capote

[rosepetal]

I have read the threads and still can't burn capote. i installed a psl2 file using dvd decrypter3.5.4.0 and when i use dvdshrink 3.2 the main movie folder doesn't contain the main movie (only a file that is 1352mb). There is a menus folder and extras folder too, but i can't find the main movie. What am I doing wrong?

[setarip_old]

1) Did you (as you should) use VOBBlanker (or "FixVTS") afterwards to "clean up" the files?

2) As I mentioned in another thread about the Region 1 version of "Capote":From personal experience (I had to exchange "Capote" twice), I know that there are some poorly pressed copies of this Region 1 DVD...

[rosepetal]

Ok, so i didn't, are they free? and where can i download them, and is there somewhere that will tell me how to use them? VOBBlanker (or "FixVTS")

[setarip_old]

Load the rip into VOBBlanker and:

Set an output directory, select "Process all" - and then press the "Process" radiobutton.

The new DVD "package" created by VOBBlanker in your output directory should be processed properly by DVD Shrink....

[rosepetal]

This is the error i got after i tried to process. I guess i am an idiot

--------------TITLE VOB WRITING PHASE STARTED-
VTS 01: Keeping Cell VID/CID: 01/01 --> 01/01
Error opening input VOB: G:\CAPOTE\VIDEO_TS\VTS_01_1.VOB

PostCommands changed into Precommands in 0 PGCs of a total of 0

Finished with ERROR. Process Aborted and not completed

[rosepetal]

does it have anything to do with the fact that i don't see the main movie in shrink?

[setarip_old]

This is the error i got after i tried to process.That looks like you tried to run VOBBlanker BEFORE you installed the PSL2 file and ripped with DVD Decrypter v.3.5.4.

You have to first rip the DVD to your harddrive, using DVDDecrypter v.3.5.4 with the PSL2 file - and then use VOBBlanker on the ripped DVD "package" that's then on your hard drive...

[rosepetal]

Ok, i ripped again with the psl2 file and again this is what i am getting.... ughhhhh

-----------TITLE VOB WRITING PHASE STARTED-
VTS 01: Keeping Cell VID/CID: 01/01 --> 01/01
Error opening input VOB: G:\CAPOTE\VIDEO_TS\VTS_01_1.VOB

PostCommands changed into Precommands in 0 PGCs of a total of 0

Finished with ERROR. Process Aborted and not completed

[setarip_old]

Please post your DVD Decrypter log of your rip using the PSL2 file...

[rosepetal]

I 07:46:10 DVD Decrypter Version 3.5.4.0 started!
I 07:46:10 Microsoft Windows 2000 Professional (5.0, Build 2195 : Service Pack 4)
W 07:46:10 Drive H:\ (FAT32) does not support single files > 4 GB
I 07:46:10 Initialising SPTI...
I 07:46:10 Searching for SCSI / ATAPI devices...
I 07:46:10 Found 1 DVD-ROM and 1 DVD±RW!
W 07:46:20 Possible Structure Protection Found!
W 07:46:20 1 area has been marked as 'suspect'.
W 07:46:20 Dummy sectors will be inserted where necessary.
W 07:46:20 Possible RCE Protection Found!
W 07:46:20 Media region code: 1, 3, 4
W 07:46:33 User selected Region 1 for the disc's region code.

[setarip_old]

That's only the beginning of the log. Please post the ENTIRE log that's generated after you've opened the DVD and imported the PSL2 file into DVD Decrypter v.3.5.4 and selected a location to save the "rip" to and have actually started and completed the "rip"...

[rosepetal]

how? frst, thanks for helping me.
this is what i did. i open dvd decrypter, went to file psl import and imported the psl file from another section on this forum. i then have all of the files selected and rip it. i then get thelog file from the dvd decrypter tab. i am not sure what i am doing wrong

[setarip_old]

Have you selected a "destination folder" and then clicked on the large DVD icon to actually start the ripping?

[rosepetal]

Yes, and the folder is labeled Capote, with another folder inside labeled Video_TS with all files inside

[setarip_old]

Then, if that's the case, you should have a FULL DVD Decrypter log showing, in addition to the portion you previously posted, a list of all of the .IFOs, .BUPs, and .VOBs, as they were being ripped - ending with a line indicating average rip speed and highest rip speed...

By the way, when you imported the PSL2 file into DVD Decrypter v.3.5.4, did it indicate that the PSL2 file was acceptable, or was there a statement to the effect that, "This is not the correct PSL file for this DVD"?

[CWR03]

In order to copy the entire log, click Edit on the log window and Select All, then click Edit again and select Copy. Return to the forum browser, right-click in the text area and select Paste.

[rosepetal]

yes, the psl2 file imported fine.

[setarip_old]

Again, please post the ENTIRE log that's generated after DVD Decrypter has completed ripping the DVD to your hard drive...

[rosepetal]

I 14:02:28 DVD Decrypter Version 3.5.4.0 started!
I 14:02:28 Microsoft Windows 2000 Professional (5.0, Build 2195 : Service Pack 4)
W 14:02:28 Drive H:\ (FAT32) does not support single files > 4 GB
I 14:02:28 Initialising SPTI...
I 14:02:28 Searching for SCSI / ATAPI devices...
I 14:02:28 Found 1 DVD-ROM and 1 DVD±RW!
W 14:02:33 Possible Structure Protection Found!
W 14:02:33 1 area has been marked as 'suspect'.
W 14:02:33 Dummy sectors will be inserted where necessary.
W 14:02:33 Possible RCE Protection Found!
W 14:02:33 Media region code: 1, 3, 4
W 14:02:34 User selected Region 1 for the disc's region code.
W 14:02:41 Protected Sectors List Imported Successfully!
W 14:02:41 1 area has been marked as 'suspect'.
W 14:02:41 Dummy sectors will be inserted where necessary.
I 14:02:44 Operation Started!
I 14:02:44 Source Device: [1:0:0] SONY DVD RW DRU-710A BY02 (D:) (ATA)
I 14:02:44 Source Media Type: DVD-ROM
I 14:02:44 Source Media Region Code: 1, 3, 4
I 14:02:44 Source Media Copyright Protection System Type: CSS/CPPM
I 14:02:44 Source Media Implementation Identifier: Daikin U.S. Comtec Lab
I 14:02:44 Destination Folder: F:\capote\
I 14:02:44 File Splitting: By File
I 14:02:44 Read Speed: MAX
I 14:02:44 Remove Structure Protection: Yes
I 14:02:44 Bad Sector Removal Method: Normal
I 14:02:44 Detect Mastering Errors: No
I 14:02:44 Multi Angle Processing: No
I 14:02:44 Remove Macrovision Protection: Yes
I 14:02:44 Stream Processing: No
I 14:02:45 Copying VTS_01_0.IFO... (LBA: 85159 - 85203) - KEY: N/A
I 14:02:45 Decrypting VTS_01_1.VOB... (LBA: 115142 - 639428) - KEY: CB 21 C3 F4 48
E 14:03:06 Failed to read Sector 123621 - L-EC Uncorrectable Error
E 14:03:07 Failed to decrypt VTS_01_1.VOB!
I 14:03:07 Decrypting VTS_01_2.VOB... (LBA: 639429 - 1163715) - KEY: CB 21 C3 F4 48
I 14:06:09 Decrypting VTS_01_3.VOB... (LBA: 1163716 - 1688002) - KEY: CB 21 C3 F4 48
I 14:08:26 Decrypting VTS_01_4.VOB... (LBA: 1688003 - 2212289) - KEY: CB 21 C3 F4 48
I 14:10:44 Decrypting VTS_01_5.VOB... (LBA: 2212290 - 2736576) - KEY: CB 21 C3 F4 48
I 14:12:28 Decrypting VTS_01_6.VOB... (LBA: 2736577 - 2751001) - KEY: CB 21 C3 F4 48
I 14:12:31 Operation Successfully Completed! - Duration: 00:09:46
I 14:12:31 Average Read Rate: 7,235 KB/s (5.2x) - Maximum Read Rate: 11,249 KB/s (8.1x)

[setarip_old]

Since you state that the PSL2 file was imported successfully, I'd speculate that you have a poorly pressed DVD. As I said in Post #2 in this thread,From personal experience (I had to exchange "Capote" twice), I know that there are some poorly pressed copies of this Region 1 DVD...I'd suggest you return the DVD to the place of purchase, in exchange for a new replacement...

[dc45]

Try FixVTS on your rip. It's easy to use. Just drag and drop one the VOB's, click full disk, process in place. Has worked every time for me.

[setarip_old]

@dc45

Hi!

I'm fairly certain that "FixVTS" cannot resolve the problem described:E 14:03:06 Failed to read Sector 123621 - L-EC Uncorrectable Error
E 14:03:07 Failed to decrypt VTS_01_1.VOB!

[blutach]

Instead of doing the process manually, have you tried the PgcEdit (http://www.videohelp.com/~r0lZ/pgcedit/index.html) plugin wizard?

See Kill ARccOS in my signature.

Click here to install all required programs (http://forum.digital-digest.com/showthread.php?t=58318).

Regards

[lastman]

dvd fab will copy any dvd (film) except damaged ones of cause / i have never had one problem

[BillB]

Don't like the flic but have to learn how to copy it! Just because!

Did every trick posted here, but still cannot get a copy.
Tried plane old DVDD, Rit4M,DVDFab,Nero8,ImgBurn, and several other pg's but no go!

Incoming Disk is Sony brand

Out going it Tayudin

don't have any problems with other flics.

Suggestions please!

[setarip_old]

@BillB

Hi!

As I stated earlier in this thread:

From personal experience (I had to exchange "Capote" twice), I know that there are some poorly pressed copies of this Region 1 DVD...

I'd suggest you return the DVD to the place of purchase, in exchange for a new replacement...

[cdanddvdpublisher]

@BillB

Hi!

As I stated earlier in this thread:

From personal experience (I had to exchange "Capote" twice), I know that there are some poorly pressed copies of this Region 1 DVD...

I'd suggest you return the DVD to the place of purchase, in exchange for a new replacement...

For what it's worth, this isn't the first thread where I've found people who have struggled with ripping Capote. I'd take the above advice - return the disc for a replacement then try it again.