LunaMoon
24th January 2007, 06:31
Hi again, everyone.
Trying to back up my DVD movies again, using DVD Shrink, DVD Decrypter and RipIt4Me, to no avail, I keep getting the same error message during the burning process. I notice when the burning process starts, it takes longer than usual to write the lead-in, then it gets to 85% completed and I get the error message and the burn fails.
I bought the burner back to the place of purchase, they tested it and said there was nothing wrong with it. It's an LG DVDRAM burner. The discs I'm using, I've used before and never had any problem with them. I'm not doing anything different than I usually do, I can't think of anything that would cause the error. So I'm thinking it's a software problem, but I have no idea where to start looking for a solution. Can anyone guide me in the right direction please? I'll put up the burn log too, not sure if there's anything in there that'll help. Thanks in advance :)
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 9:49:52 PM
Nero API version: 6.3.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 1 - 6.3.0.0
Adapter driver: <IdeChnDr> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N IdeChnDr Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H10N E: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 39845888 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 247MB (253424kB)
Free physical memory: 70MB (72040kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.1.2007
NeroAPI
1:52:49 PM #1 Phase 112 File APIProgress.cpp, Line 250
DVD-Video files reallocation started
1:52:50 PM #2 Phase 114 File APIProgress.cpp, Line 250
DVD-Video files reallocation completed (no file modified)
1:52:50 PM #3 Phase 111 File APIProgress.cpp, Line 250
DVD-Video files sorted
1:53:02 PM #4 Text 0 File Reader.cpp, Line 118
Reader running
1:53:02 PM #5 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-H10N running
1:53:02 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
1:53:03 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
1:53:03 PM #8 Text 0 File Burncd.cpp, Line 3094
Turn on Disc-At-Once, using DVD media
1:53:04 PM #9 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2286111 (508:01.36)
1:53:04 PM #10 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE
1:53:04 PM #11 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
1:53:04 PM #12 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:53:04 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HL-DT-ST DVDRAM GSA-H10N ]
--------------------------------------------------------------
1:53:04 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41
1:53:05 PM #15 Phase 24 File APIProgress.cpp, Line 250
Caching of files started
1:53:05 PM #16 Text 0 File Burncd.cpp, Line 4061
Cache writing successful.
1:53:05 PM #17 Phase 25 File APIProgress.cpp, Line 250
Caching of files completed
1:53:05 PM #18 Phase 36 File APIProgress.cpp, Line 250
Burn process started at 8x (11,080 KB/s)
1:53:05 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:53:05 PM #20 Text 0 File DVDR.cpp, Line 1424
Recording mode: Sequential Recording Mode
1:53:05 PM #21 Text 0 File Mmc.cpp, Line 19397
Set BUFE: supported -> ON
1:53:05 PM #22 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes
1:53:05 PM #23 Text 0 File Cdrdrv.cpp, Line 7912
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:55:02 PM #24 Text 0 File Cdrdrv.cpp, Line 1276
13:55:02.906 - HL-DT-ST DVDRAM GSA-H10N\H1 T1 : Queue again later
2:03:18 PM #25 SCSI -1039 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x01020000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x1D 0x99 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x34 0x04 0x0C 0x09 0x01
2:03:18 PM #26 CDR -1039 File Writer.cpp, Line 301
Focus or tracking error
2:03:18 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
2:03:18 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
2:03:18 PM #29 Text 0 File DVDR.cpp, Line 1743
EndDAO: Last written address was 1939935
2:03:20 PM #30 Phase 38 File APIProgress.cpp, Line 250
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/20/2006 5:16:24 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/17/2006 4:23:54 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Trying to back up my DVD movies again, using DVD Shrink, DVD Decrypter and RipIt4Me, to no avail, I keep getting the same error message during the burning process. I notice when the burning process starts, it takes longer than usual to write the lead-in, then it gets to 85% completed and I get the error message and the burn fails.
I bought the burner back to the place of purchase, they tested it and said there was nothing wrong with it. It's an LG DVDRAM burner. The discs I'm using, I've used before and never had any problem with them. I'm not doing anything different than I usually do, I can't think of anything that would cause the error. So I'm thinking it's a software problem, but I have no idea where to start looking for a solution. Can anyone guide me in the right direction please? I'll put up the burn log too, not sure if there's anything in there that'll help. Thanks in advance :)
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 9:49:52 PM
Nero API version: 6.3.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 1 - 6.3.0.0
Adapter driver: <IdeChnDr> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N IdeChnDr Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H10N E: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 39845888 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 247MB (253424kB)
Free physical memory: 70MB (72040kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.1.2007
NeroAPI
1:52:49 PM #1 Phase 112 File APIProgress.cpp, Line 250
DVD-Video files reallocation started
1:52:50 PM #2 Phase 114 File APIProgress.cpp, Line 250
DVD-Video files reallocation completed (no file modified)
1:52:50 PM #3 Phase 111 File APIProgress.cpp, Line 250
DVD-Video files sorted
1:53:02 PM #4 Text 0 File Reader.cpp, Line 118
Reader running
1:53:02 PM #5 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-H10N running
1:53:02 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
1:53:03 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
1:53:03 PM #8 Text 0 File Burncd.cpp, Line 3094
Turn on Disc-At-Once, using DVD media
1:53:04 PM #9 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2286111 (508:01.36)
1:53:04 PM #10 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE
1:53:04 PM #11 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
1:53:04 PM #12 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:53:04 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HL-DT-ST DVDRAM GSA-H10N ]
--------------------------------------------------------------
1:53:04 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41
1:53:05 PM #15 Phase 24 File APIProgress.cpp, Line 250
Caching of files started
1:53:05 PM #16 Text 0 File Burncd.cpp, Line 4061
Cache writing successful.
1:53:05 PM #17 Phase 25 File APIProgress.cpp, Line 250
Caching of files completed
1:53:05 PM #18 Phase 36 File APIProgress.cpp, Line 250
Burn process started at 8x (11,080 KB/s)
1:53:05 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:53:05 PM #20 Text 0 File DVDR.cpp, Line 1424
Recording mode: Sequential Recording Mode
1:53:05 PM #21 Text 0 File Mmc.cpp, Line 19397
Set BUFE: supported -> ON
1:53:05 PM #22 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes
1:53:05 PM #23 Text 0 File Cdrdrv.cpp, Line 7912
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:55:02 PM #24 Text 0 File Cdrdrv.cpp, Line 1276
13:55:02.906 - HL-DT-ST DVDRAM GSA-H10N\H1 T1 : Queue again later
2:03:18 PM #25 SCSI -1039 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x01020000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x1D 0x99 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x34 0x04 0x0C 0x09 0x01
2:03:18 PM #26 CDR -1039 File Writer.cpp, Line 301
Focus or tracking error
2:03:18 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
2:03:18 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
2:03:18 PM #29 Text 0 File DVDR.cpp, Line 1743
EndDAO: Last written address was 1939935
2:03:20 PM #30 Phase 38 File APIProgress.cpp, Line 250
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/20/2006 5:16:24 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/17/2006 4:23:54 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)