PDA

View Full Version : *burn error* (dvd shrink) need help...

Sinfulcurves_RPG-7
8th March 2006, 09:24
ugh! problem after problem, now I have a new one. I'm getting this message...

http://img16.imagevenue.com/loc123/th_06220_burn_error.JPG (http://img16.imagevenue.com/img.php?loc=loc123&image=06220_burn_error.JPG)

I was trying to burn the movie *Jarhead* I think it stopped at the 40% mark...

anyone know why it's doing this? I don't think it's the movie cos I've tried 2 in a row (diff movies) and I don't think it's the DVD-R's, cos these always work (Memorex 16X Sony)

could it be a hardware prob? I hope not...

There a LOT of text on the burn error, I saved it.. if anyone knows what it means, I can paste it... I have no idea
Sinfulcurves_RPG-7
8th March 2006, 10:15
edited nero serial#
setarip_old
8th March 2006, 19:40
Disc Manufacturer ID: CMC.MAG.Try using higher quality media - and burn at a lower speed, such as 4X...
CWR03
8th March 2006, 20:24
It appears to be a power calibration error - burning at a lower speed may resolve it.

You may also want to edit your Nero serial number out of the first line of your log post.
setarip_old
8th March 2006, 21:00
Not a very significant point but, if NERO detects a power calibration error it generates a specific line in the log that states, "Power Calibration Error" (There is none in the log presented in this thread)...
Sinfulcurves_RPG-7
8th March 2006, 23:01
spanx for info, guys.
im gonna try writing at a lower speed right and report back... but last night before i gave up, I got this new text, it didn't even wanan burn, stayed at 0%
Sinfulcurves_RPG-7
8th March 2006, 23:03
edit...
setarip_old
9th March 2006, 01:44
1) You have once again posted a NERO log that includes your SERIAL NUMBER. You should remove it from the post...

2) This new log does, in fact, specifically mention a "Power Calibration Error". According to the NERO/Ahead site's explanation of errors:

"9. I get a 'Power calibration error' or 'Calibration area (almost) full' error message. Why?

Power Calibration is controlled by the recorder.

Before any write operation, all recorders must do a 15 step power test to determine the optimum power for writing to the CD; this is called "Optimum Power Calibration"(OPC). During the write, it continues to do this test to get the best write throughout the whole CD; this is called "Running Optimum Power Calibration" (ROPC).
This whole process is controlled by the recorder, though initiated by programs such as Nero. There is an area on the inner part of the CD for the test and test data info to be stored. You can use this area up to 999 times.

If you receive the "Power calibration error" or "Power calibration area is (amost) full" error message, the cause will be either poor media, poor power, or a defective recorder.

Please try the following solutions:

Update the firmware of your recorder. Please check the manufacturer's website for the latest version.
Try another brand of CD-R or CD-RW media.
Try different power connectors, and for recorders, do not share power with other devices. It needs its own power connector. If the error occurs with an external recorder, the power source in the chassis could be the cause. As a test, try to take the recorder out of the external chassis and connect it internal.
Try different configurations, such as taking the CD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master.
Send the recorder in for service."


Additionally, it appears that your burner is not capable of the bitsetting that you are apparently attempting Drive: SONY DVD RW DRU-800A
Book Type request [LO]: DVD-ROM
Unknown Book Type request for driveAnd, once again, try using higher quality media and burn at a lower speed (such as 4X)...
Sinfulcurves_RPG-7
9th March 2006, 02:21
I removed it

Well, the burning at 4X Failed!! It doesn't even go at all, stays at 0%...

I've never had any probs til now. I don't think its the movies, or DVD-R's, I've been burning movies for months & months, using the same DVD-R's (Sony, Memorex) they and DVDShrink have always worked til now... I think it's a hardware issue? I've had this for close to a year, I think.

My player is internal, I dunno how to take it out, I had it installed at Circuit City.

Is there another program you can recommend? I dunno if its DVDShrink, but I'm curious if it'll run, or run into the same error, if it does... I think it might be the burner itself.
setarip_old
9th March 2006, 03:23
I've been burning movies for months & monthsYou might want to try running a DVD/CD cleaning disc on your burner. Maxell makes one that sells for approximately $10US...

Actually you've deleted both logs in their entirety, rather than just removing the serial number from each...
Sinfulcurves_RPG-7
9th March 2006, 03:46
http://shopping.msn.com/results/shp/?bCatId=4683,av=2-123001

which one is it on here? do they sell it at bestbuy, circiut city?

Hmm, I wasn't sure where the nero # was, too much txt, I can try running another burn, though

so you think this cleaner might work? just needs a cleaning, you don't think it's the burner that's going bad?
setarip_old
9th March 2006, 06:08
so you think this cleaner might work? just needs a cleaning, you don't think it's the burner that's going bad?If you run the DVD/CD cleaning disc on your burner and things begin to work properly again, you'll know that your problem was likely a dirt/grime problem. If your burner still doesn't work properly after running the DVD/CD cleaning disc on it, you'll know that your problem is likely not simply a dirt/grime problem...
CWR03
9th March 2006, 17:40
SinfulCurves_RPG-7, it wasn't necessary to remove your entire log - it may have been useful to someone else with the same problem. The only point of concern I had was the serial number itself on the first line, which as it turns out is a universal code for Nero bundled with Sony drives.

setarip_old, you have once again corrected me when it wasn't warranted. I investigated a relevant portion of SinfulCurves_RPG-7's original log file, which specifically indicated a power calibration error despite the fact there was no actual line of text indicating such error.
feedback
9th March 2006, 18:48
Her logs have been deleted so I don't know what is going on with her problem exactly.

@Sinfulcurves_RPG-7
Your log should look something like the example below with the serial# removed. It is in the very first section BTW.
Also, Memorex is very iffy media. They use several manufacturers for their disks...Prodisc for one, Yuk!
You should try a free program something like 'DVD Identifier' to always know the make of your disks.
Get DVD Identifier at the link below:

http://www.videohelp.com/tools?tool=350

====== *** NeroAPI, History File *** ======
Nero Serial Removed

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 18/06/2003 12:25:03 AM
Nero version: 6.0.0.20 (Nero Express)
Recorder: <TOSHIBA ODD-DVD SD-R6372>Version: 1730 - HA 1 TA 0 - 6.0.0.20
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <TOSHIBA ODD-DVD SD-R6372>Version: 1730 - HA 1 TA 0 - 6.0.0.20
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HTS548080M9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-R6372 atapi Port 1 ID 0 DMA: On


Regards,:)
Sinfulcurves_RPG-7
9th March 2006, 22:22
Hiya all,

:( :( That clean thing didn't work at all! I keep getting is burn error. here's the log:
Sinfulcurves_RPG-7
10th March 2006, 04:58
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 9:35:32 AM
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-800A> Version: KY01 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : ST360020A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-800A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616F atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SONY DVD RW DRU-800A D: CDRom0
SAMSUNG DVD-ROM SD-616F E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522764kB)
Free physical memory: 76MB (78236kB)
Memory in use : 85 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.3.2006
NeroAPI
8:06:29 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

8:06:30 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

8:06:30 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

8:06:30 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

8:06:30 PM #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-800A running

8:06:30 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

8:06:30 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

8:06:30 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

8:06:30 PM #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

8:07:57 PM #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)

8:07:57 PM #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

8:07:57 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: SONY DVD RW DRU-800A, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

8:07:57 PM #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not writeable. Insert writeable disc.
(Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)

8:07:57 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [SONY DVD RW DRU-800A]
--------------------------------------------------------------

8:07:57 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-800A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286144 | lead-out | 1 | 0x41 | 0x00

8:07:58 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

8:07:58 PM #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

8:07:58 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

8:07:59 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 16x (22,160 KB/s)

8:07:59 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:07:59 PM #21 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

8:07:59 PM #22 Text 0 File DVDPlusRW.cpp, Line 648
Start write address at LBA 0
DVD high compatibility mode: Yes

8:10:11 PM #23 SCSI -1106 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00C70000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

8:10:11 PM #24 CDR -1106 File Writer.cpp, Line 311
Power calibration error

8:10:11 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

8:10:11 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

8:10:11 PM #27 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders

8:10:12 PM #28 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully

8:10:12 PM #29 Text 0 File DVDR.cpp, Line 5323
Drive: SONY DVD RW DRU-800A
Book Type request [LO]: DVD-ROM
Unknown Book Type request for drive

8:10:12 PM #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 16x (22,160 KB/s)

8:10:12 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

8:10:12 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 6/8/2005 8:43:04 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
setarip_old
10th March 2006, 06:15
Yet again, try using higher quality media and burn at a lower speed, such as 4X...

And undo the setting for using "bitsetting"Drive: SONY DVD RW DRU-800A
Book Type request [LO]: DVD-ROM
Unknown Book Type request for drive as it appears your drive is not capable of using it...
Sinfulcurves_RPG-7
10th March 2006, 06:49
what do you mean uncapable of using, why would it suddenly stop that capability?

yet again, I've told you the 4X doesn't work!! It stays at 0%! I've had better luck before running at max.

where is bitsetting under?
feedback
10th March 2006, 07:25
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not writeable. Insert writeable disc.

Try a different media as has been suggested.


You can try 'Backup to an ISO' with Shrink, then burn using the freeware program ImgBurn. It is more forgiving of iffy media. I personally use ImgBurn to burn my backups.

Get it at the link below:

http://download.imgburn.com/SetupImgBurn_1.2.0.0.exe
Sinfulcurves_RPG-7
19th March 2006, 00:35
heya guys, im still havin probs with burning stuff, i haven't been on much, but i decided to give it another try today. I got this log. can anyone help?

*********************************************


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 9:35:32 AM
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-800A> Version: KY01 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : ST360020A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-800A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616F atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SONY DVD RW DRU-800A D: CDRom0
SAMSUNG DVD-ROM SD-616F E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522764kB)
Free physical memory: 97MB (99564kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

18.3.2006
NeroAPI
5:27:36 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

5:27:36 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

5:27:36 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

5:27:37 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

5:27:37 PM #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-800A running

5:27:37 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

5:27:37 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

5:27:38 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

5:27:38 PM #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

5:27:38 PM #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1936559 (430:20.59, 3782MB)

5:27:38 PM #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

5:27:38 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: SONY DVD RW DRU-800A, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

5:27:38 PM #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:27:38 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1936560 (1936560) = #1936560/430:20.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1936560 blocks [SONY DVD RW DRU-800A]
--------------------------------------------------------------

5:27:39 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-800A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3966074880, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1936560 | lead-out | 1 | 0x41 | 0x00

5:27:41 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

5:27:41 PM #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

5:27:41 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

5:27:42 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)

5:27:42 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:27:42 PM #21 Text 0 File DVDR.cpp, Line 2216
Recording mode: Sequential Recording Mode

5:27:42 PM #22 Text 0 File Mmc.cpp, Line 21241
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

5:27:42 PM #23 Text 0 File DVDR.cpp, Line 2362
Start write address at LBA 0
DVD high compatibility mode: Yes

5:27:42 PM #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

5:27:42 PM #25 Text 0 File DVDR.cpp, Line 5323
Drive: SONY DVD RW DRU-800A
Book Type request [LO]: DVD-ROM
Book Type setting not supported for the loaded disc type

5:28:31 PM #26 Text 0 File Cdrdrv.cpp, Line 1287
17:28:31.187 - SONY DVD RW DRU-800A\H1 T0 : Queue again later

5:30:59 PM #27 SCSI -1046 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00D60000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x19 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

5:30:59 PM #28 CDR -1046 File Writer.cpp, Line 311
Illegal disc

5:30:59 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

5:31:00 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

5:31:00 PM #31 Text 0 File DVDR.cpp, Line 2625
EndDAO: Last written address was 6623

5:31:00 PM #32 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)

5:31:00 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

5:31:00 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 6/8/2005 8:43:04 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
setarip_old
19th March 2006, 03:31
AgainAnd undo the setting for using "bitsetting"
Quote:
Drive: SONY DVD RW DRU-800A
Book Type request [LO]: DVD-ROM
Unknown Book Type request for drive

as it appears your drive is not capable of using it...
Sinfulcurves_RPG-7
19th March 2006, 03:38
why all of a sudden it isn't capable? what exactly has happened, how can i get it back to working?

like i had said in earlier posts, i've been burning dvds for close to a year now, now all of a sudden i'm getting these messages...

ps: if anyone wants to chat, help... message me on yahoo instant messenger.
sinfulcurves_ak74m
CWR03
19th March 2006, 11:05
The media you're using (SONY08 - D1) appears to be DVD-R. Bitsetting is only necessary with DVD+R media.
Sinfulcurves_RPG-7
20th March 2006, 00:56
I've always used DVD-R's to record dvd's... I don't understand
CWR03
20th March 2006, 08:14
Either you're mistaken about the media you've been using or you haven't always had bitsetting enabled. It shouldn't be hard to understand - the solution has been pointed out to you numerous times.
setarip_old
21st March 2006, 02:59
1) Your burner may be dying (re-read what I posted regarding NERO's definitions of "power calibration error")

OR

2) If you're lucky, your burner may benefit from running a DVD/CD cleaning disc on it. Maxell makes one that sells for approximately $10US
ww
8th April 2006, 15:24
Get it at the link below:
http://download.imgburn.com/SetupImgBurn_1.2.0.0.exe

Access Denied! Hmmm...? Bummer
setarip_old
9th April 2006, 02:10
@WW

Hi!

Try the following link:

http://imgburn.com/download/SetupImgBurn_1.2.0.0.exe

or

http://imgburn.com/
LIGHTNING UK!
10th April 2006, 20:47
Yeah, don't direct link to the file, visit the site like all non leechers should do!