PDA

View Full Version : Starting over. Need help.

SmoovySmoov
3rd January 2007, 22:29
So, technically, I guess I'm not a newbie. I was using the combination of DVD Decrypter and DVD Shrink to backup movies for a couple of years. And then recently, one of hard drives I had running in RAID 0 that was my system drive went down, and I have had to start all over with a fresh install of Windows on a IDE drive, losing all my software.

I tried to backup Talladega Nights last night, and DVD Decrypter couldn't handle it. Errored out. So, I downloaded and tried DVDFab Decrypter for the first time. Worked well.

So, then I had to replace Nero so I could burn it with DVD Shrink 3.2.0.15. First, I installed Nero 6.6.0.13, before finding 7.5.9.0A. So, I installed it. Tried to burn with DVD Shrink. Got an error saying:

Burn Error



Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.13
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 13c


=== Scsi-Device-Map ===
CdRomPeripheral : SAMSUNG DVD-ROM SD-616E nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : PLEXTOR DVDR PX-708A nvatabus Port 0 ID 1 DMA: Off
DiskPeripheral : ST3120814A nvatabus Port 0 ID 2 DMA: Off
DiskPeripheral : Maxtor 6L160P0 nvatabus Port 0 ID 3 DMA: Off
DiskPeripheral : SiI RAID 0 Set 0 SI3112r Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616E D: CDRom0
PLEXTOR DVDR PX-708A E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 520MB (532824kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.1.2007
NeroAPI
3:27:44 PM #1 Text 0 File NeroBurnCommon.cpp, Line 66
Message file not found


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/24/2006 9:47:00 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/24/2006 9:47:00 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

So, I figured that this new Nero didn't work with the version of DVD Shrink that I have, and reverted back to the Nero 6 that I had installed. Tried that. Same error. Now I just really would like to know what versions I need to get back to where I used to be. Any help would be appreciated.

Thanks!!!
dialysis1
3rd January 2007, 23:59
Your DMA is off. A full log would be helpful.
SmoovySmoov
4th January 2007, 00:29
Your DMA is off. A full log would be helpful.

I don't know where to look for the full log????
dialysis1
4th January 2007, 01:29
Turn your DMA back on.
http://winhlp.com/WxDMA.htm
What brand of discs are you using?
What speed are you burning at?
setarip_old
4th January 2007, 20:34
@SmoovySmoov

Hi!

You should remove your NERO serial number from your first post...
SmoovySmoov
4th January 2007, 22:09
I've gone to Device Manager, and it says that both my DVD Drive, and my burner that are on that Primary Channel are set at "Let BIOS select transfer mode" and they both are set on "Ultra DMA 2 - Ultra 33". But I did see that in the log where it says DMA is turned off. Suggestions?
setarip_old
4th January 2007, 22:16
In the Device Manager (via the Control

Panel>>System>>Hardware>>Device Manager), you simply

have to remove the applicable IDE channel (Click on

"IDE...Controllers") and let your computer reset it to DMA as

follows:
Right click on the pertinent channel in Device Manager
Click on uninstall
Reboot
After rebooting go back to Device Manager and change the

setting to "DMA if available"...
SmoovySmoov
4th January 2007, 23:23
In the Device Manager (via the Control

Panel>>System>>Hardware>>Device Manager), you simply

have to remove the applicable IDE channel (Click on

"IDE...Controllers") and let your computer reset it to DMA as

follows:
Right click on the pertinent channel in Device Manager
Click on uninstall
Reboot
After rebooting go back to Device Manager and change the

setting to "DMA if available"...

I did this, and when I went back to Device Manager, it was set exactly the same, with the settings above. Furthermore, "DMA if available" isnt even an option. =(
SmoovySmoov
18th January 2007, 01:20
Still having this problem. I had another burner lying around. An NEC DL DVD+-RW that I hadn't installed just because I hadn't found cheap media for it yet. I had tried all the above suggestions to get the DMA back on for the Plextor Drive with no results, so I installed this drive today. Same result. Got the same exact error message above, except for the new NEC burner listed instead of the Plextor. Furthermore, went to properties on the IDE channel, and it says Ultra DMA 2 - Ultra 33 for both the DVD Drive and the burner.

Thoughts??? Is it just a bad copy of Nero, or what? Really wishing I could burn stuff here.
setarip_old
18th January 2007, 08:54
Is it just a bad copy of Nero, or what?Are you asking whether the publisher, Ahead Software, sold you a fouled program (Versus the hundreds of thousands of versions they've sold)?
CWR03
18th January 2007, 12:37
Perhaps go to Microsoft downloads and search for "sony rootkit."