PDA

View Full Version : Oversizing w/ Ver 1.20.5


Carolina Mike
11th January 2007, 02:33
I attempted to do The Illusionist (Movie Only). Used HC encoder and the movie size came out to 4,730,777,600 bytes which as we know will not fit on a DVD-5. I told ImgBurn to go ahead and write the files and sure enough it did not fit. The only thing I have done differently is I looked at the Mobile Output section but changed nothing and below is the pertinent info. If someone could tell me where to change the size for the encoding i.e. I like 4350 so it keeps it off the outer rim. If I use QuEnc it then undersizes even the default size. Could someone tell me why the difference w/ the 2 encoders. It does look like HC is not sizing properly or I have made a mistake somewhere

[14:43:27] Phase I, PREPARATION started.
- DVD-RB v1.20.5
- AVISYNTH 2.5.6.0
- HC encoder selected
- "Movie Only" mode is enabled.
- Source: THE_ILLUSIONIST_VOB'D
- VTS_03: 3,472,869 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 156,750 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 63.9%
- Overall Bitrate : 6,397/5,118Kbs
- Space for Video : 4,084,152KB
- HIGH/LOW/TYPICAL Bitrates: 5,613/1,178/5,118 Kbs
[14:49:46] Phase I, PREPARATION completed in 6 minutes.
[14:53:39] Phase II ENCODING started
- Creating M2V for VTS_03 segment 0
- Creating M2V for VTS_03 segment 1
- Creating M2V for VTS_03 segment 2
- Creating M2V for VTS_03 segment 3
- Creating M2V for VTS_03 segment 4
- Creating M2V for VTS_03 segment 5
- Creating M2V for VTS_03 segment 6
- Creating M2V for VTS_03 segment 7
- Creating M2V for VTS_03 segment 8
- Creating M2V for VTS_03 segment 9
- Creating M2V for VTS_03 segment 10
- Creating M2V for VTS_03 segment 11
- Creating M2V for VTS_03 segment 12
- Creating M2V for VTS_03 segment 13
- Creating M2V for VTS_03 segment 14
- Creating M2V for VTS_03 segment 15
- Creating M2V for VTS_03 segment 16
- Creating M2V for VTS_03 segment 17
- Creating M2V for VTS_03 segment 18
- Creating M2V for VTS_03 segment 19
- Creating M2V for VTS_03 segment 20
- Creating M2V for VTS_03 segment 21
- Creating M2V for VTS_03 segment 22
- Creating M2V for VTS_03 segment 23
- Creating M2V for VTS_03 segment 24
- Creating M2V for VTS_03 segment 25
- Creating M2V for VTS_03 segment 26
- Creating M2V for VTS_03 segment 27
- Creating M2V for VTS_03 segment 28
- Creating M2V for VTS_03 segment 29
- Creating M2V for VTS_03 segment 30
- Creating M2V for VTS_03 segment 31
- Creating M2V for VTS_03 segment 32
- Creating M2V for VTS_03 segment 33
- Creating M2V for VTS_03 segment 34
- Extracting STILLS for VTS_03 segment 35
[17:24:21] Phase II ENCODING completed in 151 minutes.
[17:24:21] Phase III, REBUILD started.
- Processing VTS_03
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 4 VOBID 2 CELLID 1
- Rebuilding seg 5 VOBID 2 CELLID 2
- Rebuilding seg 6 VOBID 2 CELLID 3
- Rebuilding seg 7 VOBID 2 CELLID 4
- Rebuilding seg 8 VOBID 2 CELLID 5
- Rebuilding seg 9 VOBID 2 CELLID 6
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 10 VOBID 3 CELLID 1
- Rebuilding seg 11 VOBID 3 CELLID 2
- Rebuilding seg 12 VOBID 3 CELLID 3
- Rebuilding seg 13 VOBID 3 CELLID 4
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 14 VOBID 4 CELLID 1
- Rebuilding seg 15 VOBID 4 CELLID 2
- Rebuilding seg 16 VOBID 4 CELLID 3
- Rebuilding seg 17 VOBID 4 CELLID 4
- Updating NAVPACKS for VOBID_04
- Rebuilding seg 18 VOBID 5 CELLID 1
- Rebuilding seg 19 VOBID 5 CELLID 2
- Rebuilding seg 20 VOBID 5 CELLID 3
- Rebuilding seg 21 VOBID 5 CELLID 4
- Updating NAVPACKS for VOBID_05
- Rebuilding seg 22 VOBID 6 CELLID 1
- Rebuilding seg 23 VOBID 6 CELLID 2
- Rebuilding seg 24 VOBID 6 CELLID 3
- Rebuilding seg 25 VOBID 6 CELLID 4
- Rebuilding seg 26 VOBID 6 CELLID 5
- Updating NAVPACKS for VOBID_06
- Rebuilding seg 27 VOBID 7 CELLID 1
- Rebuilding seg 28 VOBID 7 CELLID 2
- Rebuilding seg 29 VOBID 7 CELLID 3
- Rebuilding seg 30 VOBID 7 CELLID 4
- Rebuilding seg 31 VOBID 7 CELLID 5
- Updating NAVPACKS for VOBID_07
- Rebuilding seg 32 VOBID 8 CELLID 1
- Rebuilding seg 33 VOBID 8 CELLID 2
- Rebuilding seg 34 VOBID 8 CELLID 3
- Updating NAVPACKS for VOBID_08
- Rebuilding seg 35 VOBID 9 CELLID 1
- Updating NAVPACKS for VOBID_09
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Correcting VTS Sectors...
- Building ISO Image...
- ISO Image successfully created.
- Writing ISO image to DVD...
- ISO Image successfully written.
[18:03:11] Phase III, REBUILD completed in 39 minutes.

Done.

[Options]
Mode=5
OneClick=0
ReduceOpt=0
NoWarn=1
AdditionalOutput=1
LogFile=1
QuEncHQ=1
EncoderMinimized=1
RemoveDTS=1
HC_Quality=1
HC_Matrix=1
SkinVersion=12
AudioDub=1
QuEncodeType=0
iDCT=0
GOP=0
DCPrec=0
MainMatrix=Encoder Default
LowMatrix=Same as Main Feature
VLowMatrix=Same as Main Feature
ExtraMatrix=Same as Main Feature
ProCoder_Quality=4
DVD_Label=THE_ILLUSIONIST_VOB'D
DVD_Name=THE_ILLUSIONIST_VOB'D.ISO
MovieOnly=1
HalfD1=00
Convert_16_9=00
DisableInterlace=00
ConvertToYUY2=1
Skin=Rockas Original
ISO_Output=1
ISO_Delete_Option=0
Decrypter_Write=1
Delete_Image_Option=0
Completed=3
[Paths]
QuEnc=C:\Program Files\DVD-RB PRO\Encoders\QuEnc\QuEnc.exe
ReJig=C:\Program Files\DVD-RB PRO\Encoders\ReJig\ReJig.exe
HC=C:\Program Files\DVD-RB PRO\Encoders\HC Encoder\HCbatch.EXE
FFMPEG=C:\Program Files\DVD-RB PRO\Encoders\FFMpeg\ffmpeg.exe
ProCoder=C:\Program Files\DVD-RB PRO\Encoders\EclPro\EclPro.exe
DECOMB=C:\Program Files\AviSynth 2.5\plugins\Decomb521.dll
NICAUDIO=C:\Program Files\AviSynth 2.5\plugins\nicaudio.dll
MPEG2DEC=C:\Program Files\DVD-RB PRO\DGDecode.dll
Working=C:\Documents and Settings\xxxxxxxxxxx\Desktop\DVD_Rebuilder Work Folder\
Output=C:\Documents and Settings\xxxxxxxxxxxx\Desktop\DVD-Rebuilder Finished Movie\
Source=C:\DOCUMENTS AND SETTINGS\xxxxxxxxxxxxxxxx\DESKTOP\THE_ILLUSIONIST_VOB'D\
[Audio]
Selected=10
Remapping=
[Subpictures]
Selected=00
[Mobile]
Template=iPod 4:3 Viewing (320x240) 448Kbs
Format=0
Action=0

Fishman0919
11th January 2007, 13:05
What did you use to rip the movie to your HD?

Did you rip the whole disc, not just main movie?


- Reduction Level for DVD-5: 63.9%
- Overall Bitrate : 6,397/5,118Kbs

seems a little odd.... high compression level for movie only (63.9%) with high bitrate (5,118Kbs)

Carolina Mike
11th January 2007, 13:14
Thanks for answering. Used DVDFAB Dec. , Ripit4Me and also DVDD w/ AnyDVD running. Ripped the whole disk to HD. When it failed the first time I just started playing w/ it to figure out what went wrong. There is nothing special on the DVD Disk as far as encryption but this is the 2nd problem in 1 month I have had using the program . I have just uninstalled the program again but this time I have only installed the program w/o the Mobile input.

jdobbs
12th January 2007, 02:48
I picked that DVD up a little while ago (R1, NTSC). I'll give it a test run and see what I can find. I'll run a full backup first to check out standard sizing and then I'll try it "Movie Only".

jdobbs
12th January 2007, 05:45
I completed the backup in "Full Backup" mode and it completed. It was undersized slightly (4.31GB instead of the more typical 4.32GB but well within expected limits). The "Movie Only" is running now, I'll report what I find when it completes.

Carolina Mike
12th January 2007, 13:00
Jdobbs,
Thanks for trying the movie but can you give a good guess as to what happened when I initially tried it. I d/l'd the program again but this time w/o the Ipod section and It did fine

jdobbs
12th January 2007, 23:07
It came out ok for me using "Movie Only" and HC... 4.32GB.

It had to be related to settings that got reset when you reinstalled. If you look at the DVD-RB executable you will see that the non-MOBILE and MOBILE versions are identical. The only difference between the two installer packages is the inclusion of the FFMPEG executable.

Carolina Mike
13th January 2007, 00:11
Jdobbs,
Thanks for that info. It is working now w/ the new version but I have not been able to get it to duplicate the error so I will give up and say thanks for helping me