the display dimensions to 716/536.

The cue entries (the index) are being written...
Multiplexing took 2 seconds.
-------------------------
Distributed Encoding:
Node Address : 10.10.10.5:1000
Encoded Chunks : 6 of 22 (27%)
Encoded Frames : 8631
Encoding Speed : 4 fps
Node Work Time : 00:33:57
-----------------------------------
Node Address : 10.10.10.5:2000
Encoded Chunks : 5 of 22 (23%)
Encoded Frames : 7210
Encoding Speed : 4 fps
Node Work Time : 00:30:01
-----------------------------------
Node Address : 10.10.10.5:3000
Encoded Chunks : 6 of 22 (27%)
Encoded Frames : 8991
Encoding Speed : 4 fps
Node Work Time : 00:35:07
-----------------------------------
Node Address : 10.10.10.5:4000
Encoded Chunks : 5 of 22 (23%)
Encoded Frames : 7207
Encoding Speed : 4 fps
Node Work Time : 00:30:03
-----------------------------------
From the main RipBot window said: "Total time 04h:00m:24s"
in this case seems to have been stuck for about 3.5 hours.

Atak_Snajpera
9th February 2017, 19:18
I had it happen not long ago, but didn't take a screen capture; I'll take a screen capture next time.
Make sure that encoding client and all encoding servers are fully visible on your screenshot.

byteshare
9th February 2017, 19:25
Here is a screen cap of the issue:
http://imgur.com/a/opFts
I might have been wrong, looks like the encoding clients do turn off

Atak_Snajpera
9th February 2017, 19:27
What has happened to those buttons? Did encoding client combine chunks?

Update:
I reckon that application is unable to completely close main form after work. It looks like it hung after form1.close command. Weird...

byteshare
9th February 2017, 19:58
What has happened to those buttons? Did encoding client combine chunks?

Update:
I reckon that application is unable to completely close main form after work. It looks like it hung after form1.close command. Weird...
It combines the chunks in the main window when I close the server window.

byteshare
10th February 2017, 17:23
I can confirm since switching over to the full/official 19.5 (not just the update from 19.4 to 19.5) something has changed with the window behavior in Windows 7. I haven't tested on Windows 8. I know you applied some fixes for loosing window control that I know I personally had with the server window in Windows 8.
I used to use a program called Turbo Mouse (clicks for you really fast) so I could move things around the queue with less work and faster, but not the program no longer works in the RipBot window, but still works in other applications normally.
I wonder if this is related to the issue with the server window getting stuck open and not auto muxing a video on complete when in DE mode?

Atak_Snajpera
10th February 2017, 21:40
Tomorrow I will post improved EncodingClient for testing. It should fix all those odd behaviours (stalls and so on). I've just noticed that I had very ugly code here and there remembering 1.17.x times.

byteshare
10th February 2017, 22:20
Tomorrow I will post improved EncodingClient for testing. It should fix all those odd behaviours (stalls and so on). I've just noticed that I had very ugly code here and there remembering 1.17.x times.

Awesome, thank you very much in advance.

Atak_Snajpera
11th February 2017, 15:40
byteshare check this http://www.mediafire.com/file/zat5jd4as3wa1jl/EncodingClient.exe

byteshare
11th February 2017, 16:47
byteshare check this http://www.mediafire.com/file/zat5jd4as3wa1jl/EncodingClient.exe

Testing now, might be a while to confirm.
I'll let you know how it goes :D

Atak_Snajpera
11th February 2017, 18:49
Take your time. I can wait few days...

byteshare
12th February 2017, 03:48
Hasn't been stalling like before, but I did get an unusual crash (went through 13 encodes no problem rather than the 1-5 before a stall):
Problem signature:
Problem Event Name: APPCRASH
Application Name: EncodingClient.exe
Application Version: 1.7.0.0
Application Timestamp: 2a425e19
Fault Module Name: StackHash_75b5
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: 00000000
Exception Offset: 00000000
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 75b5
Additional Information 2: 75b52eca4d1a1e3be01b2a7f70df718c
Additional Information 3: 47c1
Additional Information 4: 47c1690b41f4145092bfe6c76f595c85

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

This was after an encode was finishing and needed to be mux'd. I closed the error and the video was mux'd correctly and RipBot went on to the next encode (opened the EncodingClient for the next video).

Doesn't show much but the job log file:
C:\>"C:\Users\Money\Desktop\RipBot264v1.19.5\EncodingClient.exe" "C:\Temp\RipBot264temp\job125\job125_EncodingClient.meta"

C:\>"C:\\RipBot264v1.19.5\tools\mkvtoolnix\mkvmerge.exe" -o "C:\Stephen Colbert 2017 01 13 Cuba Gooding Jr 720p HDTV x264-FLEET.mkv" --compression 0:none --title "Stephen Colbert 2017 01 13 Cuba Gooding Jr 720p HDTV x264-FLEET" --default-duration 0:60000/1001fps "C:\Temp\RipBot264temp\video.265"
mkvmerge v9.8.0 ('Kuglblids') 32bit
'C:\Temp\RipBot264temp\video.265': Using the demultiplexer for the format 'HEVC/h.265'.
'C:\Temp\RipBot264temp\video.265' track 0: Using the output module for the format 'HEVC/h.265 (unframed)'.
The file 'C:\Stephen Colbert 2017 01 13 Cuba Gooding Jr 720p HDTV x264-FLEET.mkv' has been opened for writing.
'C:\Temp\RipBot264temp\video.265' track 0: Extracted the aspect ratio information from the HEVC video data and set the display dimensions to 1280/720.

The cue entries (the index) are being written...
Multiplexing took 6 seconds.
-------------------------

Elapsed Time: 02h:21m:23s

NeFReT
12th February 2017, 12:30
Could you give a video narration for Ripbot264 distributed encoding?

I could not connect two computers with WiFi, would you tell me how to switch between two computers ?

Translated by Google

tkwou
12th February 2017, 22:20
Hi Atak_Snajpera, I've noticed a problem with the last two blu-rays I've tried to recode. I'm using 1.19.5 and distributed encoding with a total of 4 computers. For some reason one of the chunks is much smaller and at a much lower bit rate than all the rest. If you look at my attachments, block 1.264 is much smaller than all the other following pieces despite it's similar 1 minute duration. The video is highly pixellated and macroblocked compared to all the following pieces which encoded properly. This occurred with another movie but it was more towards the end of the movie. Again it was only one block with all the rest being normal. Please let me know if there is any other info you require. Thanks.

tkwou
13th February 2017, 08:38
Sorry I guess I should include that I'm re-encoding Blu ray to Profile AVC High 4.0 at an average bit rate of 20000 on a 2-Pass.

Atak_Snajpera
13th February 2017, 10:35
increase chunk size from default 60s to 300s or even 600s.

tkwou
13th February 2017, 20:49
Thanks I'll give that a try. What about the BDO strength setting. Should I leave it at 2? Also, as I've asked before, how do I demux a TrueHD soundtrack without it automatically converting to Flac? Thanks.

byteshare
14th February 2017, 02:30
Thanks I'll give that a try. What about the BDO strength setting. Should I leave it at 2? Also, as I've asked before, how do I demux a TrueHD soundtrack without it automatically converting to Flac? Thanks.

You could try BDO 1 or 0:
http://forum.doom9.org/showthread.php?p=1729404#post1729404

As for Demuxing TrueHD soundtrack, I'd manually do this with MKVToolNix

tkwou
14th February 2017, 07:00
Thanks byteshare, it's just that the TrueHD track is already in the Blu-ray .mkv so that I would have to remove the track first by creating a new .mkv file before using Ripbot264. Otherwise it will just demux the TrueHD track and start converting it to Flac which wastes a lot of time. Then when Ripbot264 is finished I would need to remux the .mkv again to add the TrueHD soundtrack back.

Ronski
14th February 2017, 11:15
I also use MKVToolnix to strip out the video only, then use Ripbot264 to process that, then re mux again with MKVToolnix, leaving out the original video stream and mux in the new stream. It does take extra time, but I don't do many so not a problem for me.

It would be ideal if ripbot can be told to just process the video and leave everything else as it is.

byteshare
14th February 2017, 19:07
Thanks byteshare, it's just that the TrueHD track is already in the Blu-ray .mkv so that I would have to remove the track first by creating a new .mkv file before using Ripbot264. Otherwise it will just demux the TrueHD track and start converting it to Flac which wastes a lot of time. Then when Ripbot264 is finished I would need to remux the .mkv again to add the TrueHD soundtrack back.

If the copy audio isn't working for you, than you'll have to do it manually, however...I recommend using a batch file to do these things. I can help with that if you need it.
I'd use these for now (in .bat form) for stripping out audio (going from audio/video to just video:
for %%a in (*.mkv) do "C:\Program Files\MKVToolNix\mkvmerge.exe" -o "..\output\%%a" -A "%%a"
Just audio (audio/video to just audio):
for %%a in (*.mkv) do "C:\Program Files\MKVToolNix\mkvmerge.exe" -o "..\output\%%a" -D "%%a"

tkwou
14th February 2017, 22:53
Thanks for your advice but I already know how to do it. I was just hoping there was a simple way so I wouldn't have to. I don't understand why True-HD is still singled out to be converted to Flac when other HD audio tracks are left alone.

byteshare
15th February 2017, 01:17
Thanks for your advice but I already know how to do it. I was just hoping there was a simple way so I wouldn't have to. I don't understand why True-HD is still singled out to be converted to Flac when other HD audio tracks are left alone.

I'm not sure either. RipBot could use a little TLC when it comes to audio but the program is great overall so what can you do but wait for updates :)
I know I'd like to see a "none" option for audio in batch mode.

Atak_Snajpera
15th February 2017, 19:11
http://www.mediafire.com/file/zat5jd4as3wa1jl/EncodingClient.exe

This version has improved BDO algorithm.
First change is range. It now accepts only values between 0 and 1. (if value is larger then 1 is used)
There is also a new safety limit how much bitrate can be reduced for low complexity chunks (credits and so on). In old version it was 100kbps. Now the limit is 25% of nominal bitrate. In example below you can see that bitrate does not drop below 250kbps in credit section.

https://i.imgsafe.org/4971fcf592.png

byteshare
15th February 2017, 20:21
http://www.mediafire.com/file/zat5jd4as3wa1jl/EncodingClient.exe

This version has improved BDO algorithm.
First change is range. It now accepts only values between 0 and 1. (if value is larger then 1 is used)
There is also a new safety limit how much bitrate can be reduced for low complexity chunks (credits and so on). In old version it was 100kbps. Now the limit is 25% of nominal bitrate. In example below you can see that bitrate does not drop below 250kbps in credit section.
This only affects 2-pass and not CQ mode, correct?

The new 2.3 x265 has a few other optimizations for 2-pass mode.
http://x265.readthedocs.io/en/stable/releasenotes.html

Atak_Snajpera
15th February 2017, 22:29
yes. Only 2-pass needs this bitrate adjustment for each chunk.

NeFReT
16th February 2017, 11:57
Could you give a video narration for Ripbot264 distributed encoding?

I could not connect two computers with WiFi, would you tell me how to switch between two computers ?

Translated by Google

Atak_Snajpera
16th February 2017, 16:56
I could not connect two computers with WiFi,
Check firewall

byteshare
16th February 2017, 17:12
Take your time. I can wait few days...

Other than that one Crash I posted I haven't had any problems with the encoding client. Thank you!

Atak_Snajpera
16th February 2017, 19:04
Other than that one Crash I posted I haven't had any problems with the encoding client. Thank you!

I've also experienced similar crash on my pc so definitely I must debug this. What is really annoying that It is so rare :(

ador250
17th February 2017, 13:35
why still uses ffdshow? there is no further development & update since 2014..Lavfilters should be a better option..I bring this issue because I had nvidia gpu and want hardware decoding while encoding..want my cpu to give all it's juice to encoding..ffdshow only has intel quicksync no cuvid/cuda support but Lavfilters has all of this..pls consider this option.

Atak_Snajpera
17th February 2017, 14:10
why still uses ffdshow? there is no further development & update since 2014..Lavfilters should be a better option..I bring this issue because I had nvidia gpu and want hardware decoding while encoding..want my cpu to give all it's juice to encoding..ffdshow only has intel quicksync no cuvid/cuda support but Lavfilters has all of this..pls consider this option.

Do you realize that during conversion encoding process (x264/x265) is a true bottleneck?

http://i.cubeupload.com/9Vdnim.png

Hardware decoding won't reduce encoding time because CPU spends more than 90% of cycles on encoding.

skylinekiller
20th February 2017, 11:01
I would like to upgrade my method of ripping tv DVD box sets. Don't laugh, but my current method is:
1) rip each video title with DVDFAB VOB passthroguh
2) Use MeGUI and use FileIndexer to crop, de-interlace (if required) and add my Decomb to the .avs script
3) Use foobar to make my .AAC sound file
4) Use VDub with misc filters and a two pass to make .avi
5) extract H264 and remux with Yamb
6) Final tv series of .mp4

Does rip bot do this in less steps? If so, does it accurately crop and de-interlace as required?

Atak_Snajpera
20th February 2017, 13:36
yes...

NeFReT
20th February 2017, 20:23
access violation at address 004c6280 in module encodingserver.exe read of address 00000098

Socet Error # 10061

Connetion refused

I get an error. Can you make a detailed narration? In Turkish. Will tell

skylinekiller
20th February 2017, 21:58
Is there a RipBot guide or tutorial that can get me going in the right direction to accomplish this? I only have used it to batch .mkv's into .mp4s. At most the only advanced feature is changing it from 1080p to 720p.

I would like to upgrade my method of ripping tv DVD box sets. Don't laugh, but my current method is:
1) rip each video title with DVDFAB VOB passthroguh
2) Use MeGUI and use FileIndexer to crop, de-interlace (if required) and add my Decomb to the .avs script
3) Use foobar to make my .AAC sound file
4) Use VDub with misc filters and a two pass to make .avi
5) extract H264 and remux with Yamb
6) Final tv series of .mp4

Does rip bot do this in less steps? If so, does it accurately crop and de-interlace as required?

skylinekiller
21st February 2017, 14:11
By the way, in RipBot, is 22 CRF an acceptable setting for a DVD TV series rip? I'ts an older TV show, I Dream of Jeannie. So not a lot of fast motion scenes. I have been doing 2 pass 2048KBS on all my TV shows, regardless of BD or DVD, new or old. From what I am reading, I am overkilling the DVD with 2048 kbs on old DVD TV Shows.

Atak_Snajpera
21st February 2017, 14:26
By the way, in RipBot, is 22 CRF an acceptable setting for a DVD TV series rip?
You have to decide. Do some test encodes and see for yourself.

byteshare
24th February 2017, 22:50
@Atak_Snajpera I know it would be a lot of work, and I'm not trying to pressure, but have you looked at using newer mvtools? https://github.com/pinterf/mvtools/releases/tag/2.7.9.22
It includes some speedup improvements for MDegrain1-6. I tried using it with RipBot and it errored out so I think maybe it has something to do with another dependency?
If it can't/won't ever happen no worries, I use the program a lot as is.
HandBrake doesn't even have a denoise as good as mdegrain in RipBot :)

brumsky
26th February 2017, 16:11
Atak_Snajpera, would it be possible to add a some CLI support to ripbot? I'd like to be able to add encodes to the list.

Something like the follow command

ripbot source dest x265 audio1 5.1 ac3

It would ideally use the default HEVC profile. I'm hoping to automate this with a powershell script I have been using.

Thanks love Ripbot264!!

Atak_Snajpera
26th February 2017, 18:44
@Atak_Snajpera I know it would be a lot of work, and I'm not trying to pressure, but have you looked at using newer mvtools? https://github.com/pinterf/mvtools/releases/tag/2.7.9.22
It includes some speedup improvements for MDegrain1-6. I tried using it with RipBot and it errored out so I think maybe it has something to do with another dependency?
If it can't/won't ever happen no worries, I use the program a lot as is.
HandBrake doesn't even have a denoise as good as mdegrain in RipBot :)

Indeed latest version is 23% faster than old one on my SandyBridge CPU.
Just copy mvtools2.dll from x86 folder and it will work.

@brumsky
I will think about it.

byteshare
28th February 2017, 04:38
Maybe I'm doing it wrong?
I downloaded: https://github.com/pinterf/mvtools/releases/tag/2.7.14.22
copied the mvtools2.dll from the x86 folder in the .7z to my C:\RiptBot\Tools\AviSynth plugins\mvtools\ folder (copied the one in their to somewhere else and then over write the one there.

When I try to preview:
LoadPlugin: unable to load "C:\RiptBot\Tools\AviSynth plugins\mvtools\mvtools2.dll", error=0xc1
(C:\Temp\RiptBot264temp\job384_preview.avs, line 33)

Go ahead and try to encode anyways, and during the "Please Wait...Preparing chunks..." I get:
Application error: Exception EFOpenError in module EncodingClient.exe at 0002411A.
Cannot open file "C:\Temp\RiptBot264temp\job384\info.txt". The system cannot find the file specified.

Tried this for giggles with the x64 one too.
This is my Denoise code (default):
#Denoise
Loadplugin("C:\RipBot\Tools\AviSynth plugins\mvtools\mvtools2.dll")
super=MSuper(video,pel=2)
fv1=MAnalyse(super,isb=false,delta=1,overlap=4)
bv1=MAnalyse(super,isb=true,delta=1,overlap=4)
fv2=MAnalyse(super,isb=false,delta=2,overlap=4)
bv2=MAnalyse(super,isb=true,delta=2,overlap=4)
video=MDegrain2(video,super,bv1,fv1,bv2,fv2,thSAD=400)

Copy the original mvtools2.dll back in and no problems. If it makes a difference I'm on Windows 7 SP1 with a Haswell microarchitecture (4th generation).

Atak_Snajpera
28th February 2017, 13:23
@Byteshare
https://forum.doom9.org/showthread.php?p=1796749#post1796749

byteshare
28th February 2017, 21:48
@Byteshare
https://forum.doom9.org/showthread.php?p=1796749#post1796749

Thank you. Sorry I'm so daft sometimes. Just had to install:
Visual C++ Redistributable for Visual Studio 2015 x86
Visual C++ Redistributable for Visual Studio 2015 x64
Which I had done on my other computers but not the issue one...had been a while since I had to do that so I forgot :(
:thanks:

slalom
1st March 2017, 18:16
@Atak
for a few days now, when I search for a cover, I get a list with names and covers, but the first column with the year is empty

Atak_Snajpera
1st March 2017, 18:51
They have once again changed something. I will take a look tomorrow.

slalom
3rd March 2017, 18:20
They have once again changed something. I will take a look tomorrow.
Fixed! the best support! :thanks:

soneca
3rd March 2017, 23:05
In this latest update mvtools has been updated to version 2.7.9.22.
Atak, why did you choose this version instead of the last version, 2.7.14.2?

jonah
5th March 2017, 10:29
Having an issue here with DE that I'm sure is particularly simple.

Got an encode going on the main PC. Two other pc's on the LAN- one is helping with the encode, but the other one just sits there flicking between "Idle" and "Encoding". Over and over and it's infuriating.

It's a clean install. Any ideas as to the issue?

Atak_Snajpera
5th March 2017, 13:37
Try to capture error message in EncodingServer app. (screenshot)

burt123
6th March 2017, 00:17
Having an issue here with DE that I'm sure is particularly simple.

Got an encode going on the main PC. Two other pc's on the LAN- one is helping with the encode, but the other one just sits there flicking between "Idle" and "Encoding". Over and over and it's infuriating.

It's a clean install. Any ideas as to the issue?

I had a similar thing happen to me the other day......check that you are using the same Windows log in password on EVERY pc.

Worked for me....

Ronski
6th March 2017, 11:17
I had all my servers doing that yesterday, then I noticed it was trying to encode one that had already been done. Don't know if I'd inadvertently ticked the check box, but the servers were complaining the file was missing which it would be as I'd deleted it. But surely the main program should simply skip it if the files missing rather than trying to encode it?

I'm sure I've mentioned this before.

brumsky
6th March 2017, 18:29
Indeed latest version is 23% faster than old one on my SandyBridge CPU.
Just copy mvtools2.dll from x86 folder and it will work.

@brumsky
I will think about it.

Thank you! Just a very simple way to add encodes to the list would be perfect!

On another note, I've been getting errors with some videos when attempting to do the autocrop feature.

I get this for avs2avi.exe.

Problem signature:
Problem Event Name: APPCRASH
Application Name: avs2avi.exe
Application Version: 0.0.0.0
Application Timestamp: 40eb0522
Fault Module Name: msvcrt.dll
Fault Module Version: 7.0.9600.17415
Fault Module Timestamp: 54504b2e
Exception Code: c0000005
Exception Offset: 0000c24e
OS Version: 6.3.9600.2.0.0.400.8
Locale ID: 1033
Additional Information 1: 5861
Additional Information 2: 5861822e1919d7c014bbb064c64908b2
Additional Information 3: 6ee2
Additional Information 4: 6ee2432e64e99bdcea5e4be767a3b1a2

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=280262

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


along with this error, which makes sense as the auto crop fails.

http://i.imgur.com/tv1NiNb.jpg

Thanks again!

byteshare
6th March 2017, 20:21
In this latest update mvtools has been updated to version 2.7.9.22.
Atak, why did you choose this version instead of the last version, 2.7.14.2?
I manually updated to 2.7.14.2 and having no issues with this version.

http://i.imgur.com/tv1NiNb.jpg
Do you have:
Visual C++ Redistributable for Visual Studio 2015 x86
Visual C++ Redistributable for Visual Studio 2015 x64
Installed? (Some say just x86 is enough) If not try that. I've had issues like that before.

brumsky
7th March 2017, 16:30
Do you have:
Visual C++ Redistributable for Visual Studio 2015 x86
Visual C++ Redistributable for Visual Studio 2015 x64
Installed? (Some say just x86 is enough) If not try that. I've had issues like that before.

Yeah I have both installed.
x86 14.0.23918
x64 14.0.24215

it doesn't happen on everything, I have found a pattern either...

byteshare
7th March 2017, 17:05
Yeah I have both installed.
x86 14.0.23918
x64 14.0.24215

it doesn't happen on everything, I have found a pattern either...
I'm on:
x86: 14.0.23.026.0
x64: 14.0.23.026.0
Those are the versions you should be on if you install from: https://www.microsoft.com/en-us/download/details.aspx?id=48145
Unless you did the update: Microsoft Visual C++ 2015 Redistributable Update 3 https://www.microsoft.com/en-us/download/details.aspx?id=53587
If it is just some files and not other than find a file that is affected and post the media info to see if maybe there is something else I/we can see about the video.

brumsky
7th March 2017, 23:27
I'm on:
x86: 14.0.23.026.0
x64: 14.0.23.026.0
Those are the versions you should be on if you install from: https://www.microsoft.com/en-us/download/details.aspx?id=48145
Unless you did the update: Microsoft Visual C++ 2015 Redistributable Update 3 https://www.microsoft.com/en-us/download/details.aspx?id=53587
If it is just some files and not other than find a file that is affected and post the media info to see if maybe there is something else I/we can see about the video.

Ok I'll dig one up. Thanks.

tkwou
10th March 2017, 18:58
Hi Atak_Snajpera, I opened Ripbot264 today and it took an update. Now distributed encoding is down. It remains checked but encoding client doesn't open when you click START.

tkwou
10th March 2017, 19:59
Sorry jumped the gun. A couple of restarts and it's working again.

Atak_Snajpera
15th March 2017, 18:59
New auto crop method beta test.

Main features
-Slightly faster (1.5x-2x faster)
-more accurate (less chance for over cropped frame)

http://www.mediafire.com/file/d73d7kkwkor7100/Ripbot_new_autocrop_algo.7z

soneca
16th March 2017, 20:19
On my pc it was about 30% faster.
Wanted to test with a dark film, I remember the autocrop wrongly cut the movie Underworld, unfortunately I no longer have this BD with me.

Atak_Snajpera
17th March 2017, 15:06
The speed up will bigger if you have 16 Thread CPU (for example Ryzen 7). Realistically it is around 50%.

soneca
18th March 2017, 02:29
Does this greater accuracy also occur in dark films? Usually the most problematic for AutoCrop.

Atak_Snajpera
18th March 2017, 16:27
I've tested with Underworld (2003) and borders where correctly detected.