Mplayer crashes

[kopavel]

with this (http://kopavel.times.lv/scareme.wmv ) clip mplayer (celtic last compile) crash
WMP work, old compile too. :(

[LoRd_MuldeR]

with this (http://kopavel.times.lv/scareme.wmv ) clip mplayer (celtic last compile) crash
WMP work, old compile too. :(

I also noticed that the latest celtic build of of MPlayer/MEncoder is broken :(

Try the latest one from this site:
http://oss.netfarm.it/mplayer-win32.php

[celtic_druid]

Another crash that I can't reproduce. Next compile I will leave SSE/SSE2 disabled for all CPU's other than AMD64. Maybe that will help?

[Yong]

afaik the ffmpeg wma decoder is buggy, try adding -afm dmo to the cli, this will switch to the wma dmo decoder.

[LoRd_MuldeR]

Another crash that I can't reproduce. Next compile I will leave SSE/SSE2 disabled for all CPU's other than AMD64. Maybe that will help?

The latest K7 build by Gianluigi Tiesi works fine for me (AthlonXP, 32-Bit WinXP)

MEncoder Sherpya-MinGW-20060312-4.1.0 (C) 2000-2006 MPlayer Team
CPU: Advanced Micro Devices Sempron/Athlon MP/XP/XP-M Barton,Thorton
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx


Gianluigi Tiesi:
the only difference would be [B]sse but it's not usable on windows due to lack of memalign function, sse code should be 16 byte aligned or it will crash.

[celtic_druid]

No crashes here, including when I tried the XP build.

That is why I enabled SSE/SSE2. I tried to get it to crash, but couldn't.

Next XP build will have SSE disabled.

[kopavel]

player krashes in all WMV clips, at work i have crashes in P3, at home in AthlonXP, but AVI play normal, only WMV crashes...

[LoRd_MuldeR]

No crashes here, including when I tried the XP build.

That is why I enabled SSE/SSE2. I tried to get it to crash, but couldn't.

Next XP build will have SSE disabled.

Good work. New build seems to be fine again :thanks:

One question: Is there a way to check which revision of x264 is used in MEncoder ???

[celtic_druid]

Pretty sure that it displays it somewhere when you encode with it. The last build contains rev468 anyway.

or not. Maybe it is XviD that displays version info?

[LoRd_MuldeR]

Pretty sure that it displays it somewhere when you encode with it. The last build contains rev468 anyway.

or not. Maybe it is XviD that displays version info?

Seems like x264 does't output the info. Must be XviD then...

> Pass 1 of 2

MEncoder dev-CVS-060316-21:45-4.0.2 (C) 2000-2006 MPlayer Team
CPU: Advanced Micro Devices Sempron/Athlon MP/XP/XP-M Barton,Thorton (Family: 6, Stepping: 0)
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE

91 audio & 206 video codecs
Setting process priority: belownormal
success: format: 0 data: 0x0 - 0x183ae80e
MPEG-PS file format detected.
VIDEO: MPEG2 720x576 (aspect 2) 25.000 fps 12000.0 kbps (1500.0 kbyte/s)
[V] filefmt:2 fourcc:0x10000002 size:720x576 fps:25.00 ftime:=0.0400
Opening video filter: [expand osd=1]
Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
Opening video filter: [scale w=640 h=384]
Opening video filter: [crop w=690 h=425]
Crop: 690 x 425, -1 ; -1
Opening video filter: [kerndeint=10:0:0:0:0]
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 720 x 576 (preferred colorspace: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try adding the scale filter, e.g. -vf spp,scale instead of -vf spp.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b
Selected video codec: [mpeg12] vfm: libmpeg2 (MPEG-1 or 2 (libmpeg2))
==========================================================================
VDec: vo config request - 720 x 576 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.

SwScaler: Lanczos scaler, from Planar YV12 to Planar YV12 using MMX2
Pos: 0.0s 2f ( 0%) 0.00fps Trem: 0min 0mb A-V:0.000 [0:0]
x264 [info]: using SAR=83/80
x264 [info]: using cpu capabilities MMX MMXEXT SSE 3DNow!

1 duplicate frame(s)!
Writing header...
ODML: vprp aspect is 16384:9475.
Writing header...
ODML: vprp aspect is 16384:9475.
Pos: 0.0s 5f ( 0%) 0.00fps Trem: 0min 0mb A-V:0.000 [0:0]
Writing header...
ODML: vprp aspect is 16384:9475.
Pos: 256.6s 6420f (99%) 4.01fps Trem: 0min 37mb A-V:0.000 [1211:0]

Flushing video frames
Writing index...
Writing header...
ODML: vprp aspect is 16384:9475.

Video stream: 1211.053 kbit/s (151381 B/s) size: 38868731 bytes 256.760 secs 6420 frames
x264 [info]: slice I:75 Avg QP:22.36 size: 24848
x264 [info]: slice P:3978 Avg QP:24.39 size: 7560
x264 [info]: slice B:2365 Avg QP:26.42 size: 2929
x264 [info]: mb I I16..4: 30.2% 59.5% 10.3%
x264 [info]: mb P I16..4: 12.2% 10.9% 1.7% P16..4: 34.3% 11.1% 4.3% 0.2% 0.1% skip:25.2%
x264 [info]: mb B I16..4: 0.4% 0.7% 0.2% B16..8: 26.5% 1.3% 3.1% direct: 7.0% skip:60.8%
x264 [info]: final ratefactor: 21.90
x264 [info]: 8x8 transform intra:45.5% inter:61.0%
x264 [info]: ref P 78.3% 10.7% 5.6% 3.0% 2.4%
x264 [info]: ref B 88.4% 6.6% 2.8% 1.3% 0.9%
x264 [info]: kb/s:1211.1

[foxyshadis]

Does mencoder's x264 write the version & command line to the header, like x264 cli?

[LoRd_MuldeR]

Does mencoder's x264 write the version & command line to the header, like x264 cli?

I just checked that in the Hex-Editor and the answer is: Yes :)

x264 - core 45 svn-468 - H.264/MPEG-4 AVC codec - Copyleft 2005 - http://www.videolan.org/x264.html - options: cabac=1 ref=5 deblock=1:0:0 analyse=0x3:0x133 me=umh subme=6 brdo=1 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 chroma_qp_offset=0 slices=1 nr=20 bframes=3 b_pyramid=1 b_adapt=1 b_bias=0 direct=1 wpredb=1 bime=1 keyint=250 keyint_min=25 scenecut=40 rc=2pass bitrate=1200 ratetol=1.0 rceq='blurCplx^(1-qComp)' qcomp=0.60 qpmin=10 qpmax=51 qpstep=2 cplxblur=20.0 qblur=0.5 ip_ratio=1.40 pb_ratio=1.30