AutoMKV 0.93a - (DVD/TS/AVI/AVS to X264/XviD/WVC1 into MKV/MP4/WMV) update 30/12/2007

[spotter]

hmm, getting back to audio. I regularly encounter audio that seemingly can't be encoded via soundout correctly (either nic or directshow). It encodes, but it seems to be encoding all silence. End up with a file of like 3-4MB (for over 100 minutes of audio).

If I do borrow a page from autogk, and do an azid to convert to the ac3 to wav, run normalize on the wav, and then use nero on the wav, I get a normal 60MB file that is fine.

any ideas? Any chance (in hell?) you could support an azid->normalize->nero method. Tried 2-Pass w/ its output to wav file, and it had the same issue.

[red5goahead]

hmm, getting back to audio. I regularly encounter audio that seemingly can't be encoded via soundout correctly (either nic or directshow). It encodes, but it seems to be encoding all silence. End up with a file of like 3-4MB (for over 100 minutes of audio).

If I do borrow a page from autogk, and do an azid to convert to the ac3 to wav, run normalize on the wav, and then use nero on the wav, I get a normal 60MB file that is fine.

any ideas? Any chance (in hell?) you could support an azid->normalize->nero method. Tried 2-Pass w/ its output to wav file, and it had the same issue.

I've a TS sat ripped file to test that problem. 40MB. really short.
Buzzqw are you interested about it ?
[MODE ITALIAN ON] fai un fischio se ti serve :) [MODE ITALIAN OFF]

[Glorioso]

I have some questions:
1 - MP4 cant handle AC3 audio?
2 - Can i use the same video without re-encode? (ex: i have a mkv h264 video and i want to pass it to a avi, can i do it without re-encode?)

[matrix40]

Hey im trying to install and use with windows vista and am having problems. When it tried to install the others dll they wont copy to system 32 folder. What should i do

[Atak_Snajpera]

Start Windows in safe-mode and try again (keep pressing F5 during boot)

[spotter]

@survivant001

@spotter
feel free to use autocrop/resize or manual crop :rolleyes:

BHH

hmm, well autocrop seems to only crop on the LEFT/RIGHT (is that true?) Not on the top/bottom of a 2.4:1 aspect ratio video (say Harry Potter 5)

For manual crop, would it be possible to add a live preview (ala gknot and others so one can see what one is doing?)

[buzzqw]

@spotter
even the wav file for 2 pass with nero is silenced?
other way is to use ffmpeg, with custom bat
look at custom.bat in \exe\besweet

autocrop: is autocrop.. in all dimension, up, down, left, right
also ... there is a preview button on advanced settings.. near manual crop

@red5goahead
tryed check "use projectX" ?
and yes.. a link can be interesting :)

BHH

[--PlayStation3--]

First, I'd like to thank you so much for your program because I finally got video working on my 360/PS3.

But...

There's no audio. The original .mkv had a 5.1 .dts audio file, but I've managed to convert that to a stereo .wav. I choose the .wav file as the Audio Track 1, but when I hit Start Encoding it tells me that the audio "wasn't processed right. Should I quit? Y/N"

The video file comes out perfect, but no audio... I've tried it multiple times.

Here are my settings:
http://i13.tinypic.com/6xgu3hf.png

Also, does this program support Quad core CPU's? Will it encode faster?

Thanks.

[maja_the_bee]

Hi, buzzqw!!
First of all, thank you for your wonderfull little app. called AutoMKV, it's fantastic!!
I have a question about resizing: i would like AutoMKV to determine the best width for me; but i don't want it to do any cropping. How do i do that?

:thanks:


Oh yes, and felice Anno Nuovo a Te!! :)

[buzzqw]

@--PlayStation3--

are you sure that wav file is ok ?

try playing it with media player, also launch virtualdub and drag&drop on it mkvmaudio.avs (on \temp folder)
you should get a message

you can also try this: launch automkv, load your sample mkv, and use the mkv as audio, then in advanced settings check "use ffmpegsource", and retry encoding

and yes, x264 and xvid (but much more x264) are fully multiprocessor encoder

@maja_the_bee
no, isn't possibile to do automatic resize BUT keeping black bar (and have little sense... imho)
happy new year! (anche a te!)

BHH

[red5goahead]

@red5goahead
tryed check "use projectX" ?
and yes.. a link can be interesting :)
BHH

With ProjextX it work. With delaycut sometimes the audio is not present , sometimes crash and create a huge file to fill hard disk (also I'll try to create a little file to test it).
You have pm for the test of no audio with delaycut and correct audio with projectx with the same file.

[buzzqw]

yea, thanks for the pm!

i know, delaycut can be sometimes picky.. but overall for mpeg2 stream (not ts) is affidable.

... i am looking for other solutions.. anyway :)

BHH

[red5goahead]

you'll have a new pm with the link for test of delaycut crash and looping. Is that case I ripped in mpg2 format.

[survivant001]

@--PlayStation3--

for the ps3 you can choose mp4 with AAC for the sound. Max file lenght is 4 gigs.

what you can do to pass that is this :

automkv : MKV + ac3

mkv2vob : -> vob. use can rename it xxx. m2t it will play on the PS3 without problem.

BUT don't forget to choose the profile PS3_41.xml the 5.1 level is not compatible with the ps3.

[delacroixp]

I'm based in PAL-land but have aquired a couple of NTSC DVD's... The Jungle Book (1967) (http://en.wikipedia.org/wiki/The_Jungle_Book_(1967_film)).
How do I convert back to the 24 fps FILM original ?


:):devil::D
Pascal

[buzzqw]

@delacroixp

if framerate is 29.97 you can select FILM to get down to 23.976

BHH

[survivant001]

@buzzqw is it possible to add a DRF analysis in a pre-process ?

explanations :)

I encoded a movie to 1 DVD, but the result was a movie of 3.3gigs. I reencode the movie with a higher bitrate and got the same result. I checked the output movie with aninaptic, and 80% of the movie was using QF10 and it's the smaller value in my command line .

so is it possible to add a pre-encoding process that will take x% of the movie and encode it. Check if the value hit the supposed movie size, if not do a DRF.. if the DRF hit the smaller value.. just use a smaler value in the command line do again a sample to get a adjusted bitrate.

all that in a option (checkbox. we don't have to use that each time.. but it could help when it needed)

what do you think ?

[eleazar]

@--PlayStation3--

for the ps3 you can choose mp4 with AAC for the sound. Max file lenght is 4 gigs.

Thanks for your help with the PS3 stuff in this thread :) Do you know what easiest way to split a file would be? I encoded a movie and it came out to 20.9gb, so i was hoping to split it into 4 or 5 parts, but i'm not sure if I can do that without re-encoding :(

[valnar]

I just started down the path of converting DVD's with AutoMKV and I'm having a problem achieving a perfect 1:1 PAR. I think I've tried every option in AutoMKV - anamorphic, resizing automatic, autocrop only, manual resize, checking and not checking ITU resize, keeping black borders, cutting black borders, you name it.

I use avinaptic to check.

Sometimes I get perfect 3:2 = 1.5 PAR if I don't cut anything, but most of the time it turns out close to 1:1, but not exact.

Here are some examples with the pertinent snippet from avinaptic

Width Resolution: Original
[ Relevant data ]

Resolution: 720 x 480
Width: multiple of 16
Height: multiple of 32
Average DRF: 20.187618
Standard deviation: 1.473556
Std. dev. weighted mean: 1.207550

[ Video track ]

Codec ID: V_MPEG4/ISO/AVC
Resolution: 720 x 480
Frame aspect ratio: 3:2 = 1.5
Pixel aspect ratio: 163:144 = 1.131944
Display aspect ratio: 163:96 = 1.697916
Framerate: 23.976024 fps
Stream size: 12,034,313 bytes
Play duration: 00:01:06 (66.024291 s)
Bitrate: 1458.167930 kbps
Qf: 0.175977

Width Resolution: Autocrop
[ Relevant data ]

Resolution: 720 x 320
Width: multiple of 16
Height: multiple of 32
Average DRF: 20.592545
Standard deviation: 1.515594
Std. dev. weighted mean: 1.244562

[ Video track ]

Codec ID: V_MPEG4/ISO/AVC
Resolution: 720 x 320
Frame aspect ratio: 9:4 = 2.25
Pixel aspect ratio: 320:321 = 0.996884
Display aspect ratio: 240:107 = 2.242990
Framerate: 23.976024 fps
Stream size: 8,095,827 bytes
Play duration: 00:01:06 (66.024291 s)
Bitrate: 980.951326 kbps
Qf: 0.177577

Width Resolution: Automatic
[ Relevant data ]

Resolution: 720 x 480
Width: multiple of 16
Height: multiple of 32
Average DRF: 20.187618
Standard deviation: 1.473556
Std. dev. weighted mean: 1.207550

[ Video track ]

Codec ID: V_MPEG4/ISO/AVC
Resolution: 720 x 480
Frame aspect ratio: 3:2 = 1.5
Pixel aspect ratio: 215:144 = 1.493055
Display aspect ratio: 215:96 = 2.239583
Framerate: 23.976024 fps
Stream size: 12,034,313 bytes
Play duration: 00:01:06 (66.024291 s)
Bitrate: 1458.167930 kbps
Qf: 0.175977

Width Resolution: Manual resize 720x480, zero crop
[ Relevant data ]

Resolution: 704 x 304
Width: multiple of 32
Height: multiple of 16
Average DRF: 20.740998
Standard deviation: 1.506316
Std. dev. weighted mean: 1.234335

[ Video track ]

Codec ID: V_MPEG4/ISO/AVC
Resolution: 704 x 304
Frame aspect ratio: 44:19 = 2.315789
Pixel aspect ratio: 152:157 = 0.968152
Display aspect ratio: 352:157 = 2.242038
Framerate: 23.976024 fps
Stream size: 8,894,363 bytes
Play duration: 00:01:06 (66.024291 s)
Bitrate: 1077.707958 kbps
Qf: 0.210028

If I do the same thing with megui, I can get a perfect 1:1 PAR without any effort. The Frame aspect ratio and Display aspect ratio also match, which is preferrable.
[ Relevant data ]

Resolution: 720 x 304
Width: multiple of 16
Height: multiple of 16
Average DRF: 21.730259
Standard deviation: 1.713869
Std. dev. weighted mean: 1.461049

[ Video track ]

Codec ID: V_MPEG4/ISO/AVC
Resolution: 720 x 304
Frame aspect ratio: 45:19 = 2.368421 (~2.35:1)
Pixel aspect ratio: 1:1 = 1
Display aspect ratio: 45:19 = 2.368421 (~2.35:1)
Framerate: 23.976024 fps
Stream size: 8,279,680 bytes
Play duration: 00:01:06 (66.024289 s)
Bitrate: 1003.228364 kbps
Qf: 0.191168

Media Player Classic will play all these fine and they appear to be correct AR. Of course, MPC compensates for almost anything.

My ideal is to convert DVD's without a loss of resolution and without black bars, in perfect 1:1 PAR. So if it's a 16:9 anamorphic movie, unanamorphic it first, set PAR 1:1 and upscale resolution if necessary. As you can see from the megui sample, if it's a 1.78, 1.85 or 2.35 movie, the FAR/DAR will reflect that nice and clean.

Is this something achievable in AutoMKV?

-Robert

Edit: I looked briefly at the movie.avs and time.avs scripts that are doing the movie resizing and they seem to have a lot of automated math. I imagine that is causing the rounding errors. Can we simplify that? Or perhaps when the value is so close to a common value, assume it is and fix it? (ie. .96+ = 1.0 or 1.8444 = 1.85)

[survivant001]

I encoded a movie and it came out to 20.9gb, so i was hoping to split it into 4 or 5 parts, but i'm not sure if I can do that without re-encoding :(

it's a lot :)

in autoMKV you can split in file in the target size. I think it's something like "5 4000" not sure.

but there are tools to split files too.. look for them.

[zacoz]

@eleazar & survivant001

It's actually the other way around - chunk size first and then number of chunks. Check out the wiki here: http://automkv.a.wiki-site.com/index.php/Help:Contents#Step_4_-_Set_Disk_Settings

Of course that's only really useful when trying for a target size I believe when encoding which I'm gather you haven't done. Survivant001's advice to look for other tools to split without re-encoding may be more what you are looking for in this case anyway.

[ryc]

@ Buzzqw
As ever offer I modify the values of anime.lvl to operate well with deen Beta 1 (which is most used in Automkv, anime.lvl currently uses the parameters of the beta-2 deen), this use a soft temporary (and space) filtering FluxsmothST, resizing and then a space filtering deen("a2d"), finally filtered the high frequencies with DCTFilter. I tried fairly and in the anime good quality will not harm the details, in the low-quality eliminates noise without harming the details and the compressibility increases well, try and tell me.
When the source is very bad i also put in Advanced Profiles, Advanced AviSynth DGDecode_Debloc (cpu = 4)

@buzzqw AutoMKV 0.93a not remenber DGDecode_Debloc(cpu=4) in jobs, Although it appears in the ini of the job dont do it.
:)

This not work whith QMF_adaptative_lvl, Since apparently Trim the line of lvl at 150 characters

[ryc0203]

@ Buzzqw
As ever offer I modify the values of anime.lvl to operate well with deen Beta 1 (which is most used in Automkv, anime.lvl currently uses the parameters of the beta-2 deen), this use a soft temporary (and space) filtering FluxsmothST, resizing and then a space filtering deen("a2d"), finally filtered the high frequencies with DCTFilter. I tried fairly and in the anime good quality will not harm the details, in the low-quality eliminates noise without harming the details and the compressibility increases well, try and tell me.
When the source is very bad i also put in Advanced Profiles, Advanced AviSynth DGDecode_Debloc (cpu = 4)

@buzzqw AutoMKV 0.93a not remenber DGDecode_Debloc(cpu=4) in jobs, Although it appears in the ini of the job dont do it.
:)

This not work whith QMF_adaptative_lvl, Since apparently Trim the line of lvl at 150 characters

Sorry i Forbiden my password an create a new user, as you see i remenber my password now
:confused:

[ryc0203]

@buzzqw

I changed base.avs and I setmtmode (2.0) and setmemorymax (384) after # loadpluginstart, it work perfectly achieves 100 fps in a movie filtering with spresso, other filters are achieves a 55% increase in fps.

If is possible can you upgrade version of HybridFuPP to 0.98a which is compatible with mt2 and I love the resizing - filtering that his make

PD:
The Filters who I tested and work well with mt2 deen, FluxSmoothST, DCTFilter, Removegrain and Spresso
:)

The link for HybridFuPP 0.98a is http://forum.doom9.org/showthread.php?p=1066769#post1066769

[ryc0203]

@Valnar
I am not an expert or even less, but I have a problem that may be related, when films are NTSC, at the stage of resmovie.avs when running xvidsingle it show 704x528, thats means PAL , but my source is NTSC (720x480) it upscaling height, I suppose it affects how it performs re dimensioning and prediction of adequate size.

:confused:

[valnar]

@Valnar
I am not an expert or even less, but I have a problem that may be related, when films are NTSC, at the stage of resmovie.avs when running xvidsingle it show 704x528, thats means PAL , but my source is NTSC (720x480) it upscaling height, I suppose it affects how it performs re dimensioning and prediction of adequate size.

:confused:

There are tons of posts and information on Doom9 about aspect ratio, and the math to convert PAL/NTSC DVD's can be a little daunting, which is why I rely on tools such as this or Megui to do the heavy lifting. If my post above was wrong, or if perhaps I'm just using the existing options in AutoMKV wrong, please let me know.

After I get that squared away, I have to figure out if anamorphic is worth it! :confused:

-Robert

[delacroixp]

There are tons of posts and information on Doom9 about aspect ratio, and the math to convert PAL/NTSC DVD's can be a little daunting, which is why I rely on tools such as this or Megui to do the heavy lifting. If my post above was wrong, or if perhaps I'm just using the existing options in AutoMKV wrong, please let me know.

After I get that squared away, I have to figure out if anamorphic is worth it! :confused:

-Robert
As a kid I used to practically live in the cinema (before TV in South Africa, 1975) and anamorphic movies have an almost magic allure.
The concept was brilliant and is still ever popular in certain HD video cameras (http://en.wikipedia.org/wiki/HDV) which use 1440x1080 anamorphic Mpeg2 (expandable to 1920x1080).
That said, H264 offers a clean slate and the opportunity to 'clean-up' Mpeg2 movies and re-code into an endless combination of resolution and framerate (with only minor limitations like MOD 2 cropping and MOD 16 w&h).

I also prefer the square-pixel strategy and while many encoders crop and up-size to to anamorphic format (720x576 PAL) or resize to 864x486... I have settled on 800xh for regular movies (after cropping) and 720xh for animations (with a combination of Q20 and Q22 depending on quality, age, extras or B&W). The odd NTSC DVD is resized accordingly and Inverse (http://en.wikipedia.org/wiki/Telecine) Tele (http://neuron2.net/LVG/telecining2.html)cine (http://www.animemusicvideos.org/guides/avtechold/avsivtc.html) applied where possible.
I have also found problems with "rounding errors" and since I manually encode the audio with BeSweet HEv2 profile, I simply enter the AR into MKVmerge GUI downto 4 decimal places (after I've done all the calcs).
Actually, I manually setup the d2v files for AutoMKV with DGIndex aswell... which has been a whole lot of fun but clearly you would prefer a slightly more automated, robust and precise encoding environment.

I hope you come right with your perfect 1:1 PAR (http://forum.doom9.org/showthread.php?p=1081829#post1081829) and perhaps OSS technology will allow us to integrate 5.1 surround and improved audio functionality into AutoMKV at some future point in time.


:):devil::D
Pascal

[survivant001]

@ryc0203 it's not directly related to automkv, but you seem good with filters, do you have a filter for movies and animes that use fft3dgpu0.8.2 ? I don't have the right settings and even worse.. when to use it.

[buzzqw]

i am working on 0.94 alpha
ITU/Anamorphic/Audio delay handling will be rewritten

i will need tester

stay tuned for a alpha

BHH

[vOjToL]

Hi buzzqw!
I've got some issues for you :).
1. Avs as a source- audio is not properly encoding, AutoMKV create mkvaudio.avs and trying processing fixed1.avs (not mkvaudio)which is incorrect.
23:26:09 Copied file I:\WinFast WorkArea\3.avs to I:\WinFast WorkArea\temp\fixed1.avs
23:26:09 Copied file NONE to I:\WinFast WorkArea\temp\fixed2.
23:26:09 Encoding I:\WinFast WorkArea\temp\fixed1.avs To Mp3 with 112 ABR Preset
23:26:23 Unable to encode Audio, trying with DirectShowSource!
23:26:23 Encoding I:\WinFast WorkArea\temp\fixed1.avs To Mp3 with 112 ABR Preset
23:26:38 Unable to encode Audio, even with DirectShowSource!, trying with FFmpeg!
23:26:39 Unable to encode Audio even with DirectShowSource and FFmpeg!
2.When I encoded audio to mp3(open mkvaudio with AvsP.exe and process it), and select as video avs, as audio my mp3, AutoMKV says:

23:44:15 Renamed file fixed1.mp3 to audio.mp3
23:44:15 Encoded 1' Audio Track: 18186352 bytes
23:44:19 Avi engage mode not corrected, switched to DirectShowSource
23:44:23 !!! WARNING - Trying with FFmpegSource

The result avi have a wrong size, bitrate is very big:

23:44:26 FIRST pass XviD: "H:\AutoMKV\exe\encoder\xvid_encraw.exe" -pass1 -bitrate 1321193

[ryc0203]

@ryc0203 it's not directly related to automkv, but you seem good with filters, do you have a filter for movies and animes that use fft3dgpu0.8.2 ? I don't have the right settings and even worse.. when to use it.

I am not good with the filters, it is only the old method of test and error, in relation to fft3dgpu for films can use Diego7_5_FFT3DGPU_King_Of_Queens.lvl, but you have to put in the folder filter of AutoMKV fft3dgpu.dll to anime better use Anime_Slow_Denoise. lvl I upload, because in my opinion deen is better to anime than fft3dgpu, in addition fft3dgpu is very slow.
:)

[Fartingbob]

Big fan of automkv for a while now, just 1 request if its possible.
Can you add a pause button on the encoding window (or main window i guess). I often find i start encoding a DVD and then want to do some gaming, but both end up going at a crawl because my CPU cant cope, even with automkv on lowest priority.

[buzzqw]

@ALL
it's an hard work anamorphic... but is quite done :)

here the "trimmed" script

last=movie.Crop(0,72,720,432)
fixed_aspect = 2.431041
out_width = 656
out_height = 272
SimpleResize(out_width,out_height)

at end the output script, encoding script and muxing script will be very similar to MeGui

the delay can be "fixed" by DelayCut or DelayAudio or Fixed in Muxing (as AutoGK)

HybridFuPP to 0.98a : try ... and report if working :)
resmovie.avs when running xvidsingle it show 704x528, : it's the script for checking autoresize.. isn't the final used script
Avs as a source- audio is not properly encoding, AutoMKV create mkvaudio.avs and trying processing fixed1.avs : fixed
When I encoded audio to mp3(open mkvaudio with AvsP.exe and process it), and select as video avs, as audio my mp3, AutoMKV says:: i will check about.. but is probably that some audio hack (support files) will be removed
This not work whith QMF_adaptative_lvl, Since apparently Trim the line of lvl at 150 characters: seem fixed...
Can you add a pause button on the encoding window: no, not possible

now go coding and testing

BHH

[ryc0203]

@buzzqw
@ALL
resmovie.avs when running xvidsingle it show 704x528, : it's the script for checking autoresize.. isn't the final used script
BHH

I did a test with 20-minute film in the half CD and the resulting size was 704x528 (the source is 720x480)
:confused:

can you include Anime_Slow_Denoise. lvl in AutoMKV, this use correctly Deen for anime (With parameters of beta 1 and not beta 2)

HybridFuPP to 0.98a : try ... and report if working
Testing...

This not work whith QMF_adaptative_lvl, Since apparently Trim the line of lvl at 150 characters: seem fixed...
:thanks:

[Nightshiver]

Hey buzzqw, is it possible to use more than one filter in AutoMKV? Like with the pulldown box, you can only use/pick 1 filter. It would be great to know how to use more than 1.

[jeffy]

Hey buzzqw, is it possible to use more than one filter in AutoMKV? Like with the pulldown box, you can only use/pick 1 filter. It would be great to know how to use more than 1.

join them eg. removegrain(mode=1).degrainmedian(mode=5)

[Nightshiver]

Where? on the "Advanced Profiles Editing" tab and on the "Add to line"?

[jeffy]

Where? on the "Advanced Profiles Editing" tab and on the "Add to line"?
No, I just write them directly on the line Filters.

[buzzqw]

@vOjToL

fixed use of DSS on ifo input
NOTE: the relative vob must be ONE big vob.. not segmented

first round of test is near finished.. if flu goes out i can even publish the first alpha of 0.94

next step is a better (if possible) "copy original" on NOT mpeg2 files

BHH

[valnar]

Buzz,
I noticed all my encodes (show in MPC) have the title listed as
Done with AutoMKV 0.93 http://forum.doom9.org/showthread.php?p=854221

Can that be changed?

Robert

[buzzqw]

yes, can be set to other string

in advanced settings write in "title" something (in muxing options)

BHH

[valnar]

yes, can be set to other string

in advanced settings write in "title" something (in muxing options)

BHH

Ah. duh! OK, thanks Buzz.

[Zow]

Strange: Since I installed the latest build, I haven't been able to rip a single Video_ts to mkv:-( It was also happening intermitently with the last build, but usually it worked on retry.

It seems to start O.K., but when I come back after the rip is finished, there is no mkv file.

Here are my logs. Any ideas?

[zacoz]

@Zow

Attachments can take a while to get approved, you're normally better off pasting them in your post inside CODE tags.

Are you talking about ripping VIDEO_TS.IFO / VIDEO_TS.VOB or just the VIDEO_TS directory generally? I didn't think AutoMKV ever worked on the former - think there's a few posts discussing that which I contributed to from memory (will try to find it).

Edit: Found post (http://forum.doom9.org/showthread.php?p=1066313#post1066313)

[buzzqw]

@Zow

if you have a single VTS/PGC (a series of vob all belonging to same movie, without extras) you can point automkv to the first vob

BHH

[Zow]

Thanks!

It seems to be working now (it's at 12.%), after I selected the VTS_01_0.IFO file in the Video_TS folder.

When I tried selecting the VTS_01_1.VOB file, it didn't appear to be showing the correct audio stream, and it didn't show any available subtitles. Who knows, maybe my files are screwed up, but they shouldn't really be (ripped with DVDShrink.)

I was doing it wrong before, apparently:-) Two versions ago, I was just selecting the VIDEO_TS.IFO and it worked fine, but the last version was a bit pickier and it would not produce mkvs intermittently, and this current one just refuses to do them if I select the VIDEO_TS.IFO.

Anyway, it looks like it's smooth sailing again now. [Wrong. See below]

Thanks again.

[Zow]

It didn't work:-( After going through the motions, there is still no mkv file.

Here is the VTS_01_0.IFO log first:

[edit: no need for the long code any longer, see buzzqw response below]

[buzzqw]

06:52:31 Only Movie Size: 2661780480 bytes

the encoding is fine

the proble is the destination folder \\TERRA1\share\Movies\temp\

not supported, just map the share (like k: )

BHH

[Zow]

Thanks, buzzqw!

I'll try ripping it to the local drive.

But, this is a new change, or am I dreaming that I was able to rip a whole bunch of movies to the same location (NAS) in the previous builds?

P.S. It worked fine when I ripped to an attached USB drive, instead of to my NAS. BTW, it works perfectly when I select the VIDEO_TS.IFO file (as long there is only one sequence of VOBs, if more than one, it rips only the first sequence:-)

Thanks again.

[delacroixp]

P.S. It worked fine when I ripped to an attached USB drive, instead of to my NAS. BTW, it works perfectly when I select the VIDEO_TS.IFO file (as long there is only one sequence of VOBs, if more than one, it rips only the first sequence:-)

If you want total control of your wayward Vob's... consider loading them up directly into DGIndex (AutoMKV093\exe\DGIndex\DGIndex.exe).

As long as the VOBs have the same resolution/format... you can keep on adding... and then select the section ([...]) of your choice (nice for cutting out bits and pieces). I've loaded up multiple DVD's from the same series into a single MKV... perfect for your "all in one" strategy (hopefully MKV will be releasing tools for chapters and menus, later this month) !
Save project... and then load the d2v file into AutoMKV (and 1 or 2 audio tracks).

It's a little more complicated if you plan to include subtitles.


:):devil::D
Pascal

[Zow]

If you want total control of your wayward Vob's... consider loading them up directly into DGIndex (AutoMKV093\exe\DGIndex\DGIndex.exe)....

It's a little more complicated if you plan to include subtitles.


:):devil::D
Pascal

Great tip, delacroixp.

I played with it and have a couple of questions:

1. How do I get subtitles with it?

2. Does it affect the quality of the final rip (I see options to force "film," select different iDCT algorithms, etc., which makes me think that it does processing while combining the VOBs - would running the resulting file through AutoMKV mean processing twice?)

Thanks.

[buzzqw]

1) you must rip subs separately and add it with the button

2) NO. simply does your d2v. the hard job is done by automkv

BHH

[Glorioso]

I'm using fddshow to colate subs to the final AVI, is there other way?

[ricardo.santos]

where will you see the final avi? ps3/xbox360? from what i've been reading here the only possible way is by using ffdshow or adding the subtitle in the avs, both ways you'll have permanent subs

textsub("subtitle.srt")

ive read that both ps3/xbox360 firmware update makes it possible to play divx (divx container) if the support is complete you can have switchable subs, altough automk converts to avi(xvid) you'll still need another step to mux in the subs and create a *.divx file. Dr divx would be a good choice since it does all that in a few clicks.

all in all, it depends where you will watch the video

[delacroixp]

2. Does it affect the quality of the final rip (I see options to force "film," select different iDCT algorithms, etc.,
which makes me think that it does processing while combining the VOBs -
would running the resulting file through AutoMKV mean processing twice?)

Normally, DGIndex does a straight analysis and reports on the state of your VOB's... demuxing the audio tracks at the same time. It's simply preprocessing to get the job ready for X264.
That said, DGIndex has tremendous depth and power to modify and otherwise improve your final encode.
Force Film is a case in point... gr8 for inversing the telecine of NTSC movies backto 24 fps and saving you a whole bunch of bits and bytes (the extra frames were just lazing about anyway).


:):devil::D
Pascal

[delacroixp]

the hard job is done by automkv

Well, let's face it... X264 does the hard work... but AutoMKV is the 'Conductor of the orchestra' or perhaps, the 'Leader of the band'.


:):devil::D
Pascal

[valnar]

I'm having a hard time finding the correct button to press in advanced settings to accomplish what I want. I believe it may be a manual process or number I have to type in, but I think Megui does it automatically.

I want to take an NTSC 720x480 DVD, which is actually an anamporhic 2.35:1 movie and keep the anamorphic flag intact without any resizing or cropping. In this movie's case, yes, there will still be some black bars that get encoded. I've come up with all kinds of variations of that with AutoMKV.

If I play a sample of the original DVD in Media Player Classic, it shows the expanded "video size" of 853x480 even though the encoded MPEG2 video is DVD standard 720x480 29.97fps.

1) What's the proper procedure to leave anamorphic 16:9 intact when going from DVD to an MKV?

2) As an alternate method, would it be better for overall compatibility to encode it PAR 1:1 at 853x480? (Even so, I can't get AutoMKV to do that either)

-Robert

[Zow]

What should I use to rip the subtitles?

I don't want them "burnt-in" and also hope that there wouldn't be syncing issues. Otherwise, this sounds like a perfect solution for multi-part DVDs.

[buzzqw]

@valnar @delacroixp

... :mad: why all my vobs (pal and ntsc) play in mpc at 720x576 or 720x480 and never at different resolutions ?

isn't easy to understand anamorphic if you can't see it :mad::mad:

@Zow

even if you add it as external subs, the rules for muxing/encrust are always the same: default are mux, but on advanced settings you can burnt-in

BHH

[buzzqw]

on anamorphic (NTSC): (not cropped) link to sample http://www.64k.it/andres/data/a/ntsc_anamorphic.mkv

would this report be ok ???

[ Relevant data ]

Resolution: 720 x 480
Width: multiple of 16
Height: multiple of 32

[ Video track ]

Codec ID: V_MPEG4/ISO/AVC
Resolution: 720 x 480
Frame aspect ratio: 3:2 = 1.5
Pixel aspect ratio: 853:720 = 1.184722
Display aspect ratio: 853:480 = 1.777083 (~16:9)
Framerate: 29.970030 fps


EDIT

and this for a PAL movie (anamorphic not cropped) http://www.64k.it/andres/data/a/pal_anamorphic.mkv

[ Relevant data ]

Resolution: 720 x 576
Width: multiple of 16
Height: multiple of 32

[ Video track ]

Codec ID: V_MPEG4/ISO/AVC
Resolution: 720 x 576
Frame aspect ratio: 5:4 = 1.25
Pixel aspect ratio: 64:45 = 1.422222
Display aspect ratio: 16:9 = 1.777777

BHH

[valnar]

on anamorphic (NTSC): (not cropped) link to sample http://www.64k.it/andres/data/a/ntsc_anamorphic.mkv

would this report be ok ???

[ Relevant data ]

Resolution: 720 x 480
Width: multiple of 16
Height: multiple of 32

[ Video track ]

Codec ID: V_MPEG4/ISO/AVC
Resolution: 720 x 480
Frame aspect ratio: 3:2 = 1.5
Pixel aspect ratio: 853:720 = 1.184722
Display aspect ratio: 853:480 = 1.777083 (~16:9)
Framerate: 29.970030 fps


EDIT

and this for a PAL movie (anamorphic not cropped) http://www.64k.it/andres/data/a/pal_anamorphic.mkv

[ Relevant data ]

Resolution: 720 x 576
Width: multiple of 16
Height: multiple of 32

[ Video track ]

Codec ID: V_MPEG4/ISO/AVC
Resolution: 720 x 576
Frame aspect ratio: 5:4 = 1.25
Pixel aspect ratio: 64:45 = 1.422222
Display aspect ratio: 16:9 = 1.777777

BHH


Yes, I think that works. I toggled 16:9 mode and default in MPC and nothing changed, so it must be working. OK, how?!

[buzzqw]

Yes, I think that works. I toggled 16:9 mode and default in MPC and nothing changed, so it must be working. OK, how?!

time for the 0.95 beta ;)

i will open a new thread for the beta testing of 0.95

a great thanks to valnar and red5goahead for patience and time while testing the first alpha builds

BHH

[valnar]

time for the 0.95 beta ;)

i will open a new thread for the beta testing of 0.95

a great thanks to valnar and red5goahead for patience and time while testing the first alpha builds

BHH

No problem. :thanks:

And if you can work out the math in the next build to even compensate for anamorphic *including* the removal of black bars, that would save the rest of us from tearing our hair out daily. :) 'Dunno if that's even possible.

-Robert

[buzzqw]

afaik shoud be already ok ... :confused: don't know..

anyway grab the first 0.95 beta, it's newer of 0.94m

BHH

[delacroixp]

I'm having a hard time finding the correct button to press in advanced settings to accomplish what I want. I believe it may be a manual process or number I have to type in, but I think Megui does it automatically.

1) What's the proper procedure to leave anamorphic 16:9 intact when going from DVD to an MKV?

2) As an alternate method, would it be better for overall compatibility to encode it PAR 1:1 at 853x480? (Even so, I can't get AutoMKV to do that either)

It may be a plan to do everything manually a couple of times untill you fully understand the process involved.
I laid out a 4 point plan (http://forum.doom9.org/showthread.php?p=1075130#post1075130) to get the job done (PAL 16:9).


:):devil::D
Pascal


ps
Nothing beats the original for sheer prestine perfection... any recode will cause some downgrade in quality.
That said, getting rid of black matte and resizing to PAR 1:1 is already an improvement of sorts.
853x480 is all "smoke and mirrors"... 720x480 has only 345,600 pixels which have been stretch to 409,440 pixels. You can stretch and upscale a 640x480 picture anyway you choose but the fact remains that you only have 307,200 original pixels to work with.

A "720x480 anamorphic" to "PAR 1:1 square pixel" conversion = 768x432 (Mod16 & 16:9 @ 331,776 pixels... pretty close to 345,600).
(After cropping... your pixel count will probably drop below 331 kp anyway)

[Belarathon]

Buzz:

I have tried at least a dozen WMV encoding solutions, and this one spanks the rest hands down.

With respect, may I ask why the 48Khz sampling rate audio is no longer (or not) available in the Zune profiles? As 99% of my source material is 48Khz, doesn't it make sense to encode at the same rate? I'm kind of a green horn at this stuff, but wouldn't the pitch on a 44Khz encode be off as a result of the lower sampling rate? Zune is quite capable of 48Khz. In fact, while experimenting, I tried the generic 1 pass WMV9 profile, and inadvertently chose 128kbps, 48Khz, 24 bit audio. Incredibly, Zune took it without converting. Granted, there would be no benefit to upsampling 16 bit audio, but curious nonetheless.

Thanks for a fine product; well worth a trip to PayPal.

Best,
CF

[buzzqw]

@Belarathon

thanks for your kind words!

about Zune.. i haven't one.. and my "official Zune tester" (weaver4) never reported problems or suggestions about 48000 hz audio in Zune

feel free to test with build (removed limitation of 44khz to zune) http://www.64k.it/andres/data/a/AutoMKV095beta-Zune.exe

BHH

[Belarathon]

Beautiful! TNX! :o

Consider me another resident Zunester at your disposal. I have dozens of encoding jobs on the back burner, so all kinds of opportunities to experiment.

BTW, Zune also handles WMA Pro without converting as well.

[buzzqw]

afaik there are several model of Zune.. don't know if all model can play wma pro.. or 48 khz... :confused:

BHH

[Belarathon]

afaik there are several model of Zune.. don't know if all model can play wma pro.. or 48 khz... :confused:

BHH


Mine is a Zune 30 (first gen, and old firmware and software (1.3):)

[buzzqw]

don't want to miss respect.. but are you sure that Zune can handle WMA Pro ?

AutomKV can use WMA Pro to 768 kbps 96khz 8ch 24bits

i actually cap zune to max 192kbps and NOW 48khz wma std

... .. ...

the change is easy.. just change some rows in profile and on code.. but i must be secure of this (a link at hand about zune specs ?

BHH

[Belarathon]

don't want to miss respect.. but are you sure that Zune can handle WMA Pro ?


BHH

I'll see what I can come up with in regards to an official spec sheet - but I've found that it is much more capable than the specs indicate. I know for certain that I synchronized two clips with 192kbps, 48Khz WMAPro.

When you connect the Zune and add clips, it'll do one of two things: Sync, or convert to a compatible format. Both of those clips synced and played without issue. I can't image a practical application for high resolution audio beyond 192 and 16 bit though...at least not for video clips.
It seems pretty particular about video bitrate...you can't go much beyond 800kbps without it wanting to convert.

[froggy1]

don't want to miss respect.. but are you sure that Zune can handle WMA Pro ?

AutomKV can use WMA Pro to 768 kbps 96khz 8ch 24bits

i actually cap zune to max 192kbps and NOW 48khz wma std

... .. ...

the change is easy.. just change some rows in profile and on code.. but i must be secure of this (a link at hand about zune specs ?

BHH

Maybe this can be helpful - http://www.zune.net/en-us/products/compare.htm

[buzzqw]

Windows Media® Audio Standard[4] (WMA) (.wma): Up to 320 Kbps; constant bit rate (CBR) and variable bit rate
(VBR) up to 48-kHz sample rate.
WMA Pro 2-channel up to 384 Kbps; CBR and VBR up to 48-kHz.

interesting... seems all Zune have the same Audio capacity

thanks for the link

BHH

[Encoder888]

@ buzzqw

As always, great work, you're totally the man in so many ways. I have one quick question:

I'm using an x264 Constant_Quality profile with an 18 quantizer. I kept that constant and I tried adjusting the Specify Quality value in the Advanced Settings, but that does not seem to affect the size/quality of the CQ profile at all. I was just wondering if that was normal. Is the quantizer the only way to directly adjust CQ quality (aside from AQ, filters, etc.) ?

Thanks.

[buzzqw]

specify quality have priority over constant quantitizer

if you "specify the quality" , the cq you selected (in pop up window) is ignored

just use one or other

.. the main difference between "specify quality" and crf profile is that "specify quality" will use the actual profile selected but will apply a crf encoding

so you can turn the "1 pass fastet" i a very fast crf encoding
or use the "insane" to use always a crf encoding, always 1 pass, but with "insane" settings... slow

best regards

BHH

[artisticcheese]

Hi,

I'm exhaused all avenues trying to find out how to solve error message which I get converting x264 MKV to XVID AVI file.
I know I have all neccessary decoders on a system since I can play MKV file just find inside Windows Media Player but yet I'm still getting this error message. What do I do next?
I looked at the line preceeding error and it contains following command:
"C:\Program Files\automkv\exe\BeSweet\ffmpeg.exe" -threads 4 -i "C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.mkv" -vcodec libxvid -bf 2 -b 98787000 -s 1920x816 -r 23.976 -o "C:\Program Files\automkv\temp\movie.avi"
If I execute it manually it fails with "-o" is unrecognized option.?



15:15:38 0.93 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
15:15:38 OS Version: Windows Server 2003
15:15:38 Selected Input file: C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.mkv
15:15:38 Selected Output dir: C:\Program Files\automkv\temp\
15:15:38 Selected Final Name: The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample
15:15:38 Selected Container type: AVI
15:15:38 Selected Encoder: XviD
15:15:38 Selected Size: Unlimited File Size
15:15:38 Selected Profile: Constant_Quality.xml
15:15:38 Selected Resizer: NONE / Original
15:15:38 Selected Filters: RemoveGrain(mode=2)
15:15:38 Selected Deinterlacer: AUTO
15:15:38 Selected Field Order: AUTO
15:15:38 NeroAACEnc.exe: not present
15:15:38 Enabled Constant Quality With Unlimited Size (Q 2)
15:15:38 Enabled CRF/CQ AutoRes at 2 value
15:15:38 Using Matrix: Didees SixOfNine-HVS.cqm
15:15:38 Track Language 1: The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.mkv
15:15:38 Audio Codec 1: Copy Original
15:15:38 Track Language 2: NONE
15:15:38 Audio Codec 2: Lame
15:15:38 Selected Unlimited media size
15:15:42 Avi engage mode not corrected, switched to DirectShowSource
15:17:32 Number of Frames: 1404
15:17:32 Framerate: 23.976044
15:17:32 Movie length in Seconds: 59
15:17:32 Movie Width/Height: 1920/816
15:17:32 Number of Frames: 1404
15:17:32 Framerate: 23.976044
15:17:32 Movie length in Seconds: 59
15:17:32 Movie Width/Height: 1920/816
15:21:41 Source is declared tff by a margin of 1/0.
15:21:41 Advanced Deinterlace Routines Log
15:21:41 Analyzed 559 sections of five frames
15:21:41 Found Interlace Sections: 0 0.00%
15:21:41 Found Progressive Sections:559 100.00%
15:21:41 Found Telecined Sections: 0 0.00%
15:21:41 Found Zero Mov: 100.00% 559
15:21:41 Found One Mov: 0.00% 0
15:21:41 Found Two Mov: 0.00% 0
15:21:41 Found Three Mov: 0.00% 0
15:21:41 Found Four Mov: 0.00% 0
15:21:41 Found Five Mov: 0.00% 0
15:21:41 The Movie is declared to progressive
15:21:41 Extracted Audio with FFmpeg!
15:22:19 Size Audio Extracted: 4684800
15:22:19 CQ encoding XviD: C:\Program Files\automkv\exe\encoder\xvid_encraw.exe -cq 2 -max_bframes 2 -imax 31 -quality 6 -vhqmode 1 -qtype 0 -pmax 31 -bmax 31 -bquant_ratio 100 -bquant_offset 0 -nopacked -nochromame -bvhq -threads 0 -qmatrix "C:\Program Files\automkv\profiles\XviD-profiles\matrix\Didees SixOfNine-HVS.cqm" -i "C:\Program Files\automkv\temp\movie.avs" -type 2 -avi "C:\Program Files\automkv\temp\movie.avi"
15:22:22 Accepted values are between 697303040 and 741343232 bytes (movie+audio)
15:22:22 Got a file of size: -1 bytes + audio size 4684800 bytes (4684799)
15:22:23 BREAK ! FILE NOT SUPPORTED ! LAST TRY WITH FFMPEG!
15:22:23 Switched to FFmpeg for Video Encoding!
15:22:23 FFmpeg.exe String: "C:\Program Files\automkv\exe\BeSweet\ffmpeg.exe" -threads 4 -i "C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.mkv" -vcodec libxvid -bf 2 -b 98787000 -s 1920x816 -r 23.976 -o "C:\Program Files\automkv\temp\movie.avi"
15:22:24 Fished FFmpeg Encoding!
15:22:25 Using VirtualDubMod for Muxing!

[buzzqw]

@artisticcheese

download the new 0.95 beta http://www.64k.it/andres/data/a/AutoMKV095beta2.exe
download the new ffmpegsource 1.14 http://ivtc.org/new/FFmpegSource-1.14.rar

then try checking "use ffmpegsource" AND DON'T move ffmpeg encoding from NONE

BHH

[artisticcheese]

@artisticcheese

download the new 0.95 beta http://www.64k.it/andres/data/a/AutoMKV095beta2.exe
download the new ffmpegsource 1.14 http://ivtc.org/new/FFmpegSource-1.14.rar

then try checking "use ffmpegsource" AND DON'T move ffmpeg encoding from NONE

BHH
But current version definetely has a bug, if I choose "copy original" for audio, it's supposed to use -caudio auto instead of -o which is causing current version to fail. Can this be fixed instead of going to new beta version of everything.

[Encoder888]

specify quality have priority over constant quantitizer

if you "specify the quality" , the cq you selected (in pop up window) is ignored

just use one or other

That's what I thought too, but I tried encoding a movie with a CQ profile at 18 quantitizer at 90% "specified quality" and then I did the EXACT same thing only this time at 100%, again 18 quantitizer and everything else exactly the same, and I got the EXACT same result.

So, it seems to me that the "specified quality" is the one that gets ignored when you use it with a pure CQ profile ??

[artisticcheese]

@artisticcheese

download the new 0.95 beta http://www.64k.it/andres/data/a/AutoMKV095beta2.exe
download the new ffmpegsource 1.14 http://ivtc.org/new/FFmpegSource-1.14.rar

then try checking "use ffmpegsource" AND DON'T move ffmpeg encoding from NONE

BHH
New version has the same issue.


16:06:36 FFmpeg.exe String: "C:\Program Files\automkv\exe\BeSweet\ffmpeg.exe" -threads 4 -i "C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.mkv" -vcodec libxvid -bf 2 -b 98787000 -s 1920x816 -r 23.976 "C:\downloads\The.Kingdom\temp\movie.avi"




15:56:39 0.95 beta2 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
15:56:39 OS Version: Windows Server 2003
15:56:39 Selected Input file: C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.mkv
15:56:39 Selected Output dir: C:\downloads\The.Kingdom\temp\
15:56:39 Selected Final Name: The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample
15:56:39 Selected Container type: AVI
15:56:39 Selected Encoder: XviD
15:56:39 Selected Size: Unlimited File Size
15:56:39 Selected Profile: Constant_Quality.xml
15:56:39 Selected Resizer: NONE / Original
15:56:39 Selected Filters: RemoveGrain(mode=2)
15:56:39 Selected Deinterlacer: AUTO
15:56:39 Selected Field Order: AUTO
15:56:39 NeroAACEnc.exe: not present
15:56:39 Enabled Constant Quality With Unlimited Size (Q 2)
15:56:39 Enabled FFmpegSource
15:56:39 Using Matrix: Didees SixOfNine-HVS.cqm
15:56:39 Track Language 1: The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.mkv
15:56:39 Audio Codec 1: Copy Original
15:56:39 Track Language 2: NONE
15:56:39 Audio Codec 2: Lame
15:56:39 Selected Unlimited media size
15:56:41 Extracted Audio with FFmpeg!
15:56:43 Size Audio Extracted: 4684800
15:58:34 Aspect ratio: 2.35
15:58:34 Number of Frames: 1404
15:58:34 Framerate: 23.976
15:58:34 Movie length in Seconds: 59
15:58:34 Movie Width/Height: 1920/816
16:05:51 Source is declared tff by a margin of 1/0.
16:05:51 Advanced Deinterlace Routines Log
16:05:51 Analyzed 558 sections of five frames
16:05:51 Found Interlace Sections: 0 0.00%
16:05:51 Found Progressive Sections:558 100.00%
16:05:51 Found Telecined Sections: 0 0.00%
16:05:51 Found Zero Mov: 100.00% 558
16:05:51 Found One Mov: 0.00% 0
16:05:51 Found Two Mov: 0.00% 0
16:05:51 Found Three Mov: 0.00% 0
16:05:51 Found Four Mov: 0.00% 0
16:05:51 Found Five Mov: 0.00% 0
16:05:51 The Movie is declared to progressive
16:05:51 CQ encoding XviD: C:\Program Files\automkv\exe\encoder\xvid_encraw.exe -cq 2 -max_bframes 2 -imax 31 -quality 6 -vhqmode 1 -qtype 0 -pmax 31 -bmax 31 -bquant_ratio 100 -bquant_offset 0 -nopacked -nochromame -bvhq -threads 0 -par AUTO -qmatrix "C:\Program Files\automkv\profiles\XviD-profiles\matrix\Didees SixOfNine-HVS.cqm" -i "C:\downloads\The.Kingdom\temp\movie.avs" -type 2 -avi "C:\downloads\The.Kingdom\temp\movie.avi"
16:06:26 Accepted values are between 697303040 and 741343232 bytes (movie+audio)
16:06:26 Got a file of size: -1 bytes + audio size 4684800 bytes (4684799)
16:06:36 BREAK ! FILE NOT SUPPORTED ! LAST TRY WITH FFMPEG!
16:06:36 Switched to FFmpeg for Video Encoding!
16:06:36 FFmpeg.exe String: "C:\Program Files\automkv\exe\BeSweet\ffmpeg.exe" -threads 4 -i "C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.mkv" -vcodec libxvid -bf 2 -b 98787000 -s 1920x816 -r 23.976 "C:\downloads\The.Kingdom\temp\movie.avi"
16:06:40 Fished FFmpeg Encoding!
16:06:40 Using VirtualDubMod for Muxing!

[steveski]

Hi,

I'm trying to encode 2 audio tracks into output file.
The first one encodes fine, but after a .aac file is generated for the second track the application has an error and asks me if I want to go ahead without audio or not (the child process), then after clicking No, it goes ahead and converts to aac with Nero Digital but overwrites the first one.

Can you please fix this naming issue in a future release?

Thanks,

steveski

[buzzqw]

@Encoder888
my bad. i have fixed this issues, the constant quality profile is indipendent from specify quality options.
The "specify quality" trigger crf encoding only for 1 pass or 2 pass encoding. :o

@artisticcheese
please link me a sample to download and test

BHH

[artisticcheese]

@artisticcheese
please link me a sample to download and test

BHH
Here is the file (http://www.divshare.com/download/3390950-350)

Make sure you choose "Copy Original" for audio encoding.

[buzzqw]

downloading...

EDIT: 30 minutes later.. is still downloading... (it's slooow!)

BHH

EDIT2: it's encoding.. but my machine haven't enough power.. :( (p4 2.6 northwood)
i will reort again when muxing finished

[buzzqw]

Done succesfully!
with automkv 0.95beta 2, ffmpegsource 1.14

16:39:04 0.95 beta2 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
16:39:04 OS Version: Windows XP
16:39:04 Selected Input file: C:\Programmi\PureBasic410\_test files\The Kingdom.mkv
16:39:04 Selected Output dir: C:\Programmi\PureBasic410\_test files\temp\
16:39:04 Selected Final Name: The Kingdom
16:39:04 Selected Container type: AVI
16:39:04 Selected Encoder: XviD
16:39:04 Selected Size: Unlimited File Size
16:39:04 Selected Profile: Constant_Quality.xml
16:39:04 Selected Resizer: NONE / Original
16:39:04 Selected Filters: RemoveGrain(mode=2)
16:39:04 Selected Deinterlacer: NONE
16:39:04 Selected Field Order: AUTO
16:39:04 Enabled Constant Quality With Unlimited Size (Q 2)
16:39:04 Enabled FFmpegSource
16:39:04 Using Matrix: Didees SixOfNine-HVS.cqm
16:39:04 Track Language 1: The Kingdom.mkv
16:39:04 Audio Codec 1: Copy Original
16:39:04 Track Language 2: NONE
16:39:04 Audio Codec 2: Lame
16:39:04 Selected Unlimited media size
16:39:05 Extracted Audio with FFmpeg!
16:39:09 Size Audio Extracted: 4684800
16:40:43 Aspect ratio: 2.35
16:40:43 Number of Frames: 1404
16:40:43 Framerate: 23.976
16:40:43 Movie length in Seconds: 59
16:40:43 Movie Width/Height: 1920/816
16:40:43 CQ encoding XviD: C:\Programmi\PureBasic410\AutoMKV\exe\encoder\xvid_encraw.exe -cq 2 -max_bframes 2 -imax 31 -quality 6 -vhqmode 1 -qtype 0 -pmax 31 -bmax 31 -bquant_ratio 100 -bquant_offset 0 -nopacked -nochromame -bvhq -threads 0 -par AUTO -qmatrix "C:\Programmi\PureBasic410\AutoMKV\profiles\XviD-profiles\matrix\Didees SixOfNine-HVS.cqm" -i "C:\Programmi\PureBasic410\_test files\temp\movie.avs" -type 2 -avi "C:\Programmi\PureBasic410\_test files\temp\movie.avi"
16:52:52 Accepted values are between 996147 and 1059062 bytes (movie+audio)
16:52:52 Got a file of size: 176580768 bytes + audio size 4684800 bytes (181265568)
16:52:52 Only Movie Size: 176580768 bytes
16:52:52 Using VirtualDubMod for Muxing!
16:53:06 Encoding finished: 00:12:23 elapsed time
16:53:06 -----------------------------------------------------------------------
16:53:06 Script AutoCrop.log
16:53:06
16:53:06 Crop(0,0,1920,816)
16:53:06 -----------------------------------------------------------------------
16:53:06 Script movie.avs
16:53:06 [cut load plugin part]
16:53:06
16:53:06 #loadpluginstart
16:53:06
16:53:06 #test1
16:53:06
16:53:06
16:53:06 #importstart
16:53:06
16:53:06 #test2
16:53:06
16:53:06 movie = FFmpegSource("C:\Programmi\PureBasic410\_test files\The Kingdom.mkv",vtrack=-1,atrack=-2,seekmode=0,timecodes="Test.timecodes",vcache=true,vcachefile="Test.ffcache")
16:53:06 movie = isRGB(movie) ? ConvertToYV12(movie) : movie
16:53:06 movie = isYUY2(movie) ? ConvertToYV12(movie) : movie
16:53:06 movie = AssumeFPS(movie,24000,1001)
16:53:06 function getOrder(clip c) {
16:53:06 order = GetParity(c) ? 1 : 0
16:53:06 Return order }
16:53:06 #filter1start
16:53:06
16:53:06 #test3
16:53:06
16:53:06 last = movie
16:53:07 fixed_aspect = 2.352941
16:53:07 out_width = 1920
16:53:07 out_height = 816
16:53:07 #resizestart
16:53:07
16:53:07 #test4
16:53:07
16:53:07 #filter2start
16:53:07
16:53:07 #test5
16:53:07
16:53:07 RemoveGrain(mode=2)
16:53:07 -----------------------------------------------------------------------
16:53:07 Script VirtualDubMod.vcf
16:53:07
16:53:07 VirtualDub.Open("C:\\Programmi\\PureBasic410\\_test files\\temp\\movie.avi",0,0);
16:53:07 VirtualDub.RemoveInputStreams();
16:53:07 VirtualDub.stream[0].SetSource("C:\\Programmi\\PureBasic410\\_test files\\temp\\audio.ac3",0x00000203,0);
16:53:07 VirtualDub.stream[0].DeleteComments(1);
16:53:07 VirtualDub.stream[0].AdjustChapters(1);
16:53:07 VirtualDub.stream[0].SetMode(0);
16:53:07 VirtualDub.stream[0].SetInterleave(1,500,1,0,0);
16:53:07 VirtualDub.stream[0].SetClipMode(1,1);
16:53:07 VirtualDub.stream[0].SetConversion(0,0,0,0,0);
16:53:07 VirtualDub.stream[0].SetVolume();
16:53:07 VirtualDub.stream[0].SetCompression();
16:53:07 VirtualDub.stream[0].EnableFilterGraph(0);
16:53:07 VirtualDub.stream[0].filters.Clear();
16:53:07 VirtualDub.video.DeleteComments(1);
16:53:07 VirtualDub.video.AddComment(0x00000005,"ISFT","Done with AutoMKV! http://forum.doom9.org/showthread.php?t=113811");
16:53:07 VirtualDub.video.AdjustChapters(1);
16:53:07 VirtualDub.video.SetDepth(24,24);
16:53:07 VirtualDub.video.SetMode(0);
16:53:07 VirtualDub.video.SetFrameRate(0,1);
16:53:07 VirtualDub.video.SetIVTC(0,0,-1,0);
16:53:07 VirtualDub.video.SetCompression();
16:53:07 VirtualDub.video.filters.Clear();
16:53:07 VirtualDub.SaveAVI("C:\\Programmi\\PureBasic410\\_test files\\The Kingdom.avi");
16:53:07 VirtualDub.Close();
16:53:07
16:53:07 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -

and i have redone it but reducing to 640x272

16:59:55 0.95 beta2 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
16:59:55 OS Version: Windows XP
16:59:55 Selected Input file: C:\Programmi\PureBasic410\_test files\The Kingdom.mkv
16:59:55 Selected Output dir: C:\Programmi\PureBasic410\_test files\temp\
16:59:55 Selected Final Name: The Kingdom
16:59:55 Selected Container type: AVI
16:59:55 Selected Encoder: XviD
16:59:55 Selected Size: Unlimited File Size
16:59:55 Selected Profile: Constant_Quality.xml
16:59:55 Selected Resizer: SimpleResize (neutral soft) / 640
16:59:55 Selected Filters: RemoveGrain(mode=2)
16:59:55 Selected Deinterlacer: NONE
16:59:55 Selected Field Order: AUTO
16:59:55 Enabled Constant Quality With Unlimited Size (Q 3)
16:59:55 Enabled FFmpegSource
16:59:55 Using Matrix: Didees SixOfNine-HVS.cqm
16:59:55 Track Language 1: The Kingdom.mkv
16:59:55 Audio Codec 1: Copy Original
16:59:55 Track Language 2: NONE
16:59:55 Audio Codec 2: Lame
16:59:55 Selected Unlimited media size
16:59:57 Extracted Audio with FFmpeg!
17:00:00 Size Audio Extracted: 4684800
17:01:31 Aspect ratio: 2.35
17:01:31 Number of Frames: 1404
17:01:31 Framerate: 23.976
17:01:31 Movie length in Seconds: 59
17:01:31 Movie Width/Height: 1920/816
17:01:32 CQ encoding XviD: C:\Programmi\PureBasic410\AutoMKV\exe\encoder\xvid_encraw.exe -cq 3 -max_bframes 2 -imax 31 -quality 6 -vhqmode 1 -qtype 0 -pmax 31 -bmax 31 -bquant_ratio 100 -bquant_offset 0 -nopacked -nochromame -bvhq -threads 0 -par AUTO -qmatrix "C:\Programmi\PureBasic410\AutoMKV\profiles\XviD-profiles\matrix\Didees SixOfNine-HVS.cqm" -i "C:\Programmi\PureBasic410\_test files\temp\movie.avs" -type 2 -avi "C:\Programmi\PureBasic410\_test files\temp\movie.avi"
17:04:23 Accepted values are between 996147 and 1059062 bytes (movie+audio)
17:04:23 Got a file of size: 15301316 bytes + audio size 4684800 bytes (19986116)
17:04:23 Only Movie Size: 15301316 bytes
17:04:23 Using VirtualDubMod for Muxing!
17:04:29 Encoding finished: 00:02:57 elapsed time
17:04:29 -----------------------------------------------------------------------
17:04:29 Script AutoCrop.log
17:04:29
17:04:29 Crop(0,0,1920,816)
17:04:29 -----------------------------------------------------------------------
17:04:29 Script movie.avs
17:04:29
17:04:29 17:04:29 #importstart
17:04:29
17:04:29 #test2
17:04:29
17:04:29 movie = FFmpegSource("C:\Programmi\PureBasic410\_test files\The Kingdom.mkv",vtrack=-1,atrack=-2,seekmode=0,timecodes="Test.timecodes",vcache=true,vcachefile="Test.ffcache")
17:04:29 movie = isRGB(movie) ? ConvertToYV12(movie) : movie
17:04:29 movie = isYUY2(movie) ? ConvertToYV12(movie) : movie
17:04:29 movie = AssumeFPS(movie,24000,1001)
17:04:29 function getOrder(clip c) {
17:04:29 order = GetParity(c) ? 1 : 0
17:04:29 Return order }
17:04:29 #filter1start
17:04:29
17:04:29 #test3
17:04:29
17:04:29 last=movie.Crop(0,0,1920,816)
17:04:29 fixed_aspect = 2.352941
17:04:29 out_width = 640
17:04:29 out_height = 272
17:04:29 #resizestart
17:04:29
17:04:29 #test4
17:04:29
17:04:29 SimpleResize(out_width,out_height)
17:04:29 #filter2start
17:04:29
17:04:29 #test5
17:04:29
17:04:29 RemoveGrain(mode=2)
17:04:29 -----------------------------------------------------------------------
17:04:29 Script VirtualDubMod.vcf
17:04:29
17:04:29 VirtualDub.Open("C:\\Programmi\\PureBasic410\\_test files\\temp\\movie.avi",0,0);
17:04:29 VirtualDub.RemoveInputStreams();
17:04:29 VirtualDub.stream[0].SetSource("C:\\Programmi\\PureBasic410\\_test files\\temp\\audio.ac3",0x00000203,0);
17:04:29 VirtualDub.stream[0].DeleteComments(1);
17:04:29 VirtualDub.stream[0].AdjustChapters(1);
17:04:29 VirtualDub.stream[0].SetMode(0);
17:04:29 VirtualDub.stream[0].SetInterleave(1,500,1,0,0);
17:04:29 VirtualDub.stream[0].SetClipMode(1,1);
17:04:29 VirtualDub.stream[0].SetConversion(0,0,0,0,0);
17:04:29 VirtualDub.stream[0].SetVolume();
17:04:29 VirtualDub.stream[0].SetCompression();
17:04:29 VirtualDub.stream[0].EnableFilterGraph(0);
17:04:29 VirtualDub.stream[0].filters.Clear();
17:04:29 VirtualDub.video.DeleteComments(1);
17:04:29 VirtualDub.video.AddComment(0x00000005,"ISFT","Done with AutoMKV! http://forum.doom9.org/showthread.php?t=113811");
17:04:29 VirtualDub.video.AdjustChapters(1);
17:04:29 VirtualDub.video.SetDepth(24,24);
17:04:29 VirtualDub.video.SetMode(0);
17:04:29 VirtualDub.video.SetFrameRate(0,1);
17:04:29 VirtualDub.video.SetIVTC(0,0,-1,0);
17:04:29 VirtualDub.video.SetCompression();
17:04:29 VirtualDub.video.filters.Clear();
17:04:29 VirtualDub.SaveAVI("C:\\Programmi\\PureBasic410\\_test files\\The Kingdom.avi");
17:04:29 VirtualDub.Close();
17:04:29
17:04:29 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -

BHH

[artisticcheese]

But you did not use FFMpeg.exe anywhere here, right? I'm not familiar with what all this stuff is doing all I know is that in output in both of my cases FFmpeg.exe was given wrong parameters, for example command below will fail becouse -o is not valid parameter. AutoMKV supply wrong parameter to FFMPeg.exe which causing it not to produce movie.avi and error after that.

15:22:23 FFmpeg.exe String: "C:\Program Files\automkv\exe\BeSweet\ffmpeg.exe" -threads 4 -i "C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.mkv" -vcodec libxvid -bf 2 -b 98787000 -s 1920x816 -r 23.976 -o "C:\Program Files\automkv\temp\movie.avi"

[buzzqw]

(always using automkv 0.95 beta2 , with THIS BUILD OF FFFMPEG.EXE http://downloads.sourceforge.net/mplayer-win32/FFmpeg-svn-11050.7z?modtime=1195377594&big_mirror=0)

no, not using ffmpeg

but if i select on ffmpeg encoding "xvid" and on first panel for audio "copy original"

this is the encoding string passed to ffmpeg for the first pass

"C:\Programmi\PureBasic410\AutoMKV\exe\BeSweet\ffmpeg.exe" -threads 2 -i "C:\Programmi\PureBasic410\_test files\The Kingdom.mkv" -vcodec libxvid -b 30000 -cropleft 0 -croptop 0 -cropright 0 -cropbottom 0 -s 640x272 -bf 2 -pass 1 -r 23.976 -acodec libmp3lame -ac 2 -ab 112000 -ar 44100 "C:\Programmi\PureBasic410\_test files\temp\movie.avi"

and this is the second pass
"C:\Programmi\PureBasic410\AutoMKV\exe\BeSweet\ffmpeg.exe" -threads 2 -i "C:\Programmi\PureBasic410\_test files\The Kingdom.mkv" -vcodec libxvid -b 740000 -cropleft 0 -croptop 0 -cropright 0 -cropbottom 0 -s 640x272 -bf 2 -pass 2 -r 23.976 -acodec libmp3lame -ac 2 -ab 112000 -ar 44100 "C:\Programmi\PureBasic410\_test files\temp\movie.avi"

the audio isn't being copied since i forced usage of ffmpeg

BHH

[artisticcheese]

Just made another run, log below. This is with latest of everything. See FFMpeg string output as

C:\Documents and Settings\gregory>"C:\Program Files\automkv\exe\BeSweet\ffmpeg.e
xe" -threads 4 -i "C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ES
iR.sample.mkv" -vcodec libxvid -bf 2 -b 98787000 -s 1920x816 -r 23.976 "C:\down
loads\The.Kingdom\temp\movie.avi"

If I execute it manually it fails with error below. I beleive AutoMKV passes some wrong parameters. What can be the reason for that?

Input #0, matroska, from 'C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.
x264-ESiR.sample.mkv':
Duration: 00:00:58.5, start: 0.000000, bitrate: N/A
Stream #0.0(eng): Video: h264, yuv420p, 1920x816 [PAR 1:1 DAR 40:17], 23.98
tb(r)
Stream #0.1(eng): Audio: liba52, 48000 Hz, 5:1
Stream #0.2(swe): Subtitle: 0x0000
Stream #0.3(fre): Subtitle: 0x0000
Stream #0.4(dan): Subtitle: 0x0000
Stream #0.5(spa): Subtitle: 0x0000
Output #0, avi, to 'C:\downloads\The.Kingdom\temp\movie.avi':
Stream #0.0(eng): Video: libxvid, yuv420p, 1920x816 [PAR 1:1 DAR 40:17], q=2
-31, 98787 kb/s, 23.98 tb(c)
Stream #0.1(eng): Audio: mp2, 48000 Hz, 5:1, 64 kb/s
Stream mapping:
Stream #0.0 -> #0.0
Stream #0.1 -> #0.1
[mp2 @ 00A50410]encoding 6 channel(s) is not allowed in mp2
Error while opening codec for output stream #0.1 - maybe incorrect parameters su
ch as bit_rate, rate, width or height

C:\Documents and Settings\gregory>



12:22:09 0.95 beta2 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
12:22:09 OS Version: Windows Server 2003
12:22:09 Selected Input file: C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.mkv
12:22:09 Selected Output dir: C:\downloads\The.Kingdom\temp\
12:22:09 Selected Final Name: The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample
12:22:09 Selected Container type: AVI
12:22:09 Selected Encoder: XviD
12:22:09 Selected Size: Unlimited File Size
12:22:09 Selected Profile: Constant_Quality.xml
12:22:09 Selected Resizer: NONE / Original
12:22:09 Selected Filters: RemoveGrain(mode=2)
12:22:09 Selected Deinterlacer: AUTO
12:22:09 Selected Field Order: AUTO
12:22:09 NeroAACEnc.exe: not present
12:22:09 Enabled Constant Quality With Unlimited Size (Q 2)
12:22:09 Enabled FFmpegSource
12:22:09 Using Matrix: Didees SixOfNine-HVS.cqm
12:22:09 Track Language 1: The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.mkv
12:22:09 Audio Codec 1: Copy Original
12:22:09 Track Language 2: NONE
12:22:09 Audio Codec 2: Lame
12:22:09 Selected Unlimited media size
12:22:10 Extracted Audio with FFmpeg!
12:22:11 Size Audio Extracted: 4684800
12:23:18 Aspect ratio: 2.35
12:23:18 Number of Frames: 1404
12:23:18 Framerate: 23.976
12:23:18 Movie length in Seconds: 59
12:23:18 Movie Width/Height: 1920/816
12:26:16 Source is declared tff by a margin of 1/0.
12:26:16 Advanced Deinterlace Routines Log
12:26:16 Analyzed 837 sections of five frames
12:26:16 Found Interlace Sections: 0 0.00%
12:26:16 Found Progressive Sections:837 100.00%
12:26:16 Found Telecined Sections: 0 0.00%
12:26:16 Found Zero Mov: 100.00% 837
12:26:16 Found One Mov: 0.00% 0
12:26:16 Found Two Mov: 0.00% 0
12:26:16 Found Three Mov: 0.00% 0
12:26:16 Found Four Mov: 0.00% 0
12:26:16 Found Five Mov: 0.00% 0
12:26:16 The Movie is declared to progressive
12:26:16 CQ encoding XviD: C:\Program Files\automkv\exe\encoder\xvid_encraw.exe -cq 2 -max_bframes 2 -imax 31 -quality 6 -vhqmode 1 -qtype 0 -pmax 31 -bmax 31 -bquant_ratio 100 -bquant_offset 0 -nopacked -nochromame -bvhq -threads 0 -par AUTO -qmatrix "C:\Program Files\automkv\profiles\XviD-profiles\matrix\Didees SixOfNine-HVS.cqm" -i "C:\downloads\The.Kingdom\temp\movie.avs" -type 2 -avi "C:\downloads\The.Kingdom\temp\movie.avi"
12:26:19 Accepted values are between 697303040 and 741343232 bytes (movie+audio)
12:26:19 Got a file of size: -1 bytes + audio size 4684800 bytes (4684799)
12:26:20 BREAK ! FILE NOT SUPPORTED ! LAST TRY WITH FFMPEG!
12:26:20 Switched to FFmpeg for Video Encoding!
12:26:20 FFmpeg.exe String: "C:\Program Files\automkv\exe\BeSweet\ffmpeg.exe" -threads 4 -i "C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.mkv" -vcodec libxvid -bf 2 -b 98787000 -s 1920x816 -r 23.976 "C:\downloads\The.Kingdom\temp\movie.avi"
12:26:22 Fished FFmpeg Encoding!
12:26:22 Using VirtualDubMod for Muxing!
12:26:24 Encoding finished: 00:00:08 elapsed time
12:26:24 -----------------------------------------------------------------------
12:26:24 Script AutoCrop.log
12:26:24
12:26:24 Crop(0,0,1920,816)
12:26:24 -----------------------------------------------------------------------
12:26:24 Script movie.avs
12:26:24
12:26:24 LoadPlugin("C:\Program Files\automkv\exe\filter\AddGrain.dll")
12:26:24 LoadPlugin("C:\Program Files\automkv\exe\filter\autocrop.dll")
12:26:24 LoadPlugin("C:\Program Files\automkv\exe\filter\aWarpSharp(Pruned).dll")
12:26:24 LoadPlugin("C:\Program Files\automkv\exe\filter\blockbuster.dll")
12:26:24 LoadPlugin("C:\Program Files\automkv\exe\filter\cnr2.dll")
12:26:24 LoadPlugin("C:\Program Files\automkv\exe\filter\ColorMatrix.dll")
12:26:24 LoadPlugin("C:\Program Files\automkv\exe\filter\Convolution3D.dll")
12:26:24 LoadPlugin("C:\Program Files\automkv\exe\filter\corrector.dll")
12:26:24 LoadPlugin("C:\Program Files\automkv\exe\filter\DctFilter.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\Decomb.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\Deen.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\degrainmedian.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\DGDecode.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\EEDI2.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\FFMpegSource.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\FFT3DFilter.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\FluxSmooth.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\frfun7.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\hqdn3d.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\LeakKernelDeint.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\MaskTools.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\medianblur.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\MipSmooth.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\MSharpen.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\mt_masktools.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\mvtools.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\NicAudio.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\RemoveGrainS.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\RepairS.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\SangNom.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\SimpleResize.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\SoundOut.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\TBilateral.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\TDeint.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\TIVTC.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\TomsMoComp.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\TTempSmooth.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\UnDot.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\UnFilter.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\VSFilter.dll")
12:26:25 LoadPlugin("C:\Program Files\automkv\exe\filter\warpsharp.dll")
12:26:25 #loadpluginstart
12:26:25
12:26:25 #test1
12:26:25
12:26:25 Import("C:\Program Files\automkv\exe\filter\BlindDeHalo3_mt2.avsi")
12:26:25 Import("C:\Program Files\automkv\exe\filter\Deblock_QED_MT2.avsi")
12:26:25 Import("C:\Program Files\automkv\exe\filter\FastLineDarken 1.3 MT MOD.avsi")
12:26:25 Import("C:\Program Files\automkv\exe\filter\HybridFuPP.avsi")
12:26:25 Import("C:\Program Files\automkv\exe\filter\LanczosPlus.avsi")
12:26:25 Import("C:\Program Files\automkv\exe\filter\Lem.avsi")
12:26:25 Import("C:\Program Files\automkv\exe\filter\LimitedSharpenFaster.avsi")
12:26:25 Import("C:\Program Files\automkv\exe\filter\MCBob_v03c.avsi")
12:26:25 Import("C:\Program Files\automkv\exe\filter\mvbob.avsi")
12:26:25 Import("C:\Program Files\automkv\exe\filter\QMlib.avsi")
12:26:25 Import("C:\Program Files\automkv\exe\filter\seesaw.avsi")
12:26:25 Import("C:\Program Files\automkv\exe\filter\spresso.avsi")
12:26:25 #importstart
12:26:25
12:26:25 #test2
12:26:25
12:26:25 movie = FFmpegSource("C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.mkv",vtrack=-1,atrack=-2,seekmode=0,timecodes="Test.timecodes",vcache=true,vcachefile="Test.ffcache")
12:26:25 movie = isRGB(movie) ? ConvertToYV12(movie) : movie
12:26:25 movie = isYUY2(movie) ? ConvertToYV12(movie) : movie
12:26:25 movie = AssumeFPS(movie,24000,1001)
12:26:25 function getOrder(clip c) {
12:26:25 order = GetParity(c) ? 1 : 0
12:26:25 Return order }
12:26:25 #filter1start
12:26:25
12:26:25 #test3
12:26:25
12:26:25 last = movie
12:26:25 fixed_aspect = 2.352941
12:26:25 out_width = 1920
12:26:25 out_height = 816
12:26:25 #resizestart
12:26:25
12:26:26 #test4
12:26:26
12:26:26 #filter2start
12:26:26
12:26:26 #test5
12:26:26
12:26:26 RemoveGrain(mode=2)
12:26:26 -----------------------------------------------------------------------
12:26:26 Script VirtualDubMod.vcf
12:26:26
12:26:26 VirtualDub.Open("C:\\downloads\\The.Kingdom\\temp\\movie.avi",0,0);
12:26:26 VirtualDub.RemoveInputStreams();
12:26:26 VirtualDub.stream[0].SetSource("C:\\downloads\\The.Kingdom\\temp\\audio.ac3",0x00000203,0);
12:26:26 VirtualDub.stream[0].DeleteComments(1);
12:26:26 VirtualDub.stream[0].AdjustChapters(1);
12:26:26 VirtualDub.stream[0].SetMode(0);
12:26:26 VirtualDub.stream[0].SetInterleave(1,500,1,0,0);
12:26:26 VirtualDub.stream[0].SetClipMode(1,1);
12:26:26 VirtualDub.stream[0].SetConversion(0,0,0,0,0);
12:26:26 VirtualDub.stream[0].SetVolume();
12:26:26 VirtualDub.stream[0].SetCompression();
12:26:26 VirtualDub.stream[0].EnableFilterGraph(0);
12:26:26 VirtualDub.stream[0].filters.Clear();
12:26:26 VirtualDub.video.DeleteComments(1);
12:26:26 VirtualDub.video.AddComment(0x00000005,"ISFT","Done with AutoMKV! http://forum.doom9.org/showthread.php?t=113811");
12:26:26 VirtualDub.video.AdjustChapters(1);
12:26:26 VirtualDub.video.SetDepth(24,24);
12:26:26 VirtualDub.video.SetMode(0);
12:26:26 VirtualDub.video.SetFrameRate(0,1);
12:26:26 VirtualDub.video.SetIVTC(0,0,-1,0);
12:26:26 VirtualDub.video.SetCompression();
12:26:26 VirtualDub.video.filters.Clear();
12:26:26 VirtualDub.SaveAVI("C:\\downloads\\The.Kingdom\\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.avi");
12:26:26 VirtualDub.Close();
12:26:26
12:26:26 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -

[buzzqw]

C:\Documents and Settings\gregory>"C:\Program Files\automkv\exe\BeSweet\ffmpeg.e
xe" -threads 4 -i "C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ES
iR.sample.mkv" -vcodec libxvid -bf 2 -b 98787000 -s 1920x816 -r 23.976 "C:\down
loads\The.Kingdom\temp\movie.avi"

the problem is audio..
[mp2 @ 00A50410]encoding 6 channel(s) is not allowed in mp2

i forced NO audio in next build but now launch this

C:\Program Files\automkv\exe\BeSweet\ffmpeg.exe" -an -threads 4 -i "c:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.mkv" -vcodec libxvid -bf 2 -b 98787000 -s 1920x816 -r 23.976 "C:\downloads\The.Kingdom\temp\movie.avi"

then mux the video file movie.avi with audio.ac3 already extracted

BHH

[artisticcheese]

I'd rather wait for complete solution then do this command line stuff.
So in next build I would be able to use AutoMKV to convert to XVID while preserving original audio using FFMPeg?
How can I find out why DirectShow fails on my system, so I would not have to use FFMpeg.

[delacroixp]

It's easier to read and understand your post if you include CODE tags.


Just made another run, log below. This is with latest of everything. See FFMpeg string output as

C:\Documents and Settings\gregory> "C:\Program Files\automkv\exe\BeSweet\ffmpeg.exe" -threads 4 - i "C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.mkv" -vcodec libxvid -bf 2 -b 98787000 -s 1920x816 -r 23.976 "C:\downloads\The.Kingdom\temp\movie.avi"


If I execute it manually it fails with error below. I beleive AutoMKV passes some wrong parameters. What can be the reason for that?

Input #0, matroska, from 'C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.mkv':
Duration: 00:00:58.5, start: 0.000000, bitrate: N/A Stream #0.0(eng): Video: h264, yuv420p, 1920x816 [PAR 1:1 DAR 40:17], 23.98 tb(r)
Stream #0.1(eng): Audio: liba52, 48000 Hz, 5:1
Stream #0.2(swe): Subtitle: 0x0000
Stream #0.3(fre): Subtitle: 0x0000
Stream #0.4(dan): Subtitle: 0x0000
Stream #0.5(spa): Subtitle: 0x0000
Output #0, avi, to 'C:\downloads\The.Kingdom\temp\movie.avi':
Stream #0.0(eng): Video: libxvid, yuv420p, 1920x816 [PAR 1:1 DAR 40:17], q=2-31, 98787 kb/s, 23.98 tb(c)
Stream #0.1(eng): Audio: mp2, 48000 Hz, 5:1, 64 kb/s
Stream mapping:
Stream #0.0 -> #0.0
Stream #0.1 -> #0.1
[mp2 @ 00A50410]encoding 6 channel(s) is not allowed in mp2 Error while opening codec for output stream #0.1 - maybe incorrect parameters such as bit_rate, rate, width or height]

C:\Documents and Settings\gregory>



:):devil::D
Pascal

[artisticcheese]

This made my screen to scroll horizontally since there is no wrapping, how this make it's more readable?

[delacroixp]

This made my screen to scroll horizontally since there is no wrapping, how this make it's more readable?

Indentation/layout is maintained and the 'sequence of events' or the 'overall scope of the program execution' is more easily understood... even if you need to scroll to the right to read one or two lines.
I guess it's a programming thing... layout, whitespace and meaningfull variables can do more for a programme than tagging one command after another eventhough it makes no difference to a computer (spagetti code (http://www.urbandictionary.com/define.php?term=spaghetti+code)).
It's easier to read and understand a book with proper paragraphs, layout and punctuation !


:):devil::D
Pascal

[Encoder888]

@Encoder888
my bad. i have fixed this issues, the constant quality profile is indipendent from specify quality options.
The "specify quality" trigger crf encoding only for 1 pass or 2 pass encoding. :o

Okay, that's great, it actually makes more sense this way. Just out of curiosity, did that get fixed in 0.93a or 0.93 ? I know it's a strange question, but I'd like to know (long story), please let me know if possible ;))

Thx & keep up the good work.

[Raven_]

Is there any good tutorial out there for AutoMKV?

I'm encoding some HD content into H.264 and would like to know more details on the different quality profiles and encoding times such as 2 pass balanced, 2 pass better quality, 2 pass extreme, insane, etc.

I also have some 2:35 anamorphic HD content and wanted to know if its possible to re-encode to non-anamorphic 16:9 and will this cause aspect ratio issues? AutoMKV says its a MOD16 resize.

Also, is there a way to tell autoMKV I would only like to encode the first 2 mins of the movie so I can then check the result and quality without having to wait 5-10 hours each time :(

Thanks

[TheResidentEvil]

Check this out for some help raven.

http://automkv.a.wiki-site.com/index.php/Help:Contents

Anyone know which filter would work best with a sports game. I was looking at MipSmooth(movieHQ2). I know it is a matter of opinion, but which ones should I be focusing on. Also interested in which resizefilter to pick. How do you determine which filters you should be using? I guess it is based on the content so my content is a 720p or 1080i ts of a football game.

[jamos]

It's easier to read and understand your post if you include CODE tags.





:):devil::D
Pascal

Looks like the command line is not converting the audio from 6 channel (which is what it probably is) to 2 channel.

[valnar]

Anyone know which filter would work best with a sports game. I was looking at MipSmooth(movieHQ2). I know it is a matter of opinion, but which ones should I be focusing on. Also interested in which resizefilter to pick. How do you determine which filters you should be using?

I second this request. I realize everything included is AVISynth filters, but is there a FAQ somewhere on all the pros and cons of each?

-Robert

[hw360]

I've been using AutoMKV to convert big .mkv video to smaller .mkv video for PDA playing.
I usually burn subtitle (the subtitle is embended as a text stream in source .mkv file), it worked very well. However, today it stops working. The subtitle is not burned into the final video (I did check 'burn subtitle' in advanced settings tab), although the source file plays fine with subtitle (MPC with CCCP codecs).
I guess I messed up some directshow filter settings. Does anyone know how to make 'burn subtitle' works? Many thanks.

[spotter]

There's still one thing I don't know how to do with automkv.

Let's say I have a 16:9 film

If I say encode anamorphic, original size, I end up with a 853x480 encode. With no black bars, as it's the full image size. This is also the size of the dvd if played in mplayerc.

Now let's say I have a 2.35:1 film.

This is going to have black bars in the film. If I encode it anamorphic, original size, I end up with the same 853x480 encode, but it's encoding black bars.

So, I say, "autocrop". I don't want it to resize, but automkv seems to insist on doing that (to try and maintain AR I think). I end up with something larger than 853 wide (though less than 480 high, which makes sense as it cropped some).

All I want to do is auto crop the black bars, encode it at the normal 853 width, no resizing has to be done and no futzing around with AR as 853 x (480 - cropping, or around 360+ on average) is what I want. However, if I try to crop manually, automkv insists on a mode 2, 4, 8... divisor, which doesn't let me get the 853 width and it seems to want to insist on using a resizing filter.

Shouldn't this cropping be simple to do? why can't I figure it out?

[nx6]

Hello. I just thought I'd pop in and mention this:

I did an encode a couple days ago with the current version. The source was a pre-ripped DVD on my HD, and the output was x264+AAC+external subs in an MKV. The muxing failed to run, and after looking things over I realized the muxing batch file was looking for an audio track called "audio.mp3", which of course since I'd used the Nero AAC encoder for audio the file was actually "audio.mp4".

I fixed the batch file and the finished movie came out fine. But I thought that might interest you, buzzq.

[buzzqw]

@Encoder888

the fix is in 0.93 (iirc.... )

@Raven_
Also, is there a way to tell autoMKV I would only like to encode the first 2 mins of the movie so I can then check the result and quality without having to wait 5-10 hours each time

in advanced settings, on last avs script, write
trim(0,7500) for first 5 minutes

@TheResidentEvil

try TTempSmooth()

@hw360
use the "Burn Subtitile" for permanent print of subs on movie

@spotter
try with 0.95 beta 2

. However, if I try to crop manually, automkv insists on a mode 2, 4, 8... divisor, which doesn't let me get the 853
use "Force Mux" option

@nx6
maybe encoding audio falied and automkv trigger the ffmpeg encoding

BHH

[hw360]

@buzzqw,

I did check 'burn subtitle' in advanced settings tab.

[artisticcheese]

Buzz,

When issue with inability to copy original audio while using FFMpeg be fixed? I can not use AutoMKV for last month becouse of that and there are no other tools which will allow me to copy original audio and convert MKV to DivX.

[buzzqw]

@artisticcheese

fixed in automkv 0.95 beta2
16:30:07 0.95 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
16:30:07 OS Version: Windows Server 2003
16:30:07 Selected Input file: C:\Programmi\PureBasic410\_test files\51ac3.mkv
16:30:07 Selected Output dir: C:\Programmi\PureBasic410\_test files\temp\
16:30:07 Selected Final Name: test222
16:30:07 Selected Container type: AVI
16:30:07 Selected Encoder: XviD
16:30:07 Selected Size: 2 / 1
16:30:07 Selected Profile: 1_Pass_Fastest.xml
16:30:07 Selected Resizer: SimpleResize (neutral soft) / 640
16:30:07 Selected Filters: RemoveGrain(mode=2)
16:30:07 Selected Deinterlacer: NONE
16:30:07 Selected Field Order: AUTO
16:30:07 Using Matrix: Didees SixOfNine.cqm
16:30:07 Track Language 1: 51ac3.mkv
16:30:07 Audio Codec 1: Copy Original
16:30:07 Track Language 2: NONE
16:30:07 Audio Codec 2: Lame
16:30:07
16:30:11 Unable to determine movie proprierties , switched to DirectShowSource
16:30:15 Number of Frames: 315
16:30:15 Framerate: 25.000000
16:30:15 Movie length in Seconds: 13
16:30:15 Movie Width/Height: 640/272
16:30:15 Number of Frames: 315
16:30:15 Framerate: 25.000000
16:30:15 Movie length in Seconds: 13
16:30:15 Movie Width/Height: 640/272
16:30:15 Extracted Audio with FFmpeg!
16:30:16 Size Audio Extracted: 595968
16:30:16 Single Pass Encoding XviD: "C:\Programmi\PureBasic410\AutoMKV\exe\encoder\xvid_encraw.exe" -single -bitrate 918 -max_bframes 0 -imax 16 -qpel -quality 4 -vhqmode 0 -pmax 16 -bmax 16 -bquant_ratio 100 -bquant_offset 0 -ostrength 0 -nopacked -nochromame -threads 0 -par AUTO -qmatrix "C:\Programmi\PureBasic410\AutoMKV\profiles\XviD-profiles\matrix\Didees SixOfNine.cqm" -i "C:\Programmi\PureBasic410\_test files\temp\movie.avs" -type 2 -avi "C:\Programmi\PureBasic410\_test files\temp\movie.avi"
16:30:27 Only Movie Size: 1433696 bytes
16:30:28 BREAK ! FILE NOT SUPPORTED ! LAST TRY WITH FFMPEG!
16:30:28 Switched to FFmpeg for Video Encoding!
16:30:28 FFmpeg.exe String: "C:\Programmi\PureBasic410\AutoMKV\exe\BeSweet\ffmpeg.exe" -an -threads 2 -i "C:\Programmi\PureBasic410\_test files\51ac3.mkv" -vcodec libxvid -bf 2 -b 918000 -cropleft 0 -croptop 0 -cropright 0 -cropbottom 0 -s 640x272 -r 25.000 "C:\Programmi\PureBasic410\_test files\temp\movie.avi"
16:30:35 Fished FFmpeg Encoding!
16:30:35 Using VirtualDubMod for Muxing!
16:30:37 Encoding finished: 00:00:21 elapsed time
16:30:37 -----------------------------------------------------------------------
16:30:37 Script AutoCrop.log
16:30:37
16:30:37 Crop(0,0,640,272)
16:30:37 -----------------------------------------------------------------------
16:30:37 Script movie.avs
16:30:37
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\AddGrain.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\autocrop.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\aWarpSharp(Pruned).dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\blockbuster.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\cnr2.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\ColorMatrix.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\Convolution3D.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\corrector.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\DctFilter.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\Decomb.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\Deen.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\degrainmedian.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\DGDecode.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\EEDI2.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\FFMpegSource.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\FFT3DFilter.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\FluxSmooth.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\frfun7.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\hqdn3d.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\LeakKernelDeint.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\MaskTools.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\medianblur.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\MipSmooth.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\MSharpen.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\mt_masktools.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\mvtools.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\NicAudio.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\RemoveGrainS.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\RepairS.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\SangNom.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\SimpleResize.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\SoundOut.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\TBilateral.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\TDeint.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\TIVTC.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\TomsMoComp.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\TTempSmooth.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\UnDot.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\UnFilter.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\VSFilter.dll")
16:30:37 LoadPlugin("C:\Programmi\PureBasic410\AutoMKV\exe\filter\warpsharp.dll")
16:30:37 #loadpluginstart
16:30:37
16:30:37 #test1
16:30:37
16:30:37 Import("C:\Programmi\PureBasic410\AutoMKV\exe\filter\BlindDeHalo3_mt2.avsi")
16:30:37 Import("C:\Programmi\PureBasic410\AutoMKV\exe\filter\Deblock_QED_MT2.avsi")
16:30:37 Import("C:\Programmi\PureBasic410\AutoMKV\exe\filter\FastLineDarken 1.3 MT MOD.avsi")
16:30:37 Import("C:\Programmi\PureBasic410\AutoMKV\exe\filter\HybridFuPP.avsi")
16:30:37 Import("C:\Programmi\PureBasic410\AutoMKV\exe\filter\LanczosPlus.avsi")
16:30:37 Import("C:\Programmi\PureBasic410\AutoMKV\exe\filter\Lem.avsi")
16:30:37 Import("C:\Programmi\PureBasic410\AutoMKV\exe\filter\LimitedSharpenFaster.avsi")
16:30:37 Import("C:\Programmi\PureBasic410\AutoMKV\exe\filter\MCBob_v03c.avsi")
16:30:37 Import("C:\Programmi\PureBasic410\AutoMKV\exe\filter\mvbob.avsi")
16:30:37 Import("C:\Programmi\PureBasic410\AutoMKV\exe\filter\QMlib.avsi")
16:30:37 Import("C:\Programmi\PureBasic410\AutoMKV\exe\filter\seesaw.avsi")
16:30:37 Import("C:\Programmi\PureBasic410\AutoMKV\exe\filter\spresso.avsi")
16:30:37 #importstart
16:30:37
16:30:37 #test2
16:30:37
16:30:37 movie = directshowsource("C:\Programmi\PureBasic410\_test files\51ac3.mkv",fps=25.000000,convertfps=true,audio=false)
16:30:37 movie = isRGB(movie) ? ConvertToYV12(movie,interlaced=true) : movie
16:30:37 movie = isYUY2(movie) ? ConvertToYV12(movie,interlaced=true) : movie
16:30:37 function getOrder(clip c) {
16:30:37 order = GetParity(c) ? 1 : 0
16:30:37 Return order }
16:30:37 #filter1start
16:30:37
16:30:37 #test3
16:30:37
16:30:37 last=movie.Crop(0,0,640,272)
16:30:37 fixed_aspect = 1.777700
16:30:37 out_width = 640
16:30:37 out_height = 368
16:30:37 #resizestart
16:30:37
16:30:37 #test4
16:30:37
16:30:37 SimpleResize(out_width,out_height)
16:30:37 #filter2start
16:30:37
16:30:37 #test5
16:30:37
16:30:37 RemoveGrain(mode=2)
16:30:37 -----------------------------------------------------------------------
16:30:37 Script VirtualDubMod.vcf
16:30:37
16:30:37 VirtualDub.Open("C:\\Programmi\\PureBasic410\\_test files\\temp\\movie.avi",0,0);
16:30:37 VirtualDub.RemoveInputStreams();
16:30:37 VirtualDub.stream[0].SetSource("C:\\Programmi\\PureBasic410\\_test files\\temp\\audio.ac3",0x00000203,0);
16:30:37 VirtualDub.stream[0].DeleteComments(1);
16:30:37 VirtualDub.stream[0].AdjustChapters(1);
16:30:37 VirtualDub.stream[0].SetMode(0);
16:30:37 VirtualDub.stream[0].SetInterleave(1,500,1,0,0);
16:30:37 VirtualDub.stream[0].SetClipMode(1,1);
16:30:37 VirtualDub.stream[0].SetConversion(0,0,0,0,0);
16:30:37 VirtualDub.stream[0].SetVolume();
16:30:37 VirtualDub.stream[0].SetCompression();
16:30:37 VirtualDub.stream[0].EnableFilterGraph(0);
16:30:37 VirtualDub.stream[0].filters.Clear();
16:30:37 VirtualDub.video.DeleteComments(1);
16:30:37 VirtualDub.video.AddComment(0x00000005,"ISFT","Done with AutoMKV! http://forum.doom9.org/showthread.php?t=113811");
16:30:37 VirtualDub.video.AdjustChapters(1);
16:30:37 VirtualDub.video.SetDepth(24,24);
16:30:37 VirtualDub.video.SetMode(0);
16:30:37 VirtualDub.video.SetFrameRate(0,1);
16:30:37 VirtualDub.video.SetIVTC(0,0,-1,0);
16:30:37 VirtualDub.video.SetCompression();
16:30:37 VirtualDub.video.filters.Clear();
16:30:37 VirtualDub.SaveAVI("C:\\Programmi\\PureBasic410\\_test files\\test222.avi");
16:30:37 VirtualDub.Close();
16:30:37
16:30:37 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -

BHH

[artisticcheese]

Where I can download Beta 2?

[buzzqw]

here http://forum.doom9.org/showthread.php?t=133509

BHH

[RNiK]

Where I can download Beta 2?
Look here (http://forum.doom9.org/showthread.php?t=133509). ;)

EDIT: buzzqw already answered. :p

[artisticcheese]

Yep, that did it, thanks.

[buzzqw]

sweet :)

BHH

[weaver4]

Hey gang. Be very careful with filenames. AutoMKV does not like filenames with a bunch of periods in it like:

The.Kingdom.2007.1080p.HDDVD.x264-ESiR.sample.avi

Try

The-Kingdom-2007-1080p-HDDVD-x264-ESiR-sample.avi

[Raven_]

@Raven_


in advanced settings, on last avs script, write
trim(0,7500) for first 5 minutes



Thanks so much!!!!!!!!!!! this a HUGE time savings for me. Again, AutoMKV is amazing. thanks!

[Honeyko]

BUG: Speaking of Force Mux, entered values are not retained with a Save Setting.

[artisticcheese]

sweet :)

BHH

Now if you can extract subtitles from MKV and burn them into AVI I'll have everything I need in 1 package.

[red5goahead]

Is it Auto MKV x264 video stream compliant to this interesting thread?

x264 Encoding Options for Hardware Compatibility & DXVA
http://www.avsforum.com/avs-vb/showthread.php?t=972503

Often in avmagazine.it forum we talk about poor compatibility of mkv avc1/x264 files and new card Ati 2x000,3x000 and nvidia.
Could be usefull a clear reference in AutoMKV for this. An option like "Make compliant to Ati,Nvidia DirectX Video Acceleration"

[valnar]

Is it Auto MKV x264 video stream compliant to this interesting thread?

x264 Encoding Options for Hardware Compatibility & DXVA
http://www.avsforum.com/avs-vb/showthread.php?t=972503

Often in avmagazine.it forum we talk about poor compatibility of mkv avc1/x264 files and new card Ati 2x000,3x000 and nvidia.
Could be usefull a clear reference in AutoMKV for this. An option like "Make compliant to Ati,Nvidia DirectX Video Acceleration"

There is another thread on Doom9 which echoes the same thing. All we need in AutoMKV (just like megui) is profiles which depict the recommended settings.

I've already made my own for AutoMKV.

Robert

[bigggt]

Hi all

I was looking for a way to play videos on my ps3 or xbox 360 and this tool and handbrake seem to be pretty popular

i don't know very much about this stuff but my encodes keep getting hung up on the nero aac conversion box

i downloaded the neroaacenc.exe and placed it in the proper folder

here is the log

18:59:24 0.93 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
18:59:24 OS Version: Windows XP
18:59:24 Selected Input file: C:\Temp\test.avi
18:59:24 Selected Output dir: C:\Temp\AutoMKV\temp\
18:59:24 Selected Final Name: test
18:59:24 Selected Container type: MP4
18:59:24 Selected Encoder: X264
18:59:24 Selected Size: 1 CD / 1
18:59:24 Selected Profile: PS3_41.xml
18:59:24 Selected Resizer: SimpleResize (neutral soft) / Automatic
18:59:24 Selected Filters: RemoveGrain(mode=2)
18:59:24 Selected Deinterlacer: AUTO
18:59:24 Selected Field Order: AUTO
18:59:24 Track Language 1: test.avi
18:59:24 Audio Codec 1: Nero AAC
18:59:24 Audio Quality 1: 0.35
18:59:24 Audio Channel 1: Stereo
18:59:24 Track Language 2: NONE
18:59:24 Audio Codec 2: Nero AAC
18:59:24 Advanced Audio Settings DUMP Track 1
18:59:24 Nero Option Profiles: AUTO --- Encoding Mode: Quality
18:59:24 CCT Option Profiles: AUTO --- Channel Options: AUTO
18:59:24 Lame Settings: ABR
18:59:24 Audio Normalization: 1
18:59:24 Frequency: AUTO --- Tempo: NONE --- Pitch: NONE --- Other Add:
18:59:24
18:59:28 Avi engage mode not corrected, switched to DirectShowSource
18:59:36 Number of Frames: 3357
18:59:36 Framerate: 25.000000
18:59:36 Movie length in Seconds: 135
18:59:36 Movie Width/Height: 720/296
18:59:36 Number of Frames: 3357
18:59:36 Framerate: 25.000000
18:59:36 Movie length in Seconds: 135
18:59:36 Movie Width/Height: 720/296
19:00:06 Source is declared bff by a margin of 2/1.
19:00:06 Advanced Deinterlace Routines Log
19:00:06 Analyzed 484 sections of five frames
19:00:06 Found Interlace Sections: 0 0.00%
19:00:06 Found Progressive Sections:484 100.00%
19:00:06 Found Telecined Sections: 0 0.00%
19:00:06 Found Zero Mov: 100.00% 484
19:00:06 Found One Mov: 0.00% 0
19:00:06 Found Two Mov: 0.00% 0
19:00:06 Found Three Mov: 0.00% 0
19:00:06 Found Four Mov: 0.00% 0
19:00:06 Found Five Mov: 0.00% 0
19:00:06 The Movie is declared to progressive
19:00:06 Encoding C:\Temp\AutoMKV\temp\ to NeroAAC with 0.35 quality

the file ia avi with ac3

any ideas waht i am doing wrong

thanks

[delacroixp]

Also, is there a way to tell autoMKV I would only like to encode the first 2 mins of the movie so I can then check the result and quality without having to wait 5-10 hours each time :(
in advanced settings, on last avs script, write
trim(0,7500) for first 5 minutes


Alternatively... if you want total control of your choice of encoding section/segment (intro's can be misleading at times)... consider loading the file directly into DGIndex (AutoMKV095\exe\DGIndex\DGIndex.exe).
Select the section ([...]) of your choice...

Save project... and then load the d2v file into AutoMKV (skipping audio if you so prefer).


:):devil::D
Pascal

[artisticcheese]

Hi,

Log is below, I'm converting x264 MKV to DivX AVI with constant quality setting and I got 1,5 GB AVI file out of 9 GB original MKV file while usually I was getting the same size of output and input files.

What can be causing this? Resultant file is 1.2 Mbps, 1920x816


10:15:43 0.95 beta 2 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
10:15:43 OS Version: Windows Server 2003
10:15:43 Selected Input file: C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.mkv
10:15:43 Selected Output dir: D:\rip\temp\
10:15:43 Selected Final Name: The.Kingdom
10:15:43 Selected Container type: AVI
10:15:43 Selected Encoder: XviD
10:15:43 Selected Size: Unlimited File Size
10:15:43 Selected Profile: Constant_Quality.xml
10:15:43 Selected Resizer: NONE / Original
10:15:43 Selected Filters: RemoveGrain(mode=2)
10:15:43 Selected Deinterlacer: AUTO
10:15:43 Selected Field Order: AUTO
10:15:43 NeroAACEnc.exe: not present
10:15:43 Enabled Constant Quality With Unlimited Size (Q 2)
10:15:44 Using Matrix: Didees SixOfNine-HVS.cqm
10:15:44 Track Language 1: The.Kingdom.2007.1080p.HDDVD.x264-ESiR.mkv
10:15:44 Audio Codec 1: Copy Original
10:15:44 Track Language 2: NONE
10:15:44 Audio Codec 2: Lame
10:15:44 Selected Unlimited media size
10:15:48 Unable to determine movie proprierties , switched to DirectShowSource
10:17:16 Number of Frames: 158722
10:17:16 Framerate: 23.976044
10:17:16 Movie length in Seconds: 6621
10:17:16 Movie Width/Height: 1920/816
10:17:16 Number of Frames: 158722
10:17:16 Framerate: 23.976044
10:17:16 Movie length in Seconds: 6621
10:17:16 Movie Width/Height: 1920/816
12:41:32 Source is declared tff by a margin of 107/78.
12:41:32 Advanced Deinterlace Routines Log
12:41:32 Analyzed 828 sections of five frames
12:41:32 Found Interlace Sections: 0 0.00%
12:41:32 Found Progressive Sections:828 100.00%
12:41:32 Found Telecined Sections: 0 0.00%
12:41:32 Found Zero Mov: 100.00% 828
12:41:32 Found One Mov: 0.00% 0
12:41:32 Found Two Mov: 0.00% 0
12:41:32 Found Three Mov: 0.00% 0
12:41:32 Found Four Mov: 0.00% 0
12:41:32 Found Five Mov: 0.00% 0
12:41:32 The Movie is declared to progressive
12:41:32 Extracted Audio with FFmpeg!
12:45:20 Size Audio Extracted: 529615360
12:45:20 CQ encoding XviD: C:\Program Files\automkv\exe\encoder\xvid_encraw.exe -cq 2 -max_bframes 2 -imax 31 -quality 6 -vhqmode 1 -qtype 0 -pmax 31 -bmax 31 -bquant_ratio 100 -bquant_offset 0 -nopacked -nochromame -bvhq -threads 0 -par AUTO -qmatrix "C:\Program Files\automkv\profiles\XviD-profiles\matrix\Didees SixOfNine-HVS.cqm" -i "D:\rip\temp\movie.avs" -type 2 -avi "D:\rip\temp\movie.avi"
12:45:23 Accepted values are between 697303040 and 741343232 bytes (movie+audio)
12:45:23 Got a file of size: -1 bytes + audio size 529615360 bytes (529615360)
12:45:24 BREAK ! FILE NOT SUPPORTED ! LAST TRY WITH FFMPEG!
12:45:24 Switched to FFmpeg for Video Encoding!
12:45:24 FFmpeg.exe String: "C:\Program Files\automkv\exe\BeSweet\ffmpeg.exe" -an -threads 4 -i "C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.mkv" -vcodec libxvid -bf 2 -b 242000 -s 1920x816 -r 23.976 "D:\rip\temp\movie.avi"
23:00:26 Fished FFmpeg Encoding!
23:00:26 Using VirtualDubMod for Muxing!
23:03:55 Encoding finished: 10:18:35 elapsed time
23:03:55 -----------------------------------------------------------------------
23:03:55 Script AutoCrop.log
23:03:55
23:03:55 Crop(0,0,1920,816)
23:03:55 -----------------------------------------------------------------------
23:03:55 Script movie.avs
23:03:55
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\AddGrain.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\autocrop.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\aWarpSharp(Pruned).dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\blockbuster.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\cnr2.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\ColorMatrix.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\Convolution3D.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\corrector.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\DctFilter.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\Decomb.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\Deen.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\degrainmedian.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\DGDecode.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\EEDI2.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\FFMpegSource.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\FFT3DFilter.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\FluxSmooth.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\frfun7.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\hqdn3d.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\LeakKernelDeint.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\MaskTools.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\medianblur.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\MipSmooth.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\MSharpen.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\mt_masktools.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\mvtools.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\NicAudio.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\RemoveGrainS.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\RepairS.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\SangNom.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\SimpleResize.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\SoundOut.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\TBilateral.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\TDeint.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\TIVTC.dll")
23:03:55 LoadPlugin("C:\Program Files\automkv\exe\filter\TomsMoComp.dll")
23:03:56 LoadPlugin("C:\Program Files\automkv\exe\filter\TTempSmooth.dll")
23:03:56 LoadPlugin("C:\Program Files\automkv\exe\filter\UnDot.dll")
23:03:56 LoadPlugin("C:\Program Files\automkv\exe\filter\UnFilter.dll")
23:03:56 LoadPlugin("C:\Program Files\automkv\exe\filter\VSFilter.dll")
23:03:56 LoadPlugin("C:\Program Files\automkv\exe\filter\warpsharp.dll")
23:03:56 #loadpluginstart
23:03:56
23:03:56 #test1
23:03:56
23:03:56 Import("C:\Program Files\automkv\exe\filter\BlindDeHalo3_mt2.avsi")
23:03:56 Import("C:\Program Files\automkv\exe\filter\Deblock_QED_MT2.avsi")
23:03:56 Import("C:\Program Files\automkv\exe\filter\FastLineDarken 1.3 MT MOD.avsi")
23:03:56 Import("C:\Program Files\automkv\exe\filter\HybridFuPP.avsi")
23:03:56 Import("C:\Program Files\automkv\exe\filter\LanczosPlus.avsi")
23:03:56 Import("C:\Program Files\automkv\exe\filter\Lem.avsi")
23:03:56 Import("C:\Program Files\automkv\exe\filter\LimitedSharpenFaster.avsi")
23:03:56 Import("C:\Program Files\automkv\exe\filter\MCBob_v03c.avsi")
23:03:56 Import("C:\Program Files\automkv\exe\filter\mvbob.avsi")
23:03:56 Import("C:\Program Files\automkv\exe\filter\QMlib.avsi")
23:03:56 Import("C:\Program Files\automkv\exe\filter\seesaw.avsi")
23:03:56 Import("C:\Program Files\automkv\exe\filter\spresso.avsi")
23:03:56 #importstart
23:03:56
23:03:56 #test2
23:03:56
23:03:56 movie = directshowsource("C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR\The.Kingdom.2007.1080p.HDDVD.x264-ESiR.mkv",fps=23.976044,convertfps=true,audio=false)
23:03:56 movie = isRGB(movie) ? ConvertToYV12(movie,interlaced=true) : movie
23:03:56 movie = isYUY2(movie) ? ConvertToYV12(movie,interlaced=true) : movie
23:03:56 function getOrder(clip c) {
23:03:56 order = GetParity(c) ? 1 : 0
23:03:56 Return order }
23:03:56 #filter1start
23:03:56
23:03:56 #test3
23:03:56
23:03:56 last = movie
23:03:56 fixed_aspect = 1.777700
23:03:56 out_width = 1920
23:03:56 out_height = 816
23:03:56 #resizestart
23:03:56
23:03:56 #test4
23:03:56
23:03:56 #filter2start
23:03:56
23:03:56 #test5
23:03:56
23:03:56 RemoveGrain(mode=2)
23:03:56 -----------------------------------------------------------------------
23:03:56 Script VirtualDubMod.vcf
23:03:56
23:03:56 VirtualDub.Open("D:\\rip\\temp\\movie.avi",0,0);
23:03:56 VirtualDub.RemoveInputStreams();
23:03:56 VirtualDub.stream[0].SetSource("D:\\rip\\temp\\audio.ac3",0x00000203,0);
23:03:56 VirtualDub.stream[0].DeleteComments(1);
23:03:56 VirtualDub.stream[0].AdjustChapters(1);
23:03:56 VirtualDub.stream[0].SetMode(0);
23:03:56 VirtualDub.stream[0].SetInterleave(1,500,1,0,0);
23:03:56 VirtualDub.stream[0].SetClipMode(1,1);
23:03:56 VirtualDub.stream[0].SetConversion(0,0,0,0,0);
23:03:56 VirtualDub.stream[0].SetVolume();
23:03:56 VirtualDub.stream[0].SetCompression();
23:03:56 VirtualDub.stream[0].EnableFilterGraph(0);
23:03:56 VirtualDub.stream[0].filters.Clear();
23:03:56 VirtualDub.video.DeleteComments(1);
23:03:56 VirtualDub.video.AddComment(0x00000005,"ISFT","Done with AutoMKV! http://forum.doom9.org/showthread.php?t=113811");
23:03:56 VirtualDub.video.AdjustChapters(1);
23:03:56 VirtualDub.video.SetDepth(24,24);
23:03:56 VirtualDub.video.SetMode(0);
23:03:56 VirtualDub.video.SetFrameRate(0,1);
23:03:56 VirtualDub.video.SetIVTC(0,0,-1,0);
23:03:56 VirtualDub.video.SetCompression();
23:03:56 VirtualDub.video.filters.Clear();
23:03:56 VirtualDub.SaveSegmentedAVI("D:\\rip\\The.Kingdom.avi",2000,0);
23:03:56 VirtualDub.Close();
23:03:56
23:03:56 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -

[buzzqw]

when automkv use ffmpeg.exe as last change for encoding, quality encoding isn't well supported (bitrate is very low)

i will check for next beta

BHH

[artisticcheese]

What can be done so FFMPeg is not used in the meantime? What can I do to check my system to make sure DirectShow is used instead?


What is "warpsharp.dll" which fails to load?
Trying to retrieve width and height from input header
xvid [info]: Avisynth detected
xvid [error]: Avisynth open failure:
LoadPlugin: unable to load "C:\Program Files\automkv\exe\filter\warpsharp.dll"
(C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR\temp\movie.avs,
line 41)

[buzzqw]

update to beta 4 uploaded (check the beta thread)

install ffdshow tryout beta 4
install haali media splitter
install xvid (koepi build)

OR download ffmpegsource 1.14 update the dll in \exe\filter AND use beta 4

BHH

[buzzqw]

for warp sharp error CHECK THE FIRST POST IN THIS THREAD

BHH

[artisticcheese]

for warp sharp error CHECK THE FIRST POST IN THIS THREAD

BHH

Yep, thanks, that fixed it. My Win2003 R2 box was missing some C++ DLLs, not DirectShow is being used.

[reddragon72]

sorry for the long post.

I have read this entire post over the last few days looking for answers to my questions and so far I have come up empty handed. So let me tell you what I am trying to do with autoMKV so you get a grasp on my issues.

First autoMKV has converted a ton of DVD's over to xvid for me with AC3 5.1 and EXCELLENT picture quality, so I know it works and it works VERY WELL!!! I am playing those through my wireless G network from a WHS(windows home server) machine to my Xbox 360 without a hitch and to all the PC's in the house. The DVD backups play wonderfully without an issue.

Now I have decided to get some HD movies and encode those and see what I get. Well I did fast and the furious tokyo drift and it came out great. 5.1 Xvid at 3gigs 1280x544(the original was 1920x816) on the 360 the xvid specs are 5k bitrate at 1280x720 with 5.1. well the encoded video looks great pretty much as good as the original however it spikes in the birate to 12k and the 360 cannot handle this. I though maybe my network was an issue so I put the vid on a DVD-r and external hardrive and it still stuttered and skipped and it always does in the exact same places. The sound keep playing but the video completely stops then starts up again after the scene.

So here is my question. How do I lower the bitrate to something that the 360 can handle? here is site that tells all for the 360 decoding ability.
http://blogs.msdn.com/xboxteam/archive/2007/11/30/december-2007-video-playback-faq.aspx

I also looked into maybe doing it in WMV since they post 15k for max birate, but autoMKV 93 and 93a will not allow 5.1 sound as the advanced audio always resets itself and 5.1 is a must for my movie experience pleasure. Xvid looks great so I checked the true highest bitrate the 360 can handle and it seems that 7k at 8seconds is the max it can handle. So how do I use VBR in xvid and limit the max bitrate?

[buzzqw]

@bigggt

sorry for late answer

make sure you have installed all software linked in first page
you can also try with the new 0.95 beta

@reddragon72
however it spikes in the birate to 12k and the 360 cannot handle this

on xvid profile change <VbvMaxRate>0</VbvMaxRate> to <VbvMaxRate>5000000</VbvMaxRate>

but autoMKV 93 and 93a will not allow 5.1 sound as the advanced audio always resets itself and 5.1 is a must for my movie experience pleasure

:rolleyes: check the wiki.... (even if with this sentence i can't guarantee the 100% success :p )

BHH

[reddragon72]

Ok I have a few Q's first I got the xml profile I want open and was just about to edit it when I noticed that there are three settings that might help.
<VbvPeakRate>0</VbvPeakRate>
<VbvMaxRate>0</VbvMaxRate>
<VbvBuffer>0</VbvBuffer>

I got the middle one and what that will do for me, but what about that first one can I set that in sec or something and limit the amount of time that the max bitrate is hit?

and what is the last on for? an I put the size of the buffer in there? if so that one might fix everything.

I also have noticed another issue, it seems that all the programs used to look at the xvid movies show AC3 2ch not 6? I will check this at home, but gspot and other(VLC) show only 2 channels and I swear it is 6 channels at home, but my surround system will auto up 2 to 6 if there is only a 2 channel source and it is really good at doing that, so when I get home I will check and make sure that the avi's are in fact 6ch and not 2ch as being reported.

[ZappoB]

When TS-Files are used for input, the Error "No Video sequence header found" is displayed at the moment I start encoding.

It seems, that the error is produced by DGIndex, not by AutoMKV. Are there settings for DGIndex to surpass this failure?

OR: Are there other known programs to split or encode TS-files?

[buzzqw]

@ZappoB

First of all Welcome to the forum!

in advanced settings check "Use ProjectX for TS files"

BHH

[glb]

Nobody cares about Rule 6 Infractions here right?

What can be done so FFMPeg is not used in the meantime? What can I do to check my system to make sure DirectShow is used instead?


What is "warpsharp.dll" which fails to load?
Trying to retrieve width and height from input header
xvid [info]: Avisynth detected
xvid [error]: Avisynth open failure:
LoadPlugin: unable to load "C:\Program Files\automkv\exe\filter\warpsharp.dll"
(C:\downloads\The.Kingdom\The.Kingdom.2007.1080p.HDDVD.x264-ESiR\temp\movie.avs,
line 41)

[weaver4]

I like automkv but I have had one complaint for a long time, but it could be I am missing something. I don't like to encode to size; I have a media center at home (popcornhour A-100) and on the road I use my iPod (or I store the files on my laptop). Never-ever needed to encode a movie to a specific size.

So all of the H264 profiles are "size" encoding except the one unconstrained CQ encoding. Now with Megui I can load any profile select Single Pass set the quantizer to 20 resave the profile to Some other name and I am set. For example my PopCornHour uses Level 4.1 so I load in the PS3 profile which is Level 4.1 set it to single pass Quantizer of 20 save it as PopCornHour-CQ20 and I am done.

With RipBot264 I need to load a profile, set it to single pass and I am done.

With StaxRip you select a template, go to the codec setup set it to single pass (check maximum bitrate) save it as a new template.

But I have never understood how to take one of the excellent automkv profiles and change it to single pass and save it as a new profile. I know I could use a text editor but I wouldn't know what parameters to change.

Just a comment.

[buzzqw]

start automkv, select any profile BUT Constan Quality
on advanced settings check Specify Quality

Now you will have a 1 pass encoding , with crf, with options based on profile you selected (i can suggest High performance)

BHH

[bigggt]

Hi buzzqw

I have installed everything in hte first link but still can't get the audio to work

i tired neroacc ,coding tech and even lame

i know its something on my end but can't figure it out

any more ideas

handbrake works on my system so i am assuming i have all the proper codecs and such

thanks

[buzzqw]

handbrake use it's own codecs not those avaiable in system

try opening yout avi in virtualdub, got errors ?

also open the avi with gspot and try rendering

BHH

[bigggt]

files open fine in vdub and no rendering problems with G-Spot

Now i am getting a message neroaac.exe has encountered a problem and needs to close

when i open windows task manager (when i get hung up on the conversion box) its vdubmod that is not working

[buzzqw]

@valnar

the profile must have _CQ_ and the <encodingmode> must be 1 or 9 for triggering the constant quality options

@bigggt
please check with new automkv beta

thanks

BHH

[hw360]

I've been using AutoMKV to convert big .mkv video to smaller .mkv video for PDA playing.
I usually burn subtitle (the subtitle is embended as a text stream in source .mkv file), it worked very well. However, it stops working recently. The subtitle is not burned into the final video (I did check 'burn subtitle' in AutoMKV advanced settings tab), although the source file plays fine with subtitle (MPC with CCCP codecs).


@buzzqw,

I use GraphEdit to open the source mkv file, video/audio/subtitle are all splitted correctly into correct filters. DirectVobSub renders video and subtitle together. When I play GraphEdit, the video has subtitle.

I checked the log file that AutoMKV created, it says "Avi engage mode not corrected, switched to DirectShowSource". I assume if GraphEdit plays the source file fine with subtitle, AutoMKV should create final video with subtitle, since it is part of the source video. Am I right?

:thanks:

[buzzqw]

I checked the log file that AutoMKV created, it says "Avi engage mode not corrected, switched to DirectShowSource". I assume if GraphEdit plays the source file fine with subtitle, AutoMKV should create final video with subtitle, since it is part of the source video. Am I right?

just open the movie.avs in virtualdub, do you see the subs ?

if not, set haali/vobsub to display, close virtualdub, restart virtualdub and re open the movie.avs. Now subs should be visible

if visible, automkv will encode the movie as you see in virtualdub

BHH

[ZappoB]

@ZappoB

First of all Welcome to the forum!

in advanced settings check "Use ProjectX for TS files"

BHH
Hi buzzqw,

thanks for the reply, I've tried it and got a strange result.

Here is the LOG:
01:59:45 0.93a - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
01:59:45 OS Version: Windows XP
01:59:45 Selected Input file: E:\Video-Cache\VOBs\~aufnahme\Spider-Man 3\aufnahme00_mux_cut.ts
01:59:45 Selected Output dir: E:\Video-Cache\Filme\HDTV\temp\
01:59:45 Selected Final Name: Spider-Man 3
01:59:45 Selected Container type: AVI
01:59:45 Selected Encoder: XviD
01:59:45 Selected Size: 1 DVD-R / 1
01:59:45 Selected Profile: 2_Pass_Balanced.xml
01:59:45 Selected Resizer: SimpleResize (neutral soft) / Automatic
01:59:45 Selected Filters: RemoveGrain(mode=2)
01:59:45 Selected Deinterlacer: AUTO
01:59:45 Selected Field Order: AUTO
01:59:45 Manual Crop: Enabled
01:59:45 Left Crop: 8
01:59:45 Top Crop: 72
01:59:45 Right Crop: 8
01:59:45 Botton Crop: 72
01:59:45 Manual Width: 1280
01:59:45 Manual Height: 540
01:59:45 Using Matrix: Sharktooth's EQM v3LR.cqm
01:59:45 Track Language 1: PID 0103, Private AC3 Audio Stream 1
01:59:45 Audio Codec 1: Copy Original
01:59:45 Track Language 2: NONE
01:59:45 Audio Codec 2: Lame
01:59:45 Activate Last line AVS Script:
01:59:45 Activate use ProjectX
01:59:45
01:59:45 Demuxing with C:\Programme\AutoMKV\exe\dgindex\ProjectX.jar -log -id 0x00FF,0x0103 -out "E:\Video-Cache\Filme\HDTV\temp" "E:\Video-Cache\VOBs\~aufnahme\Spider-Man 3\aufnahme00_mux_cut.ts"
02:07:03 Not fixing audio files
02:07:03 Renamed file to audio.ac3
The statusline keeps saying "encoding audio", but nothing happens for hours.

Just maybe: The last line of the logfile says "Renamed file to audio.ac3", but in the temp-folder the filename is audio1.ac3! Could this cause the problem?

Especially the audio should not be encoded at all - just copied (as stated in the log).

Many thanks for any further help.

[buzzqw]

@ZappoB

could you please try with automkv 0.95 BETA ?

thanks

BHH

[Nightshiver]

Why can AutoMKV not keep 5.1 audio? I have a DVD with 5.1 audio. I told AutoMKV to encode with Nero AAC but to keep the Original audio. Instead, it gave me stereo audio. Why is that?

[reddragon72]

Why can AutoMKV not keep 5.1 audio? I have a DVD with 5.1 audio. I told AutoMKV to encode with Nero AAC but to keep the Original audio. Instead, it gave me stereo audio. Why is that?


I have the same thing going on now. I encoded a bunch of DVD's and selected the AC3 codec with the "original" selector selected and all my AVI's have 2ch not 6ch.

Buzz can you look into this, I am using 93a.

[ZappoB]

@ZappoB

could you please try with automkv 0.95 BETA ?

thanks

BHH
I will give it a try. Just a small hint from you: where to download?

:thanks:

[Nightshiver]

I will give it a try. Just a small hint from you: where to download?

:thanks:

If you went a few pages back you would know. Heres the link anyway: http://forum.doom9.org/showthread.php?t=133509

[buzzqw]

I have the same thing going on now. I encoded a bunch of DVD's and selected the AC3 codec with the "original" selector selected and all my AVI's have 2ch not 6ch.

Buzz can you look into this, I am using 93a.

check in log if channel is "Original"
make sure that is used nicac3source in mkvmaudio.avs and not directshowsource

5.1 is working

BHH

[Nightshiver]

17:53:31 0.93 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
17:53:31 OS Version: Windows XP
17:53:31 Selected Input file: D:\Games\VIDEO_TS\VTS_01_1.VOB
17:53:31 Selected Output dir: D:\temp\
17:53:31 Selected Final Name: Neon Genesis
17:53:31 Selected Container type: MKV
17:53:31 Selected Encoder: X264
17:53:31 Selected Size: 1/4 CD / 1
17:53:31 Selected Profile: 2_Pass_Insane_Quality.xml
17:53:31 Selected Resizer: LanczosResize / 640
17:53:31 Selected Filters: Deen("w3d",3,4,7)
17:53:31 Selected Deinterlacer: AUTO
17:53:31 Selected Field Order: AUTO
17:53:31 Enabled CRF/CQ AutoRes at 18 value
17:53:31 Track Language 1: 80: AC3 3/2 448
17:53:31 Audio Codec 1: Nero AAC
17:53:31 Audio Quality 1: 1.00
17:53:31 Audio Channel 1: Original
17:53:31 Track Language 2: 81: AC3 3/2 448
17:53:31 Audio Codec 2: Nero AAC
17:53:31 Audio Quality 2: 1.00
17:53:31 Audio Channel 2: Original
17:53:31 Advanced Audio Settings DUMP Track 1
17:53:31 Audio Track Language: eng
17:53:31 Nero Option Profiles: AUTO --- Encoding Mode: Quality
17:53:31 CCT Option Profiles: AUTO --- Channel Options: AUTO
17:53:31 Lame Settings: ABR
17:53:31 Audio Normalization: 1
17:53:31 Frequency: AUTO --- Tempo: NONE --- Pitch: NONE --- Other Add:
17:53:31 Advanced Audio Settings DUMP Track 2
17:53:31 Audio Track Language: jpn
17:53:31 Nero Option Profiles: AUTO --- Encoding Mode: Quality
17:53:31 CCT Option Profiles: AUTO --- Channel Options: AUTO
17:53:31 Lame Settings: ABR
17:53:31 Audio Normalization: 1
17:53:31 Frequency: AUTO --- Tempo: NONE --- Pitch: NONE --- Other Add:
17:53:31
17:53:31 Dgindex CMD: D:\AutoMKV093_NORIP\exe\dgindex\dgindex.exe -FO=0 -OM=1 -TN=80,81 -YR=2 -AIF=[D:\Games\VIDEO_TS\VTS_01_1.VOB] -OF=[D:\temp\movie] -exit -minimize
17:53:31 D2V file size: 2801
17:53:31 Starting fixing audio delay on track number T80
17:53:31 DelayCut CMD: D:\AutoMKV093_NORIP\exe\dgindex\Delaycut.exe -auto -out "D:\temp\fixed1.ac3" "D:\temp\movie t80 3_2ch 448kbps delay 0ms.ac3"
17:53:31 Original movie t80 3_2ch 448kbps delay 0ms.ac3 Audio Size: 949760 bytes
17:53:31 Fixed1 Audio Size: 949760 bytes
17:53:31 Starting fixing audio delay on track number T81
17:53:31 DelayCut CMD: D:\AutoMKV093_NORIP\exe\dgindex\Delaycut.exe -auto -out "D:\temp\fixed2.ac3" "D:\temp\movie t81 3_2ch 448kbps delay 0ms.ac3"
17:53:31 Original movie t81 3_2ch 448kbps delay 0ms.ac3 Audio Size: 949760 bytes
17:53:31 Fixed2 Audio Size: 949760 bytes
17:53:31 Finished fixing audio delay
17:53:31 Encoding D:\temp\fixed1.ac3 to NeroAAC with 1.00 quality
17:53:50 Encoded 1' Audio Track: 933967 bytes
17:53:50 Encoding D:\temp\fixed2.ac3 to NeroAAC with 1.00 quality
17:54:08 Encoded 2' Audio Track: 918166 bytes
17:54:11 Number of Frames: 508
17:54:11 Framerate: 29.970030
17:54:11 Movie length in Seconds: 17
17:54:11 Movie Width/Height: 720/480
17:54:11 DgIndex AR: 4:3
17:54:41 Source is declared bff by a margin of 18/7.
17:54:41 Advanced Deinterlace Routines Log
17:54:41 Analyzed 74 sections of five frames
17:54:41 Found Interlace Sections: 3 4.05%
17:54:41 Found Progressive Sections:0 0.00%
17:54:41 Found Telecined Sections: 71 95.95%
17:54:41 Found Zero Mov: 0.00% 0
17:54:41 Found One Mov: 4.05% 3
17:54:41 Found Two Mov: 95.95% 71
17:54:41 Found Three Mov: 0.00% 0
17:54:41 Found Four Mov: 0.00% 0
17:54:41 Found Five Mov: 0.00% 0
17:54:41 The Movie is declared to telecined
17:54:41 Starting X264

So, the audio does indeed say "Original". As for the nicac3source, it is using that. Here you go:

LoadPlugin("D:\AutoMKV093_NORIP\exe\filter\NicAudio.dll")
LoadPlugin("D:\AutoMKV093_NORIP\exe\filter\SoundOut.dll")
LoadPlugin("D:\AutoMKV093_NORIP\exe\filter\FFmpegSource.dll")
NicAC3Source("D:\temp\fixed1.ac3")
#Applying ORIGINAL downmixing routines

function addvideo(clip c) {
blankclip(length = Int(100 * AudioLengthF(c) / float(audiorate(c))), fps=100)
Return audiodub(last,c)
}
Normalize()

Soundout(output="cmd",type=1,format=3,autoclose=true,executable="D:\AutoMKV093_NORIP\exe\besweet\neroaacenc.exe",prefilename=" -ignorelength -q 1.00 -if - -of audio.mp4",postfilename="",nofilename=true,showoutput=false)

[ZappoB]

@ZappoB

could you please try with automkv 0.95 BETA ?

thanks

BHH
Ok, new try but old problem. It keeps saying "Encoding Audio Files..." without doing anything. DGIndex is open in background with an empty window, nothing loaded in it.

The audio file is correctly extracted and has the name "audio1.ac3" - shouldn't it be "audio.ac3"?

EDIT: OK, it seems to be a problem with the filename or the script! If I load "audio1.ac3" into DGIndex, the process goes on...

I come back later and report, if the job could be finished.

[hw360]

@buzzqw

Thank you for your tips. Haali has a setting Auto Load VSSplit, that does the trick. Now the subtitle is burned into video. :thanks:

[reddragon72]

check in log if channel is "Original"
make sure that is used nicac3source in mkvmaudio.avs and not directshowsource

5.1 is working

BHH

I just checked and it is set to original, but Gspot, vlc, and my surround sound system are reporting it as 2ch. I'm running another test run right now from another DVD.

Also please help with this other very important issue. I'm trying to setup a xbox360 Xvid profile, and am trying to limit the bitrate to 6000. you told me to set <VbvMaxRate> to 6000000 and I'm still getting bitrates in the 9000+ range. Please help me figure this out so I can help others out that are trying to get HD Xvid movies on there 360.

[buzzqw]

@Nightshiver

LoadPlugin("D:\AutoMKV093_NORIP\exe\filter\NicAudio.dll")
LoadPlugin("D:\AutoMKV093_NORIP\exe\filter\SoundOut.dll")
LoadPlugin("D:\AutoMKV093_NORIP\exe\filter\FFmpegSource.dll")
NicAC3Source("D:\temp\fixed1.ac3")
#Applying ORIGINAL downmixing routines

function addvideo(clip c) {
blankclip(length = Int(100 * AudioLengthF(c) / float(audiorate(c))), fps=100)
Return audiodub(last,c)
}
Normalize()

Soundout(output="cmd",type=1,format=3,autoclose=true,executable="D:\AutoMKV093_NORIP\exe\besweet\neroaacenc.exe",prefilename=" -ignorelength -q 1.00 -if - -of audio.mp4",postfilename="",nofilename=true,showoutput=false)

in this script there is nothing that will downmix the audio channels
please try opening audio.mp4 in foobar and look at proprierty info, you can also use avinaptic on final muxed file

@ZappoB
EDIT: OK, it seems to be a problem with the filename or the script! If I load "audio1.ac3" into DGIndex, the process goes on... :eek:
load audio on dgindex ???

@reddragon72
what is your "Disk Settings" ?

also edit the profile to this (i hope..)
<VbvPeakRate>6000000</VbvPeakRate>
<VbvMaxRate>6000000</VbvMaxRate>
<VbvBuffer>0</VbvBuffer>

BHH

[reddragon72]

@reddragon72
what is your "Disk Settings" ?

also edit the profile to this (i hope..)
<VbvPeakRate>6000000</VbvPeakRate>
<VbvMaxRate>6000000</VbvMaxRate>
<VbvBuffer>0</VbvBuffer>

BHH

I set it to "3000" and I get that size every time. and I tried setting both of those to 6000000 and no change. When I use the SAP profile the bitrate limit seems to be 7000 or just a tad over, but that is still to much for the 360 to handle for long periods. it's almost like it is not useing the profile, and I changed all the profiles to make sure that the change is there.

[buzzqw]

again.. what is your disk settings ?

BHH

[reddragon72]

again.. what is your disk settings ?

BHH

I type in 3000 so I get a 3gig file. that is the only disk settings that I know of, and that is on the basics setting tab located in the middle on the bottom next to resizers. or is there another disk settings I am missing.

[buzzqw]

yea, it is what i mean

please post a log of encoding (or only thew xvid encoding bat)

BHH

[reddragon72]

yea, it is what i mean

please post a log of encoding (or only thew xvid encoding bat)

BHH

when I get home tonight I'll post it up for you to look at.

I also have the computer encoding another movie right now. I deleted everything and re downloaded autoMKV 93 then made the adjustments to see if that helps.

[cheshire2k]

sorry if im alittle vague with this post but im having a few problems automkv was working fine until i started using hte new 9.3 version now what it does is says the output bitrate is like a million or sommit and takes forever to process any ideas also ive tried the beta version to still does it also is there anyway to set a custom resolution ?.

Thanks

[buzzqw]

@cheshire2k

First of all Welcome to the Forum!

:logfile:

BHH

[cheshire2k]

:( ive lost it next time it happens ill post here and can i change the resolution ?

Thanks
P.S What do the filters do

[Nightshiver]

Alright, I looked at the audio and it does indeed say 6 channel. But why does it say Stereo when I play the file in VLC?

[bigggt]

I have a Pentium D CPU 3.00 GHz and 3 gb of ram , when i try to encode a 3 gb avi to mp4 format with the ps3 preset the second pass takes 6 hours and Windows Task manager is reporting 100% cpu usage

is this normal

[chrislynch]

I cannot seem to complete a 2-pass Xvid AVI encode using AutoMKV. On the second pass, xvid_encraw.exe crashes. Here is what I get:


Problem signature:
Problem Event Name: APPCRASH
Application Name: xvid_encraw.exe
Application Version: 0.0.0.0
Application Timestamp: 46d75f5f
Fault Module Name: xvidcore.dll
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 46a74f0c
Exception Code: c0000005
Exception Offset: 00025d9f
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Information 1: bab8
Additional Information 2: a28567c5a84425e7c226e00a51578120
Additional Information 3: 4f3d
Additional Information 4: 6416176985aa6b9751507bbb2bd3d347

Here is the log output:

15:25:20 0.95 beta 7 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
15:25:20 Selected Input file: C:\DOMINO\VIDEO_TS\VTS_01_0.IFO
15:25:20 Selected Output dir: C:\Users\Chris\Desktop\automkv\temp\
15:25:20 Selected Final Name: DOMINO
15:25:20 Selected Container type: AVI
15:25:20 Selected Encoder: XviD
15:25:20 Selected Size: 3 CD / 1
15:25:20 Selected Profile: 2_Pass_Extreme_Quality.xml
15:25:20 Selected Resizer: BicubicResize (sharp=0,0.75) / 1280
15:25:20 Selected Filters: RemoveGrain(mode=3)
15:25:20 Selected Deinterlacer: AUTO
15:25:20 Selected Field Order: AUTO
15:25:20 Activate PGC Ripping: 1
15:25:20 Using Matrix: Sharktooth's EQM v3HR.cqm
15:25:20 Track Language 1: 80: English (AC3 6ch, 0xBD 0x80) [0]
15:25:20 Audio Codec 1: AC3
15:25:20 Audio Quality 1: 448
15:25:20 Audio Channel 1: DPL II
15:25:20 Track Language 2: NONE
15:25:20 Audio Codec 2: Lame
15:25:20 Advanced Audio Settings DUMP Track 1
15:25:20 Audio Track Language: und
15:25:20 Nero Option Profiles: AUTO --- Encoding Mode: Quality
15:25:20 CCT Option Profiles: AUTO --- Channel Options: AUTO
15:25:21 Lame Settings: ABR
15:25:21 Audio Normalization: 1
15:25:21 Frequency: AUTO --- Tempo: NONE --- Pitch: NONE --- Other Add:
15:25:21
15:25:21 Activate PGC processing: PGC 1 [2:07:27:06]
15:25:21 Dgindex CMD: C:\Users\Chris\Desktop\automkv\exe\dgindex\dgindex.exe -FO=0 -OM=1 -TN=80 -YR=2 -AIF=[C:\DOMINO\VIDEO_TS\VTS_01_1.vob] -OF=[C:\Users\Chris\Desktop\automkv\temp\movie] -exit -minimize
15:28:50 D2V file size: 988749
15:28:50 Audio 1 :movie t80 3_2ch 448kbps delay 0ms.ac3
15:28:50 Pre Audio Size: 428614144 bytes
15:28:51 Applying DelayAudio of 0 to audio file: movie t80 3_2ch 448kbps delay 0ms.ac3
15:28:51 Encoding C:\Users\Chris\Desktop\automkv\temp\movie t80 3_2ch 448kbps delay 0ms.ac3 to AC3 with 448 quality
15:37:10 Unable to encode Audio, try piping with FFmpeg!
15:39:25 Encoded 1' Audio Track: 428612352 bytes
15:39:25 D2V Film Detected: 100.000000% FILM found
15:39:28 Number of Frames: 229387
15:39:28 Framerate: 29.970030
15:39:28 Movie length in Seconds: 7654
15:39:28 Movie Width/Height: 720/480
15:39:28 DgIndex AR: 16:9
15:44:22 Source is declared tff by a margin of 182/0.
15:44:22 Advanced Deinterlace Routines Log
15:44:22 Analyzed 978 sections of five frames
15:44:22 Found Interlace Sections: 15 1.53%
15:44:22 Found Progressive Sections:67 6.85%
15:44:22 Found Telecined Sections: 896 91.62%
15:44:22 Found Zero Mov: 6.85% 67
15:44:22 Found One Mov: 1.53% 15
15:44:22 Found Two Mov: 91.62% 896
15:44:22 Found Three Mov: 0.00% 0
15:44:22 Found Four Mov: 0.00% 0
15:44:22 Found Five Mov: 0.00% 0
15:44:22 The Movie is declared to telecined
15:44:22 FIRST pass XviD: "C:\Users\Chris\Desktop\automkv\exe\encoder\xvid_encraw.exe" -pass1 -bitrate 1846 -turbo -max_bframes 2 -imax 16 -qpel -quality 6 -vhqmode 4 -pmax 16 -bmax 16 -bquant_ratio 162 -kboost 20 -odegrade 9 -nopacked -nochromame -bvhq -threads 0 -qmatrix "C:\Users\Chris\Desktop\automkv\profiles\XviD-profiles\matrix\Sharktooth's EQM v3HR.cqm" -i "C:\Users\Chris\Desktop\automkv\temp\movie.avs" -type 2 -avi "C:\Users\Chris\Desktop\automkv\temp\movie.avi"
15:44:22 SECOND pass XviD: "C:\Users\Chris\Desktop\automkv\exe\encoder\xvid_encraw.exe" -pass2 -bitrate 1846 -max_bframes 2 -imax 16 -qpel -quality 6 -vhqmode 4 -pmax 16 -bmax 16 -bquant_ratio 162 -kboost 20 -odegrade 9 -nopacked -nochromame -bvhq -threads 0 -qmatrix "C:\Users\Chris\Desktop\automkv\profiles\XviD-profiles\matrix\Sharktooth's EQM v3HR.cqm" -i "C:\Users\Chris\Desktop\automkv\temp\movie.avs" -type 2 -avi "C:\Users\Chris\Desktop\automkv\temp\movie.avi"
16:52:27 Starting Second Pass

I am running Windows Vista Home Premium 32bit without SP1. I have no codec packs installed. I only have Xvid 1.1.3, Haali Media Splitter, AC3Filter, and CoreAVC installed. I found an older version of the xvidcore.dll, and replaced it with your pacakged on. I have tried AutoMKV 0.93a and 0.97beta7.

I am trying to rip my DVD's and upconvert at the same time so I can stream them to my Xbox 360.

How can I fix this?

If I cannot fix this, I will have no other choice but to encode to WMV.

[buzzqw]

@cheshire2k

an i change the resolution

... you can change width in main panel .. or use manual resize in advanced settings

and filters.. do varius things.. search filter's name on forum

@bigggt

what's resolution (width/height) ? .. and yes.. can be normal (can be due to filters, deinterlacer...)

@chrislynch

try this buiild http://members.optusnet.com.au/squid_80/xvid_encraw.zip
and if failing
this http://tirnanog.fate.jp/mirror/XviD/xvid_encraw.7z

unzip in \exe\encoder

BHH

[cheshire2k]

does anyone have the links to download the noinstall version of 0.91 ? thanks

[buzzqw]

www.64k.it/andres

go in "a"

BHH

[cheshire2k]

does anyone know what the best filter to use to sharpen the movie or would i have to add one my self.
Thanks

[buzzqw]

as filert use SeeSaw
as resizer use LimitedSharpenFaster

BHH

[spotter]

@buzzqw: I seem to be seeing slightly undersized files (1-2MB). I set it for 350 (1/2 CD) and get 348 or recently set for 370 and get 368.

This is x264/mkv files, could it be overestimating the muxing overhead?

thanks.

[buzzqw]

2 or 3 mb of downsize it's a safe margin

i prefer to keep it a little smaller than bigger and cannot burn

if you prefer set disk settings to 353 for gaining 3 mb...

BHH

[kikker]

Hi, I'm trying to use the latest version, however, the ffmpeg libraries can't be copied to my system32 folder in Vista. I've tried running the exe both as a limited user and as an admin.

Which files need to be copied to that folder, and why is it necessary in this latest version of AutoMKV that files need to copied to my system folder?

[buzzqw]

ffmpegsource library is needed to copy into a system folder only for opening avs files created by automkv in virtualdub

when automkv is running it creates a virtual path that include all \exe\encoder folder

in automkv 0.95 and with new ffmpegsource.dll (1.14) there not need to copy ffmpegsource dlls to system folder

BHH

[kikker]

Ok, thanks, but why does the app try to copy unsuccessfully the 8 files into the system32 folder if there is a virtual path in the exe folder? In other words, I'm not sure I follow what you are saying.

[cheshire2k]

21:03:15 0.93 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
21:03:15 OS Version: Windows XP
21:03:15 Selected Input file: F:\VIDEO_TS\VTS_01_0.IFO
21:03:15 Selected Output dir: C:\TEMP\temp\
21:03:15 Selected Final Name: VTS_01_0
21:03:15 Selected Container type: MKV
21:03:15 Selected Encoder: X264
21:03:15 Selected Size: 2 CD / 1
21:03:15 Selected Profile: 2_Pass_Insane_Quality.xml
21:03:15 Selected Resizer: LimitedSharpenFaster / 1024
21:03:15 Selected Filters: SeeSaw()
21:03:15 Selected Deinterlacer: AUTO
21:03:15 Selected Field Order: AUTO
21:03:15 NeroAACEnc.exe: not present
21:03:15 Enabled CRF/CQ AutoRes at 18 value
21:03:15 Activate PGC Ripping: 1
21:03:15 Track Language 1: 80: English (AC3 6ch, 0xBD 0x80) [0]
21:03:15 Audio Codec 1: Copy Original
21:03:15 Track Language 2: NONE
21:03:15 Audio Codec 2: Ogg Vorbis
21:03:15
21:03:15 Activate PGC processing: PGC 1 [1:32:36:22]
21:03:15 Dgindex CMD: G:\AutoMKV093\exe\dgindex\dgindex.exe -FO=0 -OM=1 -TN=80 -YR=2 -AIF=[F:\VIDEO_TS\VTS_01_1.vob] -OF=[C:\TEMP\temp\movie] -exit -minimize
21:05:40 D2V file size: 724984
21:05:40 Starting fixing audio delay on track number T80
21:05:40 DelayCut CMD: G:\AutoMKV093\exe\dgindex\Delaycut.exe -auto -out "C:\TEMP\temp\fixed1.ac3" "C:\TEMP\temp\movie t80 3_2ch 448kbps delay -192ms.ac3"
21:05:40 Original movie t80 3_2ch 448kbps delay -192ms.ac3 Audio Size: 310266429 bytes
21:05:50 Fixed1 Audio Size: 310254336 bytes
21:05:50 Finished fixing audio delay
21:05:50 Renamed file fixed1.ac3 to audio.ac3
21:05:50 Encoded 1' Audio Track: 310254336 bytes
21:07:10 Avi engage mode not corrected, switched to DirectShowSource
21:07:13 !!! WARNING - Trying with FFmpegSource
21:07:15 Aspect ratio: 16:9
21:07:15 Number of Frames:
21:07:15 Framerate:
21:07:15 Movie length in Seconds: 1
21:07:15 Movie Width/Height: /
21:07:15 DgIndex AR: 16:9
21:07:16 Aspect ratio: 16:9
21:07:16 Number of Frames:
21:07:16 Framerate:
21:07:16 Movie length in Seconds: 1
21:07:16 Movie Width/Height: /
21:07:16 DgIndex AR: 16:9
21:07:17 Source is hybrid bff and tff at 0 bff and 0 tff.
21:07:17 Advanced Deinterlace Routines Log
21:07:17 Analyzed 0 sections of five frames
21:07:17 Found Interlace Sections: 0 -1.#J%
21:07:17 Found Progressive Sections:0 -1.#J%
21:07:17 Found Telecined Sections: 0 -1.#J%
21:07:17 Found Zero Mov: -1.#J% 0
21:07:17 Found One Mov: -1.#J% 0
21:07:17 Found Two Mov: -1.#J% 0
21:07:17 Found Three Mov: -1.#J% 0
21:07:17 Found Four Mov: -1.#J% 0
21:07:17 Found Five Mov: -1.#J% 0
21:07:17 Starting X264
21:07:17 Command Line 1' Pass X264: G:\AutoMKV093\exe\encoder\x264.exe --pass 1 --bitrate 9252755 --stats "C:\TEMP\temp\.stats" --ref 1 --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --no-fast-pskip --filter -2,-1 --subme 2 --direct auto --vbv-maxrate 25000 --me dia --no-ssim --level 4.1 --merange 32 --b-pyramid --analyse none --threads auto --thread-input --output NUL "C:\TEMP\temp\movie.avs"
21:07:17 Command Line 2' Pass X264: G:\AutoMKV093\exe\encoder\x264.exe --pass 2 --bitrate 9252755 --stats "C:\TEMP\temp\.stats" --progress --keyint 250 --bframes 3 --qpmin 10 --qpmax 51 --no-psnr --no-fast-pskip --mixed-refs --trellis 2 --ref 16 --filter -2,-1 --subme 6 --direct auto --vbv-maxrate 25000 --me umh --no-ssim --level 4.1 --merange 32 --weightb --b-pyramid --b-rdo --bime --analyse p8x8,b8x8,i4x4,i8x8,p4x4 --8x8dct --threads auto --thread-input --output "C:\TEMP\temp\movie.mp4" "C:\TEMP\temp\movie.avs"
21:07:20 Finished 1' Pass X264
21:07:25 "G:\AutoMKV093\exe\matroska\mkvmerge.exe" -o "C:\TEMP\temp\VTS_01_0.mkv" --track-name -1:"VTS_01_0" --aspect-ratio 1:-1.#IND00 --split 700M --split-max-files 2 --chapters "G:\AutoMKV093\exe\chapters.txt" "C:\TEMP\temp\movie.mp4" --language -1:eng --default-track -1:yes "C:\TEMP\temp\audio.ac3" --title "Done with AutoMKV 0.93 http://forum.doom9.org/showthread.php?p=854221 "
21:07:25 Encoding finished: 00:00:05 elapsed time
21:07:25 -----------------------------------------------------------------------
21:07:25 Script movie.avs
21:07:25
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\AddGrain.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\autocrop.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\aWarpSharp(Pruned).dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\blockbuster.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\cnr2.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\ColorMatrix.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\Convolution3D.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\corrector.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\DctFilter.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\Decomb.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\Deen.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\degrainmedian.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\DGDecode.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\EEDI2.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\FFMpegSource.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\FFT3DFilter.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\FluxSmooth.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\frfun7.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\hqdn3d.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\LeakKernelDeint.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\MaskTools.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\medianblur.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\MipSmooth.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\MSharpen.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\mt_masktools.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\mvtools.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\NicAudio.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\RemoveGrainS.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\RepairS.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\SangNom.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\SimpleResize.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\SoundOut.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\TBilateral.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\TDeint.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\TIVTC.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\TomsMoComp.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\TTempSmooth.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\UnDot.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\UnFilter.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\VSFilter.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\warpsharp.dll")
21:07:25 #loadpluginstart
21:07:25
21:07:25 #test1
21:07:25
21:07:25 Import("G:\AutoMKV093\exe\filter\BlindDeHalo3_mt2.avsi")
21:07:25 Import("G:\AutoMKV093\exe\filter\Deblock_QED_MT2.avsi")
21:07:25 Import("G:\AutoMKV093\exe\filter\FastLineDarken 1.3 MT MOD.avsi")
21:07:25 Import("G:\AutoMKV093\exe\filter\HybridFuPP.avsi")
21:07:25 Import("G:\AutoMKV093\exe\filter\LanczosPlus.avsi")
21:07:25 Import("G:\AutoMKV093\exe\filter\Lem.avsi")
21:07:25 Import("G:\AutoMKV093\exe\filter\LimitedSharpenFaster.avsi")
21:07:25 Import("G:\AutoMKV093\exe\filter\MCBob_v03c.avsi")
21:07:25 Import("G:\AutoMKV093\exe\filter\mvbob.avsi")
21:07:25 Import("G:\AutoMKV093\exe\filter\QMlib.avsi")
21:07:25 Import("G:\AutoMKV093\exe\filter\seesaw.avsi")
21:07:25 Import("G:\AutoMKV093\exe\filter\spresso.avsi")
21:07:25 #importstart
21:07:25
21:07:25 #test2
21:07:25
21:07:25 movie = mpeg2source("C:\TEMP\temp\movie.d2v")
21:07:25 function getOrder(clip c) {
21:07:25 order = GetParity(c) ? 1 : 0
21:07:25 Return order }
21:07:25 #filter1start
21:07:25
21:07:25 #test3
21:07:25
21:07:25 #cropstart
21:07:25
21:07:25 cropclip = autocrop(movie,mode=0,wmultof=4,hmultof=4,samples=40,aspect=0,threshold=34,samplestartframe=0)
21:07:25 fixed_aspect = -1.#IND00
21:07:25 c_width = width(cropclip)
21:07:25 c_height = Round(height(cropclip) / fixed_aspect)
21:07:25 input_par = float(float(c_width)/float(c_height))
21:07:25 input_par = input_par > 1.4 ? input_par : (4.0/3.0)
21:07:25 out_width = 1024
21:07:25 out_height = Round(float(out_width) / input_par)
21:07:25 hmod = out_height - (floor(out_height / 16 ) * 16)
21:07:25 out_height = (hmod > 4) ? (out_height + (16 - hmod)) : (out_height - hmod)
21:07:25 new_aspect = (float(out_width) / float(out_height)) / fixed_aspect
21:07:25 autocrop(movie,mode=0,wmultof=4,hmultof=4,samples=40,aspect=new_aspect,threshold=34,samplestartframe=0)
21:07:25
21:07:25 #resizestart
21:07:25
21:07:25 #test4
21:07:25
21:07:25 LimitedSharpenFaster(smode=4,ss_x=1.25, ss_y=1.25, strength=150, overshoot=1,dest_x=out_width,dest_y=out_height)
21:07:25 #filter2start
21:07:25
21:07:25 #test5
21:07:25
21:07:25 SeeSaw()
21:07:25 -----------------------------------------------------------------------
21:07:25 Script mkvmaudio.avs
21:07:25
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\NicAudio.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\SoundOut.dll")
21:07:25 LoadPlugin("G:\AutoMKV093\exe\filter\FFmpegSource.dll")
21:07:25 NicAC3Source("C:\TEMP\temp\fixed1.ac3")
21:07:25 #Applying STEREO downmixing routines
21:07:25 function stereo(clip a)
21:07:25 {
21:07:25 flr = GetChannel(a, 1, 2)
21:07:25 fcc = GetChannel(a, 3)
21:07:25 lfe = GetChannel(a, 4)
21:07:25 lfc = MixAudio(fcc, lfe, 0.2071, 0.2071)
21:07:25 mix = MergeChannels(lfc, lfc)
21:07:25 lrc = MixAudio(flr, mix, 0.2929, 1.0)
21:07:25 blr = GetChannel(a, 5, 6)
21:07:25 Return MixAudio(lrc, blr, 1.0, 0.2929)
21:07:25 }
21:07:25 #
21:07:25 6==Audiochannels() ? stereo() : last
21:07:25 function addvideo(clip c) {
21:07:25 blankclip(length = Int(100 * AudioLengthF(c) / float(audiorate(c))), fps=100)
21:07:25 Return audiodub(last,c)
21:07:25 }
21:07:25 Normalize()
21:07:25
21:07:25
21:07:25 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -

When I converted nothing comes out but this my LOG.

[nx6]

Alternatively... if you want total control of your choice of encoding section/segment (intro's can be misleading at times)... consider loading the file directly into DGIndex (AutoMKV095\exe\DGIndex\DGIndex.exe).
Select the section ([...]) of your choice...

Save project... and then load the d2v file into AutoMKV (skipping audio if you so prefer).

Pascal
Don't forget to adjust the size of the final movie to match the size of the clip you take if you're not using a ConstantQuality profile.

Take the number of minutes in the movie divided by the targeted final size of file for the full movie, then multiply by the number of minutes you're using for your sample. On my last project I was not using audio in the sample. So I estimated the bitrate the audio would use and found the size the audio would have taken up in the sample and subtracted that out, too.

[buzzqw]

@kikker
ok.. i wil try to explain better (and sorry for my english)
while automkv is up and running the \exe\encoder is a system folder , so windows when searching for some dlls will search even in this directory

when automkv is shut down the virtual path is removed and the dlls in \exe\encoder aren't more avaiable to windows

the ffmpegsource.dll need for fuction that other dlls (zlib.dll, avcodec.dll, sw-scale.dll...) are in avaiable to windows; this is not a problem when automkv is running (the virtual path)

BUT when automkv is closed, the script created by automkv (that do loadplugin("ffmpegsource.dll")) aren't "loadable" by virtualdub since the needed dlls aren't avaiable , aren't in path

so if you allow to copy the dlls even when automkv is not running you will be able to open automkv script in virtualdub :)

ok?

@cheshire2k

make sure you have installed ALL software linked in first post
i can bet that something is missing..

BHH

[cheshire2k]

soft like ? i just downloaded the http://www.64k.it/andres/data/a/AutoMKV093.rar link what else do i need when i was using an earlier version there was no problems but now it says its converting in a cmd prompt box 32x32 or sommit.

[buzzqw]

reinstall avisynth 2.57
reinstall xvid koepi build
reinstall ffdshow tryout beta 4

something gone wild in your system

you can even try the new 0.95 beta

BHH

[cheshire2k]

ok sorry for asking on here but you guys seem to know your stuff but what i want is to know to sharpen a movie but keep the same compression ive tried to do an avs but it I have to recompress but i dont know what settings to use as i use 1 click wizards. Any idea on how to use that seesaw .

Thanks

[TSX1]

Is it possible to remove an Audio track from a MKV file with two or more audio track (trying to reduce file size)? Is it possible with AutoMKV?
Thanks in advance

[buzzqw]

@TSX1

First of All Welcome to the Forum

you don't neet automkv

install mkvtoolnix, launch mmg.exe
drag&drop your mkv, deselect what you don't want and remux

BHH

[Honeyko]

Is it possible to remove an Audio track from a MKV file with two or more audio track (trying to reduce file size)?

MKVmerge GUI is what you're looking for, and man is it great.

[TSX1]

@buzzqw
Thank you very much, first because of your very quick reply and second because of your great software!

@Honeyko
Thank you too

I'll try it.

[kikker]

Buzzq, thanks for the explanation regarding the virtual system folder in exe/encoder. I've copied ffmpegsource along with the required libraries into my system32 folder. And, I run AutoMKV from a separate partition on the hard drive (data drive) to avoid any write issues to the system drive.

However, virtualdubmod crashes everytime I try to open an MKV (AVC) and encode to a MP4 (x264). I wonder if the virtual path (exe/encoder) must be on the same partition as the system drive.

[buzzqw]

However, virtualdubmod crashes everytime I try to open an MKV (AVC) and encode to a MP4 (x264). I wonder if the virtual path (exe/encoder) must be on the same partition as the system drive.

i said opening avs script made by automkv.. not mkv..

if you want open mkv you must write a script like this

loadplugin("ffmpegsource.dll")
ffmpegsource("mymovie.mkv")

for example

BHH

[spotter]

@buzzqw: sh0dan has a fixed version of soundout available (albiet test version). It might be worthwhile to remove the timeout from automkv and just point them to the modified (hopefully soonly available in released form) version of soundout.

[kikker]

i said opening avs script made by automkv.. not mkv..

if you want open mkv you must write a script like this

loadplugin("ffmpegsource.dll")
ffmpegsource("mymovie.mkv")


Great! I've traced the problem to the audio encoding. Any one of the following outcomes may happen with the same exact film. During the encoding, either VirtualDubMod crashes, or the audio encoding takes one full hour, or the log states that the audio stream is broken even after using directstream or ffmpegsource.

Doesn't 1 hour seem an abnormally long time for taking a 2-hour film's AC3 stream and converting to AAC (LC cbr 128 kbs)?

[buzzqw]

usually it works at least at 2x on my pc (p4 2.8) ...don't know your specs

i can STRONGLY suggest to update to latest ffmpegsource 1.14

BHH

[Zow]

Maybe I searched all wrong, but didn't find an answer....

I am trying to rip a couple of my Blue Ray disks to my HD and convert them to H.264 mkvs of about 4-5GB.

I have ripped the first disk with AnyDVD HD, but now I am stuck:

I can select the main movie in AutoMKV (which is all I want,) by choosing "*" All Files and then selecting the largest file in the Stream folder.

But how do I add the appropriate Audio stream and subtitles? Which files do I choose?

Also, any suggestions for what setting to choose for the best quality conversion within the 4-5GB limit?

(I am assuming that if I figure out how to convert Blue Ray, I'll be able to apply the same procedure to my HD-DVDs.)

[cheshire2k]

ok im still having problems today i tried to convert to xvid/mp3 and it keeps converting in x264.exe and once finished doing that it trys converting with 1123546746kbp or sommit stupid like this and im fully updated.

[delacroixp]

I just checked and it is set to original, but Gspot, vlc, and my surround sound system are reporting it as 2ch. I'm running another test run right now from another DVD.

I just wondered if all worked out !

I suppose there is no chance that you selected a 2-channel AC3.
Some movies, like Lord of the Rings, have a 5.1 surround and a 2-channel main audio track.


:):devil::D
Pascal

[Encoder888]

buzzqw

I have a question about aspect ratios. I've been encoding 16:9 movies with or without forcing it (result is normally the same) and everything seemed to be going fine, until I noticed that with some movies, there is a very slight difference between the way the movie is encoded and the way it actually is (both are supposed to be 16:9). When I play it with windows media classic it seems just fine, but then if I force 16:9 through the player, the picture "shrinks" by about 1/3 inch. I compared it with the actual DVD and the difference seems to be legit. It's very hard to tell the difference and it doesn't happen on all movies, but I just thought you should know... Any suggestions/explanation?

[buzzqw]

@Zow

any unknow file will be processed via directshowsource

and since i haven't knowledge of blu-ray/hd-dvd structure , automkv will not be able to work proprely with these files

@cheshire2k
remember the log
also, made the d2v manually and feed automkv with this file

@Encoder888
could be the ITU ?
try encoding (using beta 95) with ITU checked

BHH

[Encoder888]

buzzqw -

I tried using ITU with the 0.93a and it didn't make a difference. Have there been any changes to ITU in 0.95 beta? Oh, and when can we expect the final 0.95 ? :) Thanks.

[buzzqw]

when can we expect the final 0.95 ?

when some serius testing is done...

Have there been any changes to ITU in 0.95 beta

all AR was rewritten.. so.. yes.. maybe you get different result

BHH

[reddragon72]

I just wondered if all worked out !

I suppose there is no chance that you selected a 2-channel AC3.
Some movies, like Lord of the Rings, have a 5.1 surround and a 2-channel main audio track.


:):devil::D
Pascal

I thought of that and I do have the AC3 6ch selected from the DVD and then AC3 and original selected for the rest. I even tried just original since the DVD is already in 6ch AC3, but I get the same results. I haven't had alot of time lately to look at it all, but I am giving full resources to it now, to try and get it straightened out. Even MKV to Dvix is doing the same with a DTS track as the original. I plan on dumping Vista on that machine and making it a full time recoding machine with XP on it.

I'm still having issues with the max bit rate more so and that is more important as I have several movies in HD 1080 that need to me recoded to 720 with less than 6000 bitrate for Xvid. I'm doing this cause the 360 has issues with anything higher than 6000, and that is my main focus right now.

[cheshire2k]

Im sorry for meithering but i dont get why it aint working whne it use to and didnt doo anything other than get the latest files. Ok ive ripped the dvd to iso then virtualdrived the iso to get the ifo then put it into automkv set it up and everything but it never does even fairuse is crappin out on me lately :(.

[buzzqw]

@cheshire2k

rip the dvd in ifo mode, selecting the main movie and only the audio tracks you want

then point automkv to the vts_01_01.vob (or first main vob)

BHH

[Zow]

@Zow

any unknow file will be processed via directshowsource

and since i haven't knowledge of blu-ray/hd-dvd structure , automkv will not be able to work proprely with these files
....
BHH

Thanks, buzzqw. I found a pretty detailed (if scary looking:-) guide to using MEGui to rip Blu-Ray (and any DirectShow-compatible video source, including HD-DVD,) to H246:

http://forum.videohelp.com/topic333634.html

I'd assume I can use AutoMKV to do the same, utilizing its much more user-friendly interface.

I'll try it over the next day or two. Is there anything obvious that pops out which would not work in AutoMKV, so I don't spend a week banging my head against it?

[buzzqw]

.. if it's a matter of opening grf files or m2ts.. i will add to supported input files (forcing directshowsource usage)

BHH

[bigggt]

hi

I still can't get Nero AAc to work but have a work around(although it takes more time)

anyway when you download the nero package is the Neroaacenc the only file i need or do i need some .dll's also

i have tried a few other programs with nero and they don't work either, so i know its something on my system with nero
thanks

[nx6]

@Zow
@Encoder888
could be the ITU ?
try encoding (using beta 95) with ITU checked
BHH

What's ITU?

I have noticed a black border around a couple movies I've watched lately, the player apps all seem to consider it part of the picture itself even though the movie is within it.

[Luke2000]

after encoding the mkv file i cant view the file, although i hear the sound of it... video does not show up.
any ideas?

using mkv container with balanced settings
encoded a private video from .mpeg

thanks in advance

[buzzqw]

@Luke2000

try with vlc

also reinstall haali media splitter and ffdshow tryout

BHH

[Luke2000]

strange thing is i can view other mkv videos but not my own, and i am already using vlc...
any other ideas? (so codecs are correct)

EDIT: no clue WHY but NOW it works - i did not change a bit!

[Nightshiver]

Hey Buzz, I've got another question. I'm just using this movie as an example. I have Rambo: First Blood on DVD. When I play it, I can select this option in VLC:

http://i231.photobucket.com/albums/ee80/whynotco/test1.jpg

But when I keep the 5.1 audio and encode with AutoMKV, it doesn't give the option to use 5.1 surround. It only shows the stereo, mono, and 2 front 2 rear. Why is this?

[buzzqw]

with mpc and ffdshow... how is reported ?

try analysis with avinaptic

BHH

[vorob]

Is there any guide about filters which I can accept for encoding? With picture examples?

[Amir]

Found a few "bugs"

Encoding my 24 DVDs to 264+m4a (nero_enc for audio).

setup

Vista 64 Ultimate
4GB RAM
E4300
2 X SATA HDD

1) I cant seem to batch encodes, always fails with a dialog box telling me it cant find movie.avs (its virtual dub thats complaining)

I have no problems at all if i click the encode button but thats not good if I want to encode a whole disc and I have to keep starting the process, and I cant obviously do overnight encodes.

2) pop-up box goes funny if I change the time.

When I get the popup box with encoding info (per pass), I noticed my time was wrong. I changed it and the fps counter went to 0 and the time left went funny too (-59 hours etc). I put the clock back but it was still "funny". Didn't affect the encode so I guess its only cosmetic.

3) Everytime I get asked about copying a load of files to someplace in my windows dir, this happens when I start the app. If I say OK it fails, if i say NO to copy, all works fine anyway?. I think its some avisynth stuff. Interesting enough automkv never used to work for me (all encodes started and ended instantly I think as some dependency was not installed). After I installed latest vesion of autogk it fixed automkv too! (YAY!)

[zacoz]

Do you have a log from the encode you can post (use CODE tags)? Is it happening on the first job in the batch?

[zacoz]

Have you installed the required items as listed under BIG FAT WARNING in the first post in the thread and are you using the latest 0.93a exe?

[Amir]

Have you installed the required items as listed under BIG FAT WARNING in the first post in the thread and are you using the latest 0.93a exe?

I believe I have. As I said I can encode SINGLE jobs without issue, well all except that issue with mp4box not responding on vista64 but then i'm not the only one with that issue ;-)

Just had a look at the big fat warning, everything listed there would stop encodes, I CAN encode but can't batch them.

I'll try and grab a log (its currently encoding). Will post when its ready to try. Thanks for the response btw.

[Amir]

I believe I have. As I said I can encode SINGLE jobs without issue, well all except that issue with mp4box not responding on vista64 but then i'm not the only one with that issue ;-)

Just had a look at the big fat warning, everything listed there would stop encodes, I CAN encode but can't batch them.

I'll try and grab a log (its currently encoding). Will post when its ready to try. Thanks for the response btw.

Just got back from shopping, I had queued up two jobs, seems the first job finished but there was the mp4box.exe has stopped responding diaglog box, which stopped the second job starting until i clicked OK. The mp4box stalling only happens sometimes, I have a feeling it depends on the profile used for encoding.

[buzzqw]

mp4box isn't perfectly compatible with vista64

i may suggest to update to latest kurnoise13 mp4box build

BHH

[decayd]

Hello,

For some reason I have been getting this error when using AutoMKV (93a)-

"virtualdub error
the function deletecomments was called on a stream[?] that hasn't been previously initialized with setsource"

Would anyone know what would cause this?
I have been using AutoMKV for a while with no problems, maybe a stuffed something on my pc?
I have tried deleting and reinstalling the programme but that did not help.

Thanks.

[buzzqw]

@decayd

First of all Welcome to the Forum


a log could help.. but you could also try the new 0.95 beta

BHH

[survivant001]

@buzzqw

suggestion :

Now that we have a free software to mux to m2ts format. (http://forum.doom9.org/showthread.php?t=134104)

is it possible to add a feature. keep a x% of free space when trying to get the bitrate for the target size.

You told me that I kept 2% , but I'll like to have a textbox. The default could be 2%.

the reason if simple. Look like the overhead when convert mkv to m2ts is around 5-8%. I would like to try starting with 6% :)

like that I want have to edit manually the bitrate calculated by automkv to fit the target in m2ts. All I want it to burn the movie on a DVD5.

[Nightshiver]

Buzzq

Here's the avinaptic of my file. It says 6 channel, but I still do not get the option to use 5.1

Picture: http://i231.photobucket.com/albums/ee80/whynotco/test3.jpg

[zacoz]

@Nightshiver

I think you may find the problem is with VLC not with AutoMKV. I've done some searching on the Videolan forums and there are a number of posts with people having problems playing 5.1 AAC streams.

http://forum.videolan.org/viewtopic.php?f=14&t=42891&hilit=aac+support
http://new-forum.videolan.org/viewtopic.php?f=14&t=38610&p=119405&hilit=aac+5+1+audio&sid=12d32ab4376365e6e940412acb5102be#p119405

There's apparently some issue with the channel mapping. On my tests here it seems that AAC5.1 encoded with NeroAAC is detected by vlc as 2 channel while AAC5.1 encoded with Coding Tech is detected as 8 channel.

Have you tried with another media player?

[buzzqw]

@Nightshiver and zacoz

i suppose that zacoz is right, if avinaptic reports 5.1.. the audio is 5.1

you can also try with media player classic or Mplayer


@survivant001
not in next build (0.95) but probabily in 0.96 i will add support ot m2ts as container (using excellent tsMuxeR)

BHH

[delacroixp]

Picture: AVInaptic test3 (http://i231.photobucket.com/albums/ee80/whynotco/test3.jpg)
I had a look at your AVInaptic screen-shot and it's quite blurry.
If you only want a window screen shot (not fullscreen)... click on window and Alt-PrintScreen (not Ctrl-PrintScreen).
Saving your image in an image editing app like Photoshop will also improve the visual quality exponentially !


:):devil::D
Pascal

[bigggt]

I was looking for a solution to why i can't get neroaacenc.exe to work(with no luck of course) but came accross this guide http://a8t8.spaces.live.com/blog/cns!2518DD508BB713E8!162.entry and was wondering if that 360/Ps3 profile is good.

with the current version of automkv there are seperate 360 and ps3 profiles but one that would play on both systems would be a bonus

so just wondering about the profile and if anyone has any suggestions on how i can get neroaacenc.exe to work.

i have tries the latest versions of automkv and have all the required software from the first post

Great Program

[Ronin-7]

I was looking for a solution to why i can't get neroaacenc.exe to work(with no luck of course) but came accross this guide http://a8t8.spaces.live.com/blog/cns!2518DD508BB713E8!162.entry and was wondering if that 360/Ps3 profile is good.

with the current version of automkv there are seperate 360 and ps3 profiles but one that would play on both systems would be a bonus

so just wondering about the profile and if anyone has any suggestions on how i can get neroaacenc.exe to work.

i have tries the latest versions of automkv and have all the required software from the first post

Great Program

That guide is by me, the PS3/Xbox 360 profile is just the PS3_41 profile already present in AutoMKV but with bframe-pyramids disabled for cross compatibility between the two consoles. The guide is aimed at beginners [like me] so it's just handy to have one profile to take care of both platforms & know that it will work on either.

[Bigmango]

@survivant001
not in next build (0.95) but probabily in 0.96 i will add support ot m2ts as container (using excellent tsMuxeR)

BHH

Awesome :)

Please add ts *and* m2ts as containers. m2ts files are bigger due to more overhead, so it's good to keep the choice.

If you can make it so that we can, i.ex select a dvd5 as target size and it calculates the muxing overhead to get the target bitrate it will be perfect. :)

[Bigmango]

Buzz, what about an avs file as input ? It doesn't work here.

It would be nice to use an avs script with filters, etc... as input. I have been missing this several times already and had to use another tool for the task...

[buzzqw]

Buzz, what about an avs file as input ? It doesn't work here.

... i wil check. thanks!

EDIT: on 0.95 beta is OK! :)

BHH

[cheshire2k]

how does the program work out what bitrate to use while using the filters as when i use the seesaw filter seperate thru virtualdub and it ends up bigger :( any idea is it a calc.

[buzzqw]

automkv will IGNORE any filters used while computing the bitrate.

You set the final size and AutoMKV will compute the bitrate. No more no less :)

BHH

[decayd]

Hi buzzqw

It looks like my problem has gone :)
I ran a registry cleaning program and that seems to have solved the problem, I guess I should remember to keep my windows better maintained.

While I am here, Thanks for making such a great program it is very user friendly.

Thanks.

[buzzqw]

glad to hear :)

feel free to post any problem and suggestion!

BHH

[darbid]

I am new to this stuff - why is it that some of my m2ts files (including the main movie) come up with "no sequence video header" and the DGindex just sits there on the screen.

I think it is a limitation of DGindex - if this is the case which program can i use like this one that does not use DGindex

[Atak_Snajpera]

Your m2ts contains AVC stream instead of mpeg2 therefore DGIndex won't work.

[darbid]

yep that is what I thought - so what are my options then - what can i use like AutoMKV

[Amir]

mp4box isn't perfectly compatible with vista64

i may suggest to update to latest kurnoise13 mp4box build

BHH

thanks for the suggestion, MP4Box-0.4.5-dev is installed with 0.93a of automkv, seems to be the latest, unless you are talking of a newer build thats available somewhere special?. If so please let me have the URL, TIA!

[buzzqw]

@darbid

check on advanced settings "DSS for A/V", in this way you force automkv to use directshowsource on your files

@Amir
this is the latest http://kurtnoise.free.fr/index.php?dir=mp4tools/&file=MP4Box-0.4.5-dev.zip

BHH

[darbid]

Thanks for that, for a beginner that thought he had DVDs etc sorted out I am now in the land of unknown now with BluRay and the many many standards.

i just tried it and it of course stopped DGIndex from starting but now i get a x264 problem i have taken a screen shot of this....

[Cyrus221]

Is there a way to add lines to the command line? I tried adding -threads 2 but it wont let me, its like a locked option in the adv profiles tab

[Bigmango]

... i wil check. thanks!

EDIT: on 0.95 beta is OK! :)

BHH


You rock ! :thanks:

[buzzqw]

@Cyrus221
threads are already maximized for both x264 and xvid , anyway on Advanced Profile Editing there is "# of Thread"

and the add to command line is working here

BHH

[hfmls]

cant mux in latest beta

19:39:52 0.95 beta 21 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
19:39:52 OS Version: Windows XP
19:39:52 Selected Input file: C:\Torrents\The.Brave.One.720p.Bluray.x264-Chakra\Sample\ck-braveone-sample.mkv
19:39:52 Selected Output dir: C:\Torrents\The.Brave.One.720p.Bluray.x264-Chakra\Sample\temp\
19:39:52 Selected Final Name: ck-braveone-sample
19:39:52 Selected Container type: WMV
19:39:52 Selected Encoder: WMV
19:39:52 Selected Size: 36 / 1
19:39:52 Selected Profile: Constant_Quality.xml
19:39:52 Selected Resizer: NONE / Original
19:39:52 Selected Filters: RemoveGrain(mode=2)
19:39:52 Selected Deinterlacer: AUTO
19:39:52 Selected Field Order: AUTO
19:39:52 Track Language 1: ck-braveone-sample.mkv
19:39:52 Audio Codec 1: WMV
19:39:52 Audio Quality 1: 96
19:39:52 Audio Channel 1: Stereo
19:39:52 Track Language 2: NONE
19:39:52 Audio Codec 2: WMV
19:39:52 Load external subtitle file: "C:\Torrents\The.Brave.One.720p.Bluray.x264-Chakra\Sample\ck-braveone-sample.srt"
19:39:52 Advanced Audio Settings DUMP Track 1
19:39:52 Nero Option Profiles: AUTO --- Encoding Mode: Quality
19:39:52 CCT Option Profiles: AUTO --- Channel Options: AUTO
19:39:52 Lame Settings: ABR
19:39:52 Audio Normalization: 1
19:39:52 Frequency: AUTO --- Tempo: NONE --- Pitch: NONE --- Other Add:
19:39:52
19:39:52 Unable to determine movie proprierties , switched to DirectShowSource
19:40:12 Number of Frames: 1289
19:40:12 Framerate: 23.975986
19:40:12 Movie length in Seconds: 54
19:40:12 Movie Width/Height: 1280/528
19:40:12 Number of Frames: 1289
19:40:12 Framerate: 23.975986
19:40:12 Movie length in Seconds: 54
19:40:12 Movie Width/Height: 1280/528
19:40:33 Source is hybrid bff and tff at 0 bff and 0 tff.
19:40:33 Advanced Deinterlace Routines Log
19:40:33 Analyzed 181 sections of five frames
19:40:33 Found Interlace Sections: 0 0.00%
19:40:33 Found Progressive Sections:181 100.00%
19:40:33 Found Telecined Sections: 0 0.00%
19:40:33 Found Zero Mov: 100.00% 181
19:40:33 Found One Mov: 0.00% 0
19:40:33 Found Two Mov: 0.00% 0
19:40:33 Found Three Mov: 0.00% 0
19:40:33 Found Four Mov: 0.00% 0
19:40:33 Found Five Mov: 0.00% 0
19:40:33 The Movie is declared to progressive
19:40:33 Encoding C:\Torrents\The.Brave.One.720p.Bluray.x264-Chakra\Sample\temp\ck-braveone-sample.mkv to WAV , as pre-process to WMV
19:40:50 Encoded 1' Audio Track: 10322316 bytes
19:40:50 WMV CMD: cscript.exe "D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\encoder\WMCmd.vbs" -input "C:\Torrents\The.Brave.One.720p.Bluray.x264-Chakra\Sample\temp\movie.avs" -output "C:\Torrents\The.Brave.One.720p.Bluray.x264-Chakra\Sample\temp\movie.wmv" -v_codec WVC1 -v_mode 2 -v_quality 90 -s_config "C:\Torrents\The.Brave.One.720p.Bluray.x264-Chakra\Sample\temp\wmv_crb" -v_bframedist 1 -v_dquantoption 2 -v_loopfilter 1 -v_buffer 10000 -v_bdeltaqp 1 -v_performance 40 -a_input "C:\Torrents\The.Brave.One.720p.Bluray.x264-Chakra\Sample\temp\audio.wav" -a_codec wmapro -a_mode 0 -title "ck-braveone-sample" -log wmv.log -year 2008 -copyright "Done with AutoMKV! 0.95 beta 21" -a_setting 96_44_2
19:40:53 BREAK ! FILE NOT SUPPORTED ! LAST TRY WITH FFMPEG!
19:40:53 Switched to FFmpeg for Video Encoding!
19:40:53 FFmpeg.exe String: "D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\BeSweet\ffmpeg.exe" -i "C:\Torrents\The.Brave.One.720p.Bluray.x264-Chakra\Sample\ck-braveone-sample.mkv" -vcodec wmv1 -b 5454000 -s 1280x528 -acodec wmav2 -ac 2 -ab 128000 -ar 48000 -r 23.975986 -y "C:\Torrents\The.Brave.One.720p.Bluray.x264-Chakra\Sample\temp\movie.wmv"
19:40:53 Fished FFmpeg Encoding!
19:40:53 Final Muxed size: -1 bytes
19:40:53 Encoding finished: 00:01:01 elapsed time
19:40:53 -----------------------------------------------------------------------
19:40:53 Script AutoCrop.log
19:40:53
19:40:53 Crop(0,0,1280,528)
19:40:53 -----------------------------------------------------------------------
19:40:53 Script movie.avs
19:40:53
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\AddGrain.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\autocrop.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\aWarpSharp(Pruned).dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\blockbuster.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\cnr2.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\ColorMatrix.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\Convolution3D.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\corrector.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\DctFilter.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\Decomb.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\Deen.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\degrainmedian.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\DGDecode.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\EEDI2.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\FFMpegSource.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\FFT3DFilter.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\FluxSmooth.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\frfun7.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\hqdn3d.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\LeakKernelDeint.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\MaskTools.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\medianblur.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\MipSmooth.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\MSharpen.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\mt_masktools.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\mvtools.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\NicAudio.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\RemoveGrainS.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\RepairS.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\SangNom.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\SimpleResize.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\SoundOut.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\TBilateral.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\TDeint.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\TIVTC.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\TomsMoComp.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\TTempSmooth.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\UnDot.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\UnFilter.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\VSFilter.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\warpsharp.dll")
19:40:53 #loadpluginstart
19:40:53
19:40:53 #test1
19:40:53
19:40:53 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\BlindDeHalo3_mt2.avsi")
19:40:53 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\Deblock_QED_MT2.avsi")
19:40:53 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\FastLineDarken 1.3 MT MOD.avsi")
19:40:53 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\HybridFuPP.avsi")
19:40:53 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\LanczosPlus.avsi")
19:40:53 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\Lem.avsi")
19:40:53 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\LimitedSharpenFaster.avsi")
19:40:53 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\MCBob_v03c.avsi")
19:40:53 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\mvbob.avsi")
19:40:53 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\QMlib.avsi")
19:40:53 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\seesaw.avsi")
19:40:53 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\spresso.avsi")
19:40:53 #importstart
19:40:53
19:40:53 #test2
19:40:53
19:40:53 movie = directshowsource("C:\Torrents\The.Brave.One.720p.Bluray.x264-Chakra\Sample\ck-braveone-sample.mkv",fps=23.975986,convertfps=true,audio=false)
19:40:53 movie = isRGB(movie) ? ConvertToYV12(movie,interlaced=true) : movie
19:40:53 movie = isYUY2(movie) ? ConvertToYV12(movie,interlaced=true) : movie
19:40:53 function getOrder(clip c) {
19:40:53 order = GetParity(c) ? 1 : 0
19:40:53 Return order }
19:40:53 #filter1start
19:40:53
19:40:53 #test3
19:40:53
19:40:53 last = movie
19:40:53 fixed_aspect = 2.424242
19:40:53 out_width = 1280
19:40:53 out_height = 528
19:40:53 #resizestart
19:40:53
19:40:53 #test4
19:40:53
19:40:53 #filter2start
19:40:53
19:40:53 #test5
19:40:53
19:40:53 RemoveGrain(mode=2)
19:40:53 -----------------------------------------------------------------------
19:40:53 Script mkvmaudio.avs
19:40:53
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\NicAudio.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\SoundOut.dll")
19:40:53 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\FFmpegSource.dll")
19:40:53 DirectShowSource("C:\Torrents\The.Brave.One.720p.Bluray.x264-Chakra\Sample\ck-braveone-sample.mkv",fps=23.975986,convertfps=true,video=false)
19:40:53 #Applying STEREO downmixing routines
19:40:53 function stereo(clip a)
19:40:53 {
19:40:53 flr = GetChannel(a, 1, 2)
19:40:53 fcc = GetChannel(a, 3)
19:40:53 lfe = GetChannel(a, 4)
19:40:53 lfc = MixAudio(fcc, lfe, 0.2071, 0.2071)
19:40:53 mix = MergeChannels(lfc, lfc)
19:40:53 lrc = MixAudio(flr, mix, 0.2929, 1.0)
19:40:53 blr = GetChannel(a, 5, 6)
19:40:53 Return MixAudio(lrc, blr, 1.0, 0.2929)
19:40:53 }
19:40:53 #
19:40:53 6==Audiochannels() ? stereo() : last
19:40:53 function addvideo(clip c) {
19:40:53 blankclip(length = Int(100 * AudioLengthF(c) / float(audiorate(c))), fps=100)
19:40:53 Return audiodub(last,c)
19:40:53 }
19:40:53 Normalize()
19:40:53
19:40:53 ConvertAudioTo16bit()
19:40:53 Soundout(output="wav",type=1,autoclose=true,filename="audio.wav",showoutput=false)
19:40:53
19:40:53 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -

[Taddeusz]

I've searched through the forums but couldn't find any step-by-step directions. Is there some trick to getting the burning of subtitles to work? I seem to be doing something wrong but I can't figure out what it is. I'm currently using the latest beta.

Personally, I would like to not have to burn subtitles into the video but SageTV currently doesn't support MKV subtitles.

[buzzqw]

@hfmls

crossposting and pirated source

@Taddeusz
Is there some trick to getting the burning of subtitles to work? I seem to be doing something wrong but I can't figure out what it is. I'm currently using the latest beta.

external subtitle ? or from ifo ?

if external load it as usually, then in advanced settings check "burn subtitle"

BHH

[Taddeusz]

external subtitle ? or from ifo ?

if external load it as usually, then in advanced settings check "burn subtitle"

It's from ifo.

I see it extract the subtitles but they don't end up in the final video.

[hfmls]

tried to uninstall, reinstall codecs, reboot, everything.i cant seem to get this to work, mkv to wmv or mp4.allready tried to short the names.it never muxes, it always stops and says job is finished at this point:





00:43:51 0.95 beta 21 - - - - - - - - - - - - - START JOBS - - - - - - - - - - - - - -
00:43:51 OS Version: Windows XP
00:43:51 Selected Input file: C:\sample.mkv
00:43:51 Selected Output dir: C:\temp\
00:43:51 Selected Final Name: sample
00:43:51 Selected Container type: MP4
00:43:51 Selected Encoder: X264
00:43:51 Selected Size: 36 / 1
00:43:51 Selected Profile: 1_Pass_Fastest.xml
00:43:51 Selected Resizer: NONE / Original
00:43:51 Selected Filters: RemoveGrain(mode=2)
00:43:51 Selected Deinterlacer: AUTO
00:43:51 Selected Field Order: AUTO
00:43:51 Track Language 1: sample.mkv
00:43:51 Audio Codec 1: Nero AAC
00:43:51 Audio Quality 1: 0.60
00:43:51 Audio Channel 1: Stereo
00:43:51 Track Language 2: NONE
00:43:51 Audio Codec 2: Nero AAC
00:43:51 Advanced Audio Settings DUMP Track 1
00:43:51 Nero Option Profiles: AUTO --- Encoding Mode: Quality
00:43:51 CCT Option Profiles: AUTO --- Channel Options: AUTO
00:43:51 Lame Settings: ABR
00:43:51 Audio Normalization: 1
00:43:51 Frequency: AUTO --- Tempo: NONE --- Pitch: NONE --- Other Add:
00:43:51
00:43:52 Unable to determine movie proprierties , switched to DirectShowSource
00:44:09 Number of Frames: 1289
00:44:09 Framerate: 23.976044
00:44:09 Movie length in Seconds: 54
00:44:09 Movie Width/Height: 1280/528
00:44:09 Number of Frames: 1289
00:44:09 Framerate: 23.976044
00:44:09 Movie length in Seconds: 54
00:44:09 Movie Width/Height: 1280/528
00:44:40 Source is declared tff by a margin of 1/0.
00:44:40 Advanced Deinterlace Routines Log
00:44:40 Analyzed 181 sections of five frames
00:44:40 Found Interlace Sections: 0 0.00%
00:44:40 Found Progressive Sections:181 100.00%
00:44:40 Found Telecined Sections: 0 0.00%
00:44:40 Found Zero Mov: 100.00% 181
00:44:40 Found One Mov: 0.00% 0
00:44:40 Found Two Mov: 0.00% 0
00:44:40 Found Three Mov: 0.00% 0
00:44:40 Found Four Mov: 0.00% 0
00:44:40 Found Five Mov: 0.00% 0
00:44:40 The Movie is declared to progressive
00:44:40 Encoding C:\temp\sample.mkv to NeroAAC with 0.60 quality
00:45:00 Encoded 1' Audio Track: 1323922 bytes
00:45:00 Starting X264
00:45:00 ABR encoding X264: D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\encoder\x264.exe --bitrate 5386 --progress --keyint 250 --bframes 1 --qpmin 10 --qpmax 51 --no-psnr --ref 1 --filter 0,0 --subme 0 --direct none --vbv-maxrate 25000 --me dia --no-ssim --level 4.1 --merange 8 --nf --no-cabac --no-b-adapt --no-chroma-me --threads auto --thread-input --sar 1:1 --output "C:\temp\movie.264" "C:\temp\movie.avs"
00:46:11 X264 Final ABR Encoding Stats:
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX MMXEXT SSE SSE2 SSE3 SSSE3 Cache64
x264 [info]: slice I:36 Avg QP:11.72 size: 47725
x264 [info]: slice P:1118 Avg QP:14.33 size: 28962
x264 [info]: slice B:135 Avg QP:16.23 size: 15009
x264 [info]: mb I I16..4: 37.4% 0.0% 62.6%
x264 [info]: mb P I16..4: 19.7% 0.0% 37.6% P16..4: 19.4% 6.9% 1.7% 0.0% 0.0% skip:14.7%
x264 [info]: mb B I16..4: 5.3% 0.0% 7.0% B16..8: 83.7% 2.0% 2.0% direct: 0.0% skip: 0.0%
00:46:11 Only Movie Size: 36125080 bytes
00:46:11 "D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\matroska\MP4Box.exe" -add "C:\temp\movie.264":par=2.424242 -add "C:\temp\sample.mp4:lang=und" -fps 23.9760 -new "C:\temp\sample_full.mp4"
00:46:11 Final Muxed size: -1 bytes
00:46:11 Encoding finished: 00:01:11 elapsed time
00:46:11 -----------------------------------------------------------------------
00:46:11 Script AutoCrop.log
00:46:11
00:46:11 Crop(0,0,1280,528)
00:46:11 -----------------------------------------------------------------------
00:46:11 Script movie.avs
00:46:11
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\AddGrain.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\autocrop.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\aWarpSharp(Pruned).dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\blockbuster.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\cnr2.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\ColorMatrix.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\Convolution3D.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\corrector.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\DctFilter.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\Decomb.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\Deen.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\degrainmedian.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\DGDecode.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\EEDI2.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\FFMpegSource.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\FFT3DFilter.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\FluxSmooth.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\frfun7.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\hqdn3d.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\LeakKernelDeint.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\MaskTools.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\medianblur.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\MipSmooth.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\MSharpen.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\mt_masktools.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\mvtools.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\NicAudio.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\RemoveGrainS.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\RepairS.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\SangNom.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\SimpleResize.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\SoundOut.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\TBilateral.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\TDeint.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\TIVTC.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\TomsMoComp.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\TTempSmooth.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\UnDot.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\UnFilter.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\VSFilter.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\warpsharp.dll")
00:46:11 #loadpluginstart
00:46:11
00:46:11 #test1
00:46:11
00:46:11 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\BlindDeHalo3_mt2.avsi")
00:46:11 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\Deblock_QED_MT2.avsi")
00:46:11 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\FastLineDarken 1.3 MT MOD.avsi")
00:46:11 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\HybridFuPP.avsi")
00:46:11 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\LanczosPlus.avsi")
00:46:11 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\Lem.avsi")
00:46:11 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\LimitedSharpenFaster.avsi")
00:46:11 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\MCBob_v03c.avsi")
00:46:11 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\mvbob.avsi")
00:46:11 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\QMlib.avsi")
00:46:11 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\seesaw.avsi")
00:46:11 Import("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\spresso.avsi")
00:46:11 #importstart
00:46:11
00:46:11 #test2
00:46:11
00:46:11 movie = directshowsource("C:\sample.mkv",fps=23.976044,convertfps=true,audio=false)
00:46:11 movie = isRGB(movie) ? ConvertToYV12(movie,interlaced=true) : movie
00:46:11 movie = isYUY2(movie) ? ConvertToYV12(movie,interlaced=true) : movie
00:46:11 function getOrder(clip c) {
00:46:11 order = GetParity(c) ? 1 : 0
00:46:11 Return order }
00:46:11 #filter1start
00:46:11
00:46:11 #test3
00:46:11
00:46:11 last = movie
00:46:11 fixed_aspect = 2.424242
00:46:11 out_width = 1280
00:46:11 out_height = 528
00:46:11 #resizestart
00:46:11
00:46:11 #test4
00:46:11
00:46:11 #filter2start
00:46:11
00:46:11 #test5
00:46:11
00:46:11 RemoveGrain(mode=2)
00:46:11 -----------------------------------------------------------------------
00:46:11 Script mkvmaudio.avs
00:46:11
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\NicAudio.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\SoundOut.dll")
00:46:11 LoadPlugin("D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\filter\FFmpegSource.dll")
00:46:11 DirectShowSource("C:\sample.mkv",fps=23.976044,convertfps=true,video=false)
00:46:11 #Applying STEREO downmixing routines
00:46:11 function stereo(clip a)
00:46:11 {
00:46:11 flr = GetChannel(a, 1, 2)
00:46:11 fcc = GetChannel(a, 3)
00:46:11 lfe = GetChannel(a, 4)
00:46:11 lfc = MixAudio(fcc, lfe, 0.2071, 0.2071)
00:46:11 mix = MergeChannels(lfc, lfc)
00:46:11 lrc = MixAudio(flr, mix, 0.2929, 1.0)
00:46:11 blr = GetChannel(a, 5, 6)
00:46:11 Return MixAudio(lrc, blr, 1.0, 0.2929)
00:46:11 }
00:46:11 #
00:46:11 6==Audiochannels() ? stereo() : last
00:46:11 function addvideo(clip c) {
00:46:11 blankclip(length = Int(100 * AudioLengthF(c) / float(audiorate(c))), fps=100)
00:46:11 Return audiodub(last,c)
00:46:11 }
00:46:11 Normalize()
00:46:11
00:46:11 Soundout(output="cmd",type=1,format=3,autoclose=true,executable="D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\besweet\neroaacenc.exe",prefilename=" -ignorelength -q 0.60 -if - -of audio.mp4",postfilename="",nofilename=true,showoutput=false)
00:46:11
00:46:11 - - - - - - - - - - - - FINISHED JOBS - - - - - - - - - - - - - - - - -

[buzzqw]

@Taddeusz

look at muxing.bat, or launch from dos

is sub/idx present ?

analyze the muxed file with avinaptic , is it reporting any subs stream ?

@hfmls

00:46:11 Only Movie Size: 36125080 bytes
so the file is created BUT

00:46:11 "D:\Documents and Settings\Hélder\Desktop\AutoMKV093_NORIP\exe\matroska\MP4Box.exe" -add "C:\temp\movie.264"ar=2.424242 -add "C:\temp\sample.mp4:lang=und" -fps 23.9760 -new "C:\temp\sample_full.mp4"
00:46:11 Final Muxed size: -1 bytes
the muxing string fail

so try from dos to launch muxing.bat and look at the error
(is sample.mp4 present in temp folder ?)

BHH

[Cyrus221]

I searched the forums and I'm not sure if this is a big bug or not, or if anyone has reported it. On Vista Ultimate AutoMKV93a hangs when processing the first que. After the video is completed and saved, the program completely freezes. After running it again, it seems to work fine and processes all the others ques as normal... its just the first one thats messed up. Not sure if this has been talked about or not... something about 225 pages of forum is quite daunting, lol

[rui.m.godinho]

Why can't I get WMV 5.1 audio with 2_Pass_Better_Quality or 2_Pass_Balanced and just with 1_Pass_High Performance profile ?

TIA :)

[buzzqw]

@Cyrus221

don't know.. don't have Vista to test.. i ask to other Vista users

@rui.m.godinho

me too
wmcmd.vbs seems a little broken for 5.1 audio

BHH

[machser]

Hi, got a problem with Crop section in advanced settings. 'Check Values', 'Preview' and 'Chapter' are greyed out, even when clicking 'Enable Manual Crop and Resize'. Am I doing something wrong or is this function disbaled ? How or when can I use it again ?

[buzzqw]

@machser

have you load your source file ?
(also try with the new 0.95 beta)

BHH

[Amir]

I searched the forums and I'm not sure if this is a big bug or not, or if anyone has reported it. On Vista Ultimate AutoMKV93a hangs when processing the first que. After the video is completed and saved, the program completely freezes. After running it again, it seems to work fine and processes all the others ques as normal... its just the first one thats messed up. Not sure if this has been talked about or not... something about 225 pages of forum is quite daunting, lol

Yes I've had this happen to me too, gone back go single encodes but will try the new mp4box in the URL above tonight to see if I can batch encode with it.