DVD Rebuilder question

[satansraiser]

Granted my problem may be caused by sytem instability (don't worry its fixed now) but never the less I still like some feed back on my log and questions just to know if my DVD is okay. First off I want everyone to know that the oversized settings were done by myself because I found if you set the DVD to 4.36 GB with the Beta segment editior it always gets a couple bytes below the full DVD size. Second I would like acknowledge that when DVD Rebuilder was creating segment 42 it gave the me the error no m2v. file(in the log coloured in dark red). For this error I know that the problem was fixed because when it created the segment the second time it was fine . My Third and most important question is about when DVD Rebuilder was creating segment 51 it gave the error no m2v. file(in the log coloured in blue). Now like before I noticed the problem was fixed but what worries me is that it wrote the error after the stills were extracted. My question is obviously again is everything okay.

-----------------
[00:33:37] Phase I, PREPARATION started.
- DVD-RB v1.10.3
- CCE 2.70.2.0 encoder selected.
- VTS_01: 4,048,395 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 267,747 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 51.2%
- Overall Bitrate : 3,491/2,793Kbs
- Space for Video : 3,806,898KB
- HIGH/LOW/TYPICAL Bitrates: 3,482/1,040/2,793 Kbs
[00:38:45] Phase I, PREPARATION completed in 5 minutes.
- WARNING: Viewer/Editor settings are over target.
[00:39:59] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
[02:17:40] Phase II ENCODING started
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
[08:49:41] Phase II ENCODING started
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Creating M2V for VTS_01 segment 36
- Creating M2V for VTS_01 segment 37
- Creating M2V for VTS_01 segment 38
- Creating M2V for VTS_01 segment 39
- Creating M2V for VTS_01 segment 40
- Creating M2V for VTS_01 segment 41
- Creating M2V for VTS_01 segment 42
-- V01004200004004 empty .M2V, retrying.
- Creating M2V for VTS_01 segment 42
- Creating M2V for VTS_01 segment 43
- Creating M2V for VTS_01 segment 44
- Creating M2V for VTS_01 segment 45
[16:15:06] Phase II ENCODING started
- Creating M2V for VTS_01 segment 45
- Creating M2V for VTS_01 segment 46
- Creating M2V for VTS_01 segment 47
- Creating M2V for VTS_01 segment 48
- Creating M2V for VTS_01 segment 49
- Creating M2V for VTS_01 segment 50
- Creating M2V for VTS_01 segment 51
- Extracting STILLS for VTS_01 segment 52
- Extracting STILLS for VTS_01 segment 53
- Extracting STILLS for VTS_01 segment 54
- Extracting STILLS for VTS_01 segment 55
- Extracting STILLS for VTS_01 segment 56
-- V01005100004013 empty .M2V, retrying.
- Creating M2V for VTS_01 segment 51
[18:06:05] Phase II ENCODING completed in 111 minutes.
[18:55:59] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8
- Rebuilding seg 8 VOBID 1 CELLID 9
- Rebuilding seg 9 VOBID 1 CELLID 10
- Rebuilding seg 10 VOBID 1 CELLID 11
- Rebuilding seg 11 VOBID 1 CELLID 12
- Rebuilding seg 12 VOBID 1 CELLID 13
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 13 VOBID 2 CELLID 1
- Rebuilding seg 14 VOBID 2 CELLID 2
- Rebuilding seg 15 VOBID 2 CELLID 3
- Rebuilding seg 16 VOBID 2 CELLID 4
- Rebuilding seg 17 VOBID 2 CELLID 5
- Rebuilding seg 18 VOBID 2 CELLID 6
- Rebuilding seg 19 VOBID 2 CELLID 7
- Rebuilding seg 20 VOBID 2 CELLID 8
- Rebuilding seg 21 VOBID 2 CELLID 9
- Rebuilding seg 22 VOBID 2 CELLID 10
- Rebuilding seg 23 VOBID 2 CELLID 11
- Rebuilding seg 24 VOBID 2 CELLID 12
- Rebuilding seg 25 VOBID 2 CELLID 13
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 26 VOBID 3 CELLID 1
- Rebuilding seg 27 VOBID 3 CELLID 2
- Rebuilding seg 28 VOBID 3 CELLID 3
- Rebuilding seg 29 VOBID 3 CELLID 4
- Rebuilding seg 30 VOBID 3 CELLID 5
- Rebuilding seg 31 VOBID 3 CELLID 6
- Rebuilding seg 32 VOBID 3 CELLID 7
- Rebuilding seg 33 VOBID 3 CELLID 8
- Rebuilding seg 34 VOBID 3 CELLID 9
- Rebuilding seg 35 VOBID 3 CELLID 10
- Rebuilding seg 36 VOBID 3 CELLID 11
- Rebuilding seg 37 VOBID 3 CELLID 12
- Rebuilding seg 38 VOBID 3 CELLID 13
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 39 VOBID 4 CELLID 1
- Rebuilding seg 40 VOBID 4 CELLID 2
- Rebuilding seg 41 VOBID 4 CELLID 3
- Rebuilding seg 42 VOBID 4 CELLID 4
- Rebuilding seg 43 VOBID 4 CELLID 5
- Rebuilding seg 44 VOBID 4 CELLID 6
- Rebuilding seg 45 VOBID 4 CELLID 7
- Rebuilding seg 46 VOBID 4 CELLID 8
- Rebuilding seg 47 VOBID 4 CELLID 9
- Rebuilding seg 48 VOBID 4 CELLID 10
- Rebuilding seg 49 VOBID 4 CELLID 11
- Rebuilding seg 50 VOBID 4 CELLID 12
- Rebuilding seg 51 VOBID 4 CELLID 13
- Updating NAVPACKS for VOBID_04
- Rebuilding seg 52 VOBID 5 CELLID 1
- Updating NAVPACKS for VOBID_05
- Rebuilding seg 53 VOBID 6 CELLID 1
- Updating NAVPACKS for VOBID_06
- Rebuilding seg 54 VOBID 7 CELLID 1
- Updating NAVPACKS for VOBID_07
- Rebuilding seg 55 VOBID 8 CELLID 1
- Updating NAVPACKS for VOBID_08
- Rebuilding seg 56 VOBID 9 CELLID 1
- Updating NAVPACKS for VOBID_09
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
[19:14:13] Phase III, REBUILD completed in 19 minutes.

Done.

[jdobbs]

Yes, it's ok. DVD Rebuilder would have stopped if it hadn't been corrected. The extracted segments being out of sequence is fine -- that's just a way for DVD-RB to save time by extracting during encoding when possible.