The dreaded 0006 error again

[Jack'n'xbox]

Hi all

I just got this error 0006, that framcount thing again. I’m trying to back up a music DVD. The last time 3 times that I had this error all were a music DVD???

I did a search and yes I’m using the latest of Fab and of DVD-RB. And is there no other way of fixing this then what Kimagure-No-Ken (http://forum.doom9.org/showthread.php?t=96613&highlight=0006)had said to try?

Thank you

[neuron2]

here's a new one Please read and follow forum rules, specifically, rule 9: use a proper thread title. Thank you.

[Jack'n'xbox]

Please read and follow forum rules, specifically, rule 9: use a proper thread title. Thank you.

Thanks for the help

[jdobbs]

What version of DVD-RB are you using?

[neuron2]

Thanks for the help There's your second strike for rule 11. Wanna try for that third one?

[Jack'n'xbox]

What version of DVD-RB are you using?

I just got your update now and will give it a try.

Can you tell me where I could vent about some over zealous modes? He’s even PM ing me more warnings.:angry:


HELP!

Soon I won’t be able to post, where do I go then? :scared:

Update: Tryed 1.06 and I recived the same error...sorry

[manono]

You didn't follow a simple request to adhere to the rules, renaming your thread title to be more descriptive. Doing so might encourage more people to read the thread if they think they can help. In addition, you were insulting in your response. You were given a break on the second one, in my opinion, because a Rule 4 violation is a double strike, and you would have been out of here to think it over for 30 days.

You still haven't renamed the thread. You deserved what you got in my opinion. If you feel you've been struck unfairly, you can appeal to Doom9, the final arbiter:

http://forum.doom9.org/sanctions.htm

[Jack'n'xbox]

Ok I just figured out how to edit the title. I did not know how to do this at first or that it was possible.

I did not come here for this; all I wanted was some help. A push in the right direction, not a kick out the door.


Thank you for the link.

[smitbret]

I've been trying to get a rebuild without that error using DVD-RB (regardless of the encoder used i.e. CCE or HC) for awhile now. Everybody keeps telling me that my system is unstable or that I'm getting bad rips. I even bought a new power supply cuz I thought that might be the problem. Well, what eventually worked for me was dropping back to DVD-RB Pro v1.03 and using CCE v2.67.00.27. Instantly no more dropped frames. I've been unable to get clean a rebuild without dropped frames since v1.04. I have tried uninstalling the programs, then doing Registry clean-ups, then completely formatting my HDD and reinstalling the OS on more than one occasion. I have ripped with DVDFab, DVD Shrink, Nero Recode, DVD Decrypter and all of them with and without several different versions of AnyDVD running in the background. I have run Memory Tests and defragmented hard drives until my eyes fall out of my head, but the only program that refused to run 100% effectively was DVD-RB versions 1.04+. There is something in there that just doesn't like my system and I'm not the only one judging by the increasing number of posts on miscellaneous boards like this one. There is no doubt in my mind that there is some kind of bug in the later versions of DVD-RB. Luckily, 1.03 does the job just as well. I'd try it with a different encoder, but if it ain't broke I ain't fixin' it. You may want to see if J Dobbs will send you one of the old versions.
-Brett

[gobama05]

v1.06 is working flawlessly. Cheers :D

[smitbret]

Just upgraded from v1.03 to v1.06 and encoded a couple of DVDs, neither had any dropped frames. It's looking like it's been fixed. I'll reinstall a newer version of CCE and see what happens tonite.
-Brett

v1.06 is working flawlessly. Cheers :D

[lantern]

I just received the ERROR 0006: DVD-RB has found framecount differences between the Prepare and Rebuild phases. Aborting

I click OK and DVD-RB shuts down. I am using DVD-RB 1.06.1 and the latest CCE 2.70.01.08. I am trying to backup The Cave R1 NTSC.
Here is the ini file:

[Options]
Mode=1
OneClick=0
ReduceOpt=0
NoWarn=1
AdditionalOutput=1
LogFile=1
QuEncHQ=1
EncoderMinimized=1
RemoveDTS=1
HC_Quality=1
HC_Matrix=1
SkinVersion=12
CCE=2
Skin=Teck Original
AudioDub=1
QuEncodeType=0
iDCT=0
GOP=0
DCPrec=0
MainMatrix=Encoder Default
LowMatrix=Same as Main Feature
VLowMatrix=Same as Main Feature
ExtraMatrix=Same as Main Feature
ProCoder_Quality=4
DVD_Label=THE_CAVE
DVD_Name=THE_CAVE.ISO
MovieOnly=2
HalfD1=000000000000
Convert_16_9=000000000000
DisableInterlace=000000000000
ConvertToYUY2=1
ISO_Output=1
ISO_Delete_Option=1
Decrypter_Write=1
Delete_Image_Option=0
HalfExtras=0
Completed=29
ITU_Aspect=1
HalfD1Extras=0
[Paths]
QuEnc=C:\Program Files\DVD-RB PRO\Encoders\QuEnc\QuEnc.exe
ReJig=C:\Program Files\DVD-RB PRO\Encoders\ReJig\ReJig.exe
HC=C:\Program Files\DVD-RB PRO\Encoders\HC Encoder\HCbatch.EXE
DECOMB=C:\Program Files\AviSynth 2.5\plugins\Decomb521.dll
MPEG2DEC=C:\Program Files\DVD-RB PRO\DGDecode.dll
Working=G:\Temp\
Output=G:\
CCEBasic=C:\Program Files\Custom Technology\Cinema Craft Encoder Basic\cct2.exe
CCENEW=
Source=G:\THE_CAVE\VIDEO_TS\
[Audio]
Selected=10111111
Remapping=
[Subpictures]
Selected=100100100100
[CCEOptions]
VBR_bias=15
Quality_prec=32
eclPasses=4
[Setup]
Languages=1111111111111111111111110111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
sLanguages=1111111111111111111111110111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111


Here is the log:
[19:18:00] Phase I, PREPARATION started.
- CCE 2.70.1.8 encoder selected.
- "Movie and Menus Only" mode is enabled.
- VTS_01: 360,232 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 33,636 frames.
-- Building .AVS and .ECL files
- VTS_02: 2,153,869 sectors.
-- Scanning and writing .D2V & .AVS files
-- Embedded null records found
-- Processed 140,017 frames.
-- Building .AVS and .ECL files
- VTS_03: 198,450 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 18,952 frames.
-- Building .AVS and .ECL files
- VTS_04: 32,659 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 2,584 frames.
-- Building .AVS and .ECL files
- VTS_05: 30,366 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 2,359 frames.
-- Building .AVS and .ECL files
- VTS_06: 47,576 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 3,616 frames.
-- Building .AVS and .ECL files
- VTS_07: 38,545 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 3,082 frames.
-- Building .AVS and .ECL files
- VTS_08: 47,301 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 4,442 frames.
-- Building .AVS and .ECL files
- VTS_10: 31,063 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 2,390 frames.
-- Building .AVS and .ECL files
- VTS_11: 31,712 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 2,905 frames.
-- Building .AVS and .ECL files
- VTS_12: 30,927 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 2,265 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 71.4%
- Overall Bitrate : 4,158/3,326Kbs
- Space for Video : 3,662,068KB
- Blanking all EXTRA Segments
-- Feature before/after: 5,229 / 5,229 Kbs
[19:21:52] Phase I, PREPARATION completed in 3 minutes.
[19:24:30] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_02 segment 0
- Creating M2V for VTS_02 segment 1
- Creating M2V for VTS_02 segment 2
- Creating M2V for VTS_02 segment 3
- Creating M2V for VTS_02 segment 4
- Creating M2V for VTS_02 segment 5
- Creating M2V for VTS_02 segment 6
- Creating M2V for VTS_02 segment 7
- Creating M2V for VTS_02 segment 8
- Creating M2V for VTS_02 segment 9
- Creating M2V for VTS_02 segment 10
- Creating M2V for VTS_02 segment 11
- Creating M2V for VTS_02 segment 12
- Creating M2V for VTS_02 segment 13
- Creating M2V for VTS_02 segment 14
- Creating M2V for VTS_02 segment 15
- Creating M2V for VTS_02 segment 16
- Creating M2V for VTS_02 segment 17
- Creating M2V for VTS_02 segment 18
- Creating M2V for VTS_02 segment 19
- Creating M2V for VTS_02 segment 20
- Creating M2V for VTS_02 segment 21
- Creating M2V for VTS_02 segment 22
- Creating M2V for VTS_02 segment 23
- Creating M2V for VTS_02 segment 24
- Creating M2V for VTS_02 segment 25
- Creating M2V for VTS_02 segment 26
- Creating M2V for VTS_02 segment 27
- Creating M2V for VTS_02 segment 28
- Creating M2V for VTS_02 segment 29
- Creating M2V for VTS_02 segment 30
- Creating M2V for VTS_02 segment 31
- Creating M2V for VTS_02 segment 32
- Creating M2V for VTS_02 segment 33
- Creating M2V for VTS_02 segment 34
- Creating M2V for VTS_02 segment 35
- Creating M2V for VTS_02 segment 36
- Creating M2V for VTS_02 segment 37
- Creating M2V for VTS_02 segment 38
- Creating M2V for VTS_02 segment 39
- Creating M2V for VTS_02 segment 40
- Creating M2V for VTS_03 segment 0
- Creating M2V for VTS_03 segment 1
- Creating M2V for VTS_04 segment 0
- Creating M2V for VTS_04 segment 1
- Creating M2V for VTS_05 segment 0
- Creating M2V for VTS_05 segment 1
- Creating M2V for VTS_06 segment 0
- Creating M2V for VTS_06 segment 1
- Creating M2V for VTS_07 segment 0
- Creating M2V for VTS_07 segment 1
- Creating M2V for VTS_08 segment 0
- Creating M2V for VTS_08 segment 1
- Creating M2V for VTS_10 segment 0
- Creating M2V for VTS_10 segment 1
- Creating M2V for VTS_11 segment 0
- Creating M2V for VTS_11 segment 1
- Creating M2V for VTS_12 segment 0
- Creating M2V for VTS_12 segment 1
[20:31:53] Phase II ENCODING completed in 67 minutes.
[20:40:32] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Processing VTS_02
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8

[jdobbs]

Interesting. I did that disc ("The Cave", NTSC, R1) with no issues at all. What did you use to rip it?

[lantern]

I tried just rebuilding from the disc with AnyDVD running in the background. When that didn't work, I ripped with DD & AnyDVD. It still didn't work. I ran the latest FixVTS on the ripped files and tried again and it still didn't work. I tried recode and that seems to have worked.

[jdobbs]

I'll run it again and see if anything has changed. I think I used v1.06 when I did the test encode of that DVD. Hmm... I hope it isn't a bug in the new CCE... I just downloaded that yesterday. I'll use that one when I test also.

[lantern]

I started trying to backup using DVD-RB 1.06 and CCE 2.70.01.07 and had the same error. Then I checked email and saw that there was a new version of both and installed them. I hoped that the problem would go away. No such luck though.

[gobama05]

Hmmm, have you tried ripping the disc with DVDFab Decrypter? Give this a try, it has worked for me on some of the more "difficult" discs. Hope this helps

[lantern]

I am not sure that it is a ripping problem since recode loaded the file alright. I think that if it were a ripping problem recode would have choked also.

[jdobbs]

Apples and Oranges... you can't make that assumption.

I just noticed something strange. DVD Decrypter over AnyDVD gives a "This is not normal" warning at the end of the disc....

Well I just did an initial test with ReJig to see if anything was noticably abnormal. It went through works fine. I'll run it with CCE Basic now.

[Fishman0919]

I had the same pb's w/DD and AnyDVD.. but with DVDFab no pb's.

[gobama05]

Yeah, I normally use DVDFab Decrypter because it works well. If it ain't broke, why fix it? I know it's an old saying, but there's some wisdom in whoever said that :)

[jdobbs]

@lantern

Ok... I don't know what to tell you. I just:

1. Ripped with DVD Decrypter with AnyDVD running. (Got a warning -- continued) (The Cave, NTSC, R1)
2. Set up to use CCE Basic v2.70.01.08
3. Set to Movie and Menus only mode.
4. Ran the entire DVD in One-Click mode.

It completed in 101 minutes. I tested it. Everything is fine.

You have to be leaving something out.... are you doing any preprocessing?

[lantern]

I did no preprocessing. I will just start from scratch again.

Thanks

[jdobbs]

Here's my log:

[16:01:04] Phase I, PREPARATION started.
- CCE 2.70.1.8 encoder selected.
- "Movie and Menus Only" mode is enabled.
- VTS_01: 360,232 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 33,636 frames.
-- Building .AVS and .ECL files
- VTS_02: 2,153,869 sectors.
-- Scanning and writing .D2V & .AVS files
-- Embedded null records found
-- Processed 140,047 frames.
-- Building .AVS and .ECL files
- VTS_03: 198,450 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 18,952 frames.
-- Building .AVS and .ECL files
- VTS_04: 32,659 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 2,584 frames.
-- Building .AVS and .ECL files
- VTS_05: 30,366 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 2,359 frames.
-- Building .AVS and .ECL files
- VTS_06: 47,576 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 3,616 frames.
-- Building .AVS and .ECL files
- VTS_07: 38,545 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 3,082 frames.
-- Building .AVS and .ECL files
- VTS_08: 47,301 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 4,442 frames.
-- Building .AVS and .ECL files
- VTS_09: 10,435 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 1,033 frames.
-- Building .AVS and .ECL files
- VTS_10: 31,063 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 2,390 frames.
-- Building .AVS and .ECL files
- VTS_11: 31,712 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 2,905 frames.
-- Building .AVS and .ECL files
- VTS_12: 30,927 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 2,265 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 71.5%
- Overall Bitrate : 4,156/3,325Kbs
- Space for Video : 3,678,542KB
- Blanking all EXTRA Segments
-- Feature before/after: 5,252 / 5,252 Kbs
[16:07:20] Phase I, PREPARATION completed in 6 minutes.
[16:07:20] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_02 segment 0
- Creating M2V for VTS_02 segment 1
- Creating M2V for VTS_02 segment 2
- Creating M2V for VTS_02 segment 3
- Creating M2V for VTS_02 segment 4
- Creating M2V for VTS_02 segment 5
- Creating M2V for VTS_02 segment 6
- Creating M2V for VTS_02 segment 7
- Creating M2V for VTS_02 segment 8
- Creating M2V for VTS_02 segment 9
- Creating M2V for VTS_02 segment 10
- Creating M2V for VTS_02 segment 11
- Creating M2V for VTS_02 segment 12
- Creating M2V for VTS_02 segment 13
- Creating M2V for VTS_02 segment 14
- Creating M2V for VTS_02 segment 15
- Creating M2V for VTS_02 segment 16
- Creating M2V for VTS_02 segment 17
- Creating M2V for VTS_02 segment 18
- Creating M2V for VTS_02 segment 19
- Creating M2V for VTS_02 segment 20
- Creating M2V for VTS_02 segment 21
- Creating M2V for VTS_02 segment 22
- Creating M2V for VTS_02 segment 23
- Creating M2V for VTS_02 segment 24
- Creating M2V for VTS_02 segment 25
- Creating M2V for VTS_02 segment 26
- Creating M2V for VTS_02 segment 27
- Creating M2V for VTS_02 segment 28
- Creating M2V for VTS_02 segment 29
- Creating M2V for VTS_02 segment 30
- Creating M2V for VTS_02 segment 31
- Creating M2V for VTS_02 segment 32
- Creating M2V for VTS_02 segment 33
- Creating M2V for VTS_02 segment 34
- Creating M2V for VTS_02 segment 35
- Creating M2V for VTS_02 segment 36
- Creating M2V for VTS_02 segment 37
- Creating M2V for VTS_02 segment 38
- Creating M2V for VTS_02 segment 39
- Creating M2V for VTS_02 segment 40
- Creating M2V for VTS_02 segment 41
- Creating M2V for VTS_03 segment 0
- Creating M2V for VTS_03 segment 1
- Creating M2V for VTS_04 segment 0
- Creating M2V for VTS_04 segment 1
- Creating M2V for VTS_05 segment 0
- Creating M2V for VTS_05 segment 1
- Creating M2V for VTS_06 segment 0
- Creating M2V for VTS_06 segment 1
- Creating M2V for VTS_07 segment 0
- Creating M2V for VTS_07 segment 1
- Creating M2V for VTS_08 segment 0
- Creating M2V for VTS_08 segment 1
- Creating M2V for VTS_09 segment 0
- Creating M2V for VTS_09 segment 1
- Creating M2V for VTS_10 segment 0
- Creating M2V for VTS_10 segment 1
- Creating M2V for VTS_11 segment 0
- Creating M2V for VTS_11 segment 1
- Creating M2V for VTS_12 segment 0
- Creating M2V for VTS_12 segment 1
[17:26:02] Phase II ENCODING completed in 79 minutes.
[17:26:03] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Processing VTS_02
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8
- Rebuilding seg 8 VOBID 1 CELLID 9
- Rebuilding seg 9 VOBID 1 CELLID 10
- Rebuilding seg 10 VOBID 1 CELLID 11
- Rebuilding seg 11 VOBID 1 CELLID 19
- Rebuilding seg 12 VOBID 1 CELLID 20
- Rebuilding seg 13 VOBID 1 CELLID 21
- Rebuilding seg 14 VOBID 1 CELLID 22
- Rebuilding seg 15 VOBID 1 CELLID 23
- Rebuilding seg 16 VOBID 1 CELLID 24
- Rebuilding seg 17 VOBID 1 CELLID 25
- Rebuilding seg 18 VOBID 1 CELLID 26
- Rebuilding seg 19 VOBID 1 CELLID 27
- Rebuilding seg 20 VOBID 1 CELLID 28
- Rebuilding seg 21 VOBID 1 CELLID 29
- Rebuilding seg 22 VOBID 1 CELLID 30
- Rebuilding seg 23 VOBID 1 CELLID 31
- Rebuilding seg 24 VOBID 1 CELLID 32
- Rebuilding seg 25 VOBID 1 CELLID 33
- Rebuilding seg 26 VOBID 1 CELLID 34
- Rebuilding seg 27 VOBID 1 CELLID 35
- Rebuilding seg 28 VOBID 1 CELLID 36
- Rebuilding seg 29 VOBID 1 CELLID 37
- Rebuilding seg 30 VOBID 1 CELLID 38
- Rebuilding seg 31 VOBID 1 CELLID 39
- Rebuilding seg 32 VOBID 1 CELLID 40
- Rebuilding seg 33 VOBID 1 CELLID 41
- Rebuilding seg 34 VOBID 1 CELLID 42
- Rebuilding seg 35 VOBID 1 CELLID 43
- Rebuilding seg 36 VOBID 1 CELLID 44
- Rebuilding seg 37 VOBID 1 CELLID 45
- Rebuilding seg 38 VOBID 1 CELLID 46
- Rebuilding seg 39 VOBID 1 CELLID 47
- Rebuilding seg 40 VOBID 1 CELLID 48
- Rebuilding seg 41 VOBID 1 CELLID 49
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_02_0.IFO
- Updating TMAP table...
- Processing VTS_03
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_03_0.IFO
- Updating TMAP table...
- Processing VTS_04
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_04_0.IFO
- Updating TMAP table...
- Processing VTS_05
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_05_0.IFO
- Updating TMAP table...
- Processing VTS_06
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_06_0.IFO
- Updating TMAP table...
- Processing VTS_07
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_07_0.IFO
- Updating TMAP table...
- Processing VTS_08
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_08_0.IFO
- Updating TMAP table...
- Processing VTS_09
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_09_0.IFO
- Updating TMAP table...
- Processing VTS_10
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_10_0.IFO
- Updating TMAP table...
- Processing VTS_11
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_11_0.IFO
- Updating TMAP table...
- Processing VTS_12
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_12_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
- Building ISO Image...
- ISO Image successfully created.
[17:42:43] Phase III, REBUILD completed in 16 minutes.

Done.
[17:42:43] PREPARE/ENCODE/REBUILD completed in 101 min.BTW: Is this movie any good? I've had it sitting on my bookshelf since the day it came out... too many movies, too little time. But I just keep buying them... I think I may have an "collectors obsession." :)

[Rippraff]

The only difference I can see, VTS_09 is missing in lantern's example. And as a result of course slightly different bitrate results.

Cu Rippraff

[jdobbs]

Hmmm... I forgot that I was doing some tests earlier and had vts_min_size=1 in my INI file.

[Rippraff]

That was my first thought but then I was wondering if vts_min_size will be ignored in "movie and menu only" mode, as you don't want other stuff in your backup except the movie and the menu?

Cu Rippraff

[lantern]

I haven't watched it yet. I was going to watch it tonight! I hope it isn't crap.