Incorrect output size

[CrisCr0ss]

OK i wanted to backup Alien (DVD9) i ripped it using dvd decrypter and anydvd, i used the rokas(srry for spelling) options for the setup of the cce and dvdrebuilder but after the prepare phase, encode phase and rebuild phase the final output is 2.17GB original input 7.58 GB.

Any Idea what the problem is?




[Options]
Mode=1
OneClick=1
ReduceOpt=2
NoWarn=1
AdditionalOutput=1
LogFile=1
QuEncHQ=1
EncoderMinimized=1
RemoveDTS=1
HC_Quality=1
HC_Matrix=1
CCE=3
SkinVersion=9
Skin=Rockas Original
QuEncodeType=0
DVD_Label=ALIEN
DVD_Name=ALIEN.ISO
MovieOnly=0
HalfD1=00000
Convert_16_9=00000
DisableInterlace=00000
Completed=1
AVSFilter01=Undot().Deen()
[Paths]
QuEnc=C:\Program Files\DVD-RB\Encoders\QuEnc\QuEnc.exe
ReJig=C:\Program Files\DVD-RB\Encoders\ReJig\ReJig.exe
HC=C:\Program Files\DVD-RB\Encoders\HC Encoder\HCbatch.EXE
ProCoder=C:\Program Files\DVD-RB\Encoders\EclPro\EclPro.exe
DECOMB=C:\Program Files\AviSynth 2.5\plugins\Decomb521.dll
MPEG2DEC=C:\Program Files\AviSynth 2.5\plugins\MPEG2Dec3dg.dll
Working=D:\DVD\WORK\
Output=D:\DVD\OUT\
CCENew=C:\Program Files\Custom Technology\CCE SP Trial Version\cctsp.exe
Source=D:\DVD\ALIEN\ALIEN\
[CCEOptions]
VBR_bias=25
Quality_prec=16
eclPasses=3
[Audio]
Selected=1101111111
[Subpictures]
Selected=100


Thanks would like to clear this because once i get this issue resolved i will be able to batch encode a bunch of backups.

[jdobbs]

A good guess is that you aren't configured properly and the encodes are black screens with orange lines across the bottom (video error messages from AVISYNTH that are distorted because they aren't the right screen resolution).

1. What version of DVD Rebuilder are you using?
2. Did you use the installer? If not, please do. Installing the components by hand is prone to error.

Actually, looking at your INI, I can see that you didn't use the Installer (because you are using "mpg2dec3dg.dll" and the installer uses "dgdecode.dll").

Look here to find the lastest fully installable version:

http://forum.doom9.org/showthread.php?t=75452

[Rippraff]

Look here to find the lastest fully installable version:
But that's only the free version, he's using the Pro/VIP, like MovieOnly=, HC= tells you. Anyway CrisCr0ss should give more (basic) informations. ;)

@CrisCr0ss
Do you have both UnDot.dll and Deen.dll stored in your C:\Program Files\AviSynth 2.5\plugins\ folder? If not get them here. (http://www.avisynth.org/warpenterprises/)

Cu Rippraff

[jdobbs]

If he's using the Pro version he would have access to the Installer in his notification e-mail, then...

I did ask for a version...

[CrisCr0ss]

i did use the installer, and then i right away encoded with not much tweaking and the output became smaller than it was supposed to also if you look at the ini

AVSFilter01=Undot().Deen()

however im not sure if their properly installed.. I just placed undot.dll and deen.dll into the avisynth/plugins folder

[Rippraff]

Why is it so hard to tell, which version you're using?
And if you just placed the Plugins in your folder, then your small output probably says there's no function called Undot. ;)

Cu Rippraff

[CrisCr0ss]

then your small output probably says there's no function called Undot

sorry but what does that mean?

also sorry forget to mention version number its 1.01 final pro

[markrb]

First you may want to get your upgrade to 1.02.
The link to the files and key should have been emailed to you a little while back.
Retry and report back.

Mark

[CrisCr0ss]

damn email notifer !!!! gonna chk as soon as i get home..

[jdobbs]

You couldn't have used the installer... the installer doesn't even have MPEG2DEC3dg.dll included in the package, and that is the decoder you have set as your default. It also installs UNDOT and DEEN so you wouldn't have to place them anywhere.

[ztrmils]

I just did a backup that output 4.42GB instead of the usual 4.32. This was with Pro version 1.02. I used the same exact settings I've used many times. Full backup, HC best mode.

[Options]
Mode=5
OneClick=0
ReduceOpt=4
NoWarn=1
AdditionalOutput=1
LogFile=1
QuEncHQ=1
EncoderMinimized=1
RemoveDTS=0
HC_Quality=3
HC_Matrix=1
CCE=1
SkinVersion=9
Skin=Teck Original
QuEncodeType=0
DVD_Label=CAFE
DVD_Name=CAFE.ISO
HalfD1=000
Convert_16_9=000
DisableInterlace=000
HalfExtras=1
Completed=30
Backcolor=14215660
MovieOnly=0
HC_VBR_Bias=20
HC_OPV=0
ISO_Output=0
ISO_Delete_Option=0
Decrypter_Write=0
Disable_32k_Padding=0
ProCoder_Quality=4
[Paths]
QuEnc=D:\Program Files\DVD-RB PRO\Encoders\QuEnc\QuEnc.exe
ReJig=D:\Program Files\DVD-RB PRO\Encoders\ReJig\ReJig.exe
HC=D:\Program Files\DVD-RB PRO\Encoders\HC Encoder\HCbatch.EXE
ProCoder=D:\Program Files\DVD-RB PRO\Encoders\EclPro\EclPro.exe
DECOMB=D:\Program Files\AviSynth 2.5\plugins\Decomb521.dll
MPEG2DEC=D:\Program Files\DVD-RB PRO\DGDecode.dll
Working=D:\dvd-working\
Output=D:\DVD-OUTPUT\
CCENew=D:\Program Files\Custom Technology\CCE SP Trial Version\cctspt.exe
Source=D:\DVD\CAFE\VIDEO_TS\
[Audio]
Selected=111
[Subpictures]
Selected=1111
[CCEOptions]
VBR_bias=25
Quality_prec=16
eclPasses=2

[blutach]

Tried ripping it without AnyDVD? Go back to basics and rip it properly with just DVD Decrypter. LUK! has said many times having DVD43 and AnyDVD working with DVD Decrypter causes havoc.

However, if you MUST have an extra security blanket, you can get AnyDVD running reliably with DVD Decrypter by using the ElbyCDIO interface instead of the SPTI.

Regards

[CrisCr0ss]

Ok it worked blutach i think you were right, i updated my dvdrb and ripped using dvd fab [free] and it seemed to have worked, i cant really say if it was ur method or the fact that i updated.. anyways its solved thanks again guys..

[Penecho]

I have nearly the same Probloem, with DVD-RB 0.96. Tried to backup THE O.C. S01D1 and have a outputsize from about 2,2GB. I iunstalled it with the installer!!

[Options]
Mode=1
OneClick=1
ReduceOpt=0
NoWarn=1
AdditionalOutput=1
LogFile=1
QuEncHQ=1
EncoderMinimized=1
RemoveDTS=0
HC_Quality=1
HC_Matrix=1
SkinVersion=3
HalfD1=000
Convert_16_9=000
DisableInterlace=000
CCE=1
Completed=1
[Paths]
QuEnc=G:\DVD-RB\Encoders\QuEnc\QuEnc.exe
ReJig=G:\DVD-RB\Encoders\ReJig\ReJig.exe
HC=G:\DVD-RB\Encoders\HC Encoder\HCbatch.EXE
ProCoder=G:\DVD-RB\Encoders\EclPro\EclPro.exe
DECOMB=C:\Programme\AviSynth 2.5\plugins\Decomb521.dll
MPEG2DEC=G:\DVD-RB\DGDecode.dll
Working=G:\DVD - WORK FOLDER\DVD1\
Output=G:\DVD - OUTPUT FOLDER\DVD1\
Source=G:\DVD\THE O.C. S01D1\
CCENEW=C:\Programme\Cinema Craft Encoder SP v2.67.00.27\cctsp.exe
[CCEOptions]
OPV=0
VBR_bias=30
Quality_prec=24
eclPasses=6
[Audio]
Selected=1101
[Subpictures]
Selected=11111111111111

LOG:


[23:43:51] One Click encoding activated...
-----------------
[23:43:52] Phase I, PREPARATION started.
- VTS_01: 3.566.448 sectors.
-- Scanning and writing .D2V file
-- Processed 255.100 frames.
-- Building .AVS and .ECL files
- VTS_02: 51.914 sectors.
-- Scanning and writing .D2V file
-- Processed 6.828 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 56,2%
- Overall Bitrate : 2.937Kbs
- Space for Video : 3.756.848KB
- HIGH/LOW/AVERAGE Cell Bitrates: 4.915/819/2.937 Kbs
[23:52:58] Phase I, PREPARATION completed in 9 minutes.
[23:52:58] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_02 segment 0
- Creating M2V for VTS_02 segment 1
- Creating M2V for VTS_02 segment 2
- Creating M2V for VTS_02 segment 3
- Creating M2V for VTS_02 segment 4
- Creating M2V for VTS_02 segment 5
- Creating M2V for VTS_02 segment 6
- Creating M2V for VTS_02 segment 7
- Creating M2V for VTS_02 segment 8
- Creating M2V for VTS_02 segment 9
- Creating M2V for VTS_02 segment 10
- Creating M2V for VTS_02 segment 11
- Creating M2V for VTS_02 segment 12
- Creating M2V for VTS_02 segment 13
- Creating M2V for VTS_02 segment 14
- Creating M2V for VTS_02 segment 15
- Creating M2V for VTS_02 segment 16
- Creating M2V for VTS_02 segment 17
- Creating M2V for VTS_02 segment 18
- Creating M2V for VTS_02 segment 19
- Creating M2V for VTS_02 segment 20
- Creating M2V for VTS_02 segment 21
- Creating M2V for VTS_02 segment 22
- Creating M2V for VTS_02 segment 23
- Creating M2V for VTS_02 segment 24
- Creating M2V for VTS_02 segment 25
- Creating M2V for VTS_02 segment 26
- Creating M2V for VTS_02 segment 27
- Creating M2V for VTS_02 segment 28
- Creating M2V for VTS_02 segment 29
[02:38:52] Phase II ENCODING completed in 166 minutes.
[02:38:52] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Rebuilding segment 1 VOBID: 1 CELLID: 2
- Rebuilding segment 2 VOBID: 1 CELLID: 3
- Rebuilding segment 3 VOBID: 1 CELLID: 4
- Rebuilding segment 4 VOBID: 1 CELLID: 5
- Rebuilding segment 5 VOBID: 1 CELLID: 6
- Updating NAVPACKS for VOBID_01
- Rebuilding segment 6 VOBID: 2 CELLID: 1
- Rebuilding segment 7 VOBID: 2 CELLID: 2
- Rebuilding segment 8 VOBID: 2 CELLID: 3
- Rebuilding segment 9 VOBID: 2 CELLID: 4
- Rebuilding segment 10 VOBID: 2 CELLID: 5
- Rebuilding segment 11 VOBID: 2 CELLID: 6
- Updating NAVPACKS for VOBID_02
- Rebuilding segment 12 VOBID: 3 CELLID: 1
- Rebuilding segment 13 VOBID: 3 CELLID: 2
- Rebuilding segment 14 VOBID: 3 CELLID: 3
- Rebuilding segment 15 VOBID: 3 CELLID: 4
- Rebuilding segment 16 VOBID: 3 CELLID: 5
- Rebuilding segment 17 VOBID: 3 CELLID: 6
- Updating NAVPACKS for VOBID_03
- Rebuilding segment 18 VOBID: 4 CELLID: 1
- Rebuilding segment 19 VOBID: 4 CELLID: 2
- Rebuilding segment 20 VOBID: 4 CELLID: 3
- Rebuilding segment 21 VOBID: 4 CELLID: 4
- Rebuilding segment 22 VOBID: 4 CELLID: 5
- Rebuilding segment 23 VOBID: 4 CELLID: 6
- Updating NAVPACKS for VOBID_04
- Rebuilding segment 24 VOBID: 5 CELLID: 1
- Updating NAVPACKS for VOBID_05
- Rebuilding segment 25 VOBID: 6 CELLID: 1
- Updating NAVPACKS for VOBID_06
- Rebuilding segment 26 VOBID: 7 CELLID: 1
- Updating NAVPACKS for VOBID_07
- Rebuilding segment 27 VOBID: 8 CELLID: 1
- Updating NAVPACKS for VOBID_08
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Processing VTS_02
- Reading/processing TMAP table...
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Rebuilding segment 1 VOBID: 1 CELLID: 2
- Rebuilding segment 2 VOBID: 1 CELLID: 3
- Rebuilding segment 3 VOBID: 1 CELLID: 4
- Rebuilding segment 4 VOBID: 1 CELLID: 5
- Rebuilding segment 5 VOBID: 1 CELLID: 6
- Rebuilding segment 6 VOBID: 1 CELLID: 7
- Rebuilding segment 7 VOBID: 1 CELLID: 8
- Rebuilding segment 8 VOBID: 1 CELLID: 9
- Rebuilding segment 9 VOBID: 1 CELLID: 10
- Rebuilding segment 10 VOBID: 1 CELLID: 11
- Rebuilding segment 11 VOBID: 1 CELLID: 12
- Rebuilding segment 12 VOBID: 1 CELLID: 13
- Rebuilding segment 13 VOBID: 1 CELLID: 14
- Rebuilding segment 14 VOBID: 1 CELLID: 15
- Rebuilding segment 15 VOBID: 1 CELLID: 16
- Rebuilding segment 16 VOBID: 1 CELLID: 17
- Rebuilding segment 17 VOBID: 1 CELLID: 18
- Rebuilding segment 18 VOBID: 1 CELLID: 19
- Rebuilding segment 19 VOBID: 1 CELLID: 20
- Rebuilding segment 20 VOBID: 1 CELLID: 21
- Rebuilding segment 21 VOBID: 1 CELLID: 22
- Rebuilding segment 22 VOBID: 1 CELLID: 23
- Rebuilding segment 23 VOBID: 1 CELLID: 24
- Rebuilding segment 24 VOBID: 1 CELLID: 25
- Rebuilding segment 25 VOBID: 1 CELLID: 26
- Rebuilding segment 26 VOBID: 1 CELLID: 27
- Updating NAVPACKS for VOBID_01
- Rebuilding segment 27 VOBID: 2 CELLID: 1
- Updating NAVPACKS for VOBID_02
- Rebuilding segment 28 VOBID: 3 CELLID: 1
- Updating NAVPACKS for VOBID_03
- Rebuilding segment 29 VOBID: 4 CELLID: 1
- Updating NAVPACKS for VOBID_04
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_02_0.IFO
- Updating TMAP table...
Correcting VTS Sectors...
[02:52:36] Phase III, REBUILD completed in 14 minutes.

Done.
[02:52:36] PREPARE/ENCODE/REBUILD completed in 189 min.



What can I do??


Cu

[jdobbs]

@Penecho

There are some "tailored" versions of CCE v2.67 that use different ECL parameters than others... that's probably the problem in your case. I'd suggest you upgrade or use HC.

[jdobbs]

@CrisCr0ss

What trial version of CCE are you using?

[CrisCr0ss]

cce 2.70 trial... wrkd great... cant member if i mentioned it but i had fixed it by reinstalling and re ripping..

[Penecho]

I reinstalled DVD-RB, but still the same problem :(

I'm using Cinema Craft Encoder SP v2.67.00.27 and it worked the times befor, but after re-installing WinXP and the encoder, it won't work :(




Cu

[Rippraff]

If you are working with the trial version you have to use Eclcce for older CCE versions, if I remember correctly.

Cu Rippraff

[Penecho]

it's not the Trial Version



Cu