Problem with Bewitched

[jellygumbo]

It appears I have run into a movie I cannot backup? I recently purchased a movie, Bewitched, and tried to back it up but I keep getting errors Below is a copy of the log - 10% finished before erroring out:

I also attached the error in jpg format file.



I 05:04:45 DVD Decrypter Version 3.5.4.0 started!
I 05:04:45 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 05:04:45 Initialising SPTI...
I 05:04:45 Searching for SCSI / ATAPI devices...
I 05:04:45 Found 1 DVD-ROM and 1 DVD±RW!
W 05:04:48 Possible Structure Protection Found!
W 05:04:48 1 area has been marked as 'suspect'.
W 05:04:48 Dummy sectors will be inserted where necessary.
I 05:05:45 Operation Started!
I 05:05:45 Source Device: [0:1:0] SAMSUNG DVD-ROM SD-616E F501 (D:) (ATA)
I 05:05:45 Source Media Type: DVD-ROM
I 05:05:45 Source Media Region Code: 1
I 05:05:45 Source Media Copyright Protection System Type: CSS/CPPM
I 05:05:45 Source Media Implementation Identifier: SONY DVD Video
I 05:05:45 Destination Folder: C:\DVD Burn\BEWITCHED\
I 05:05:45 File Splitting: By File
I 05:05:45 Remove Structure Protection: Yes
I 05:05:45 Bad Sector Removal Method: Normal
I 05:05:45 Detect Mastering Errors: No
I 05:05:45 Multi Angle Processing: No
I 05:05:45 Remove Macrovision Protection: Yes
I 05:05:45 Stream Processing: No
I 05:05:45 Copying VIDEO_TS.IFO... (LBA: 379290 - 379304) - KEY: N/A
I 05:05:46 Decrypting VIDEO_TS.VOB... (LBA: 379322 - 389232) - KEY: C0 75 9C A2 09
I 05:05:49 Copying VIDEO_TS.BUP... (LBA: 389242 - 389256) - KEY: N/A
I 05:05:49 Copying VTS_01_0.IFO... (LBA: 389274 - 389290) - KEY: N/A
I 05:05:49 Decrypting VTS_01_0.VOB... (LBA: 389291 - 389307) - KEY: C0 75 9C A2 09
I 05:05:49 Decrypting VTS_01_1.VOB... (LBA: 389308 - 684668) - KEY: C0 75 9C A2 09
I 05:07:12 Copying VTS_01_0.BUP... (LBA: 684669 - 684685) - KEY: N/A
I 05:07:12 Copying VTS_02_0.IFO... (LBA: 684686 - 684725) - KEY: N/A
I 05:07:12 Decrypting VTS_02_0.VOB... (LBA: 684726 - 729179) - KEY: D5 CA 6F 01 9D
I 05:07:24 Decrypting VTS_02_1.VOB... (LBA: 729180 - 1253466) - KEY: D5 CA 6F 01 9D
E 05:14:33 Failed to read Sector 737513 - Unrecovered Read Error
E 05:14:34 Failed to decrypt VTS_02_1.VOB!
I 05:14:37 Decrypting VTS_02_2.VOB... (LBA: 1253467 - 1777753) - KEY: D5 CA 6F 01 9D

[neuron2]

Please follow forum rules, specifically, rule 9: use a proper thread title. Thank you. :readrule:

[jellygumbo]

Sorry...I changed the title.

[Imperial Zeppelin]

It's a Sony disc so guess what? ARccOS is involved. I used DVDFAB Decrypter on it last night with no hassles after DVD Decrypter puked on it just like yours did.

[andyfav]

follow this link

http://club.cdfreaks.com/showthread.php?t=153419
or
try with PSL2 generator
or
try with PSL2 plugin for PGCEDIT.

:D :D :devil: :devil:

[ROSCO1167]

It appears I have run into a movie I cannot backup? I recently purchased a movie, Bewitched, and tried to back it up but I keep getting errors Below is a copy of the log - 10% finished before erroring out:

I also attached the error in jpg format file.



I 05:04:45 DVD Decrypter Version 3.5.4.0 started!
I 05:04:45 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 05:04:45 Initialising SPTI...
I 05:04:45 Searching for SCSI / ATAPI devices...
I 05:04:45 Found 1 DVD-ROM and 1 DVD±RW!
W 05:04:48 Possible Structure Protection Found!
W 05:04:48 1 area has been marked as 'suspect'.
W 05:04:48 Dummy sectors will be inserted where necessary.
I 05:05:45 Operation Started!
I 05:05:45 Source Device: [0:1:0] SAMSUNG DVD-ROM SD-616E F501 (D:) (ATA)
I 05:05:45 Source Media Type: DVD-ROM
I 05:05:45 Source Media Region Code: 1
I 05:05:45 Source Media Copyright Protection System Type: CSS/CPPM
I 05:05:45 Source Media Implementation Identifier: SONY DVD Video
I 05:05:45 Destination Folder: C:\DVD Burn\BEWITCHED\
I 05:05:45 File Splitting: By File
I 05:05:45 Remove Structure Protection: Yes
I 05:05:45 Bad Sector Removal Method: Normal
I 05:05:45 Detect Mastering Errors: No
I 05:05:45 Multi Angle Processing: No
I 05:05:45 Remove Macrovision Protection: Yes
I 05:05:45 Stream Processing: No
I 05:05:45 Copying VIDEO_TS.IFO... (LBA: 379290 - 379304) - KEY: N/A
I 05:05:46 Decrypting VIDEO_TS.VOB... (LBA: 379322 - 389232) - KEY: C0 75 9C A2 09
I 05:05:49 Copying VIDEO_TS.BUP... (LBA: 389242 - 389256) - KEY: N/A
I 05:05:49 Copying VTS_01_0.IFO... (LBA: 389274 - 389290) - KEY: N/A
I 05:05:49 Decrypting VTS_01_0.VOB... (LBA: 389291 - 389307) - KEY: C0 75 9C A2 09
I 05:05:49 Decrypting VTS_01_1.VOB... (LBA: 389308 - 684668) - KEY: C0 75 9C A2 09
I 05:07:12 Copying VTS_01_0.BUP... (LBA: 684669 - 684685) - KEY: N/A
I 05:07:12 Copying VTS_02_0.IFO... (LBA: 684686 - 684725) - KEY: N/A
I 05:07:12 Decrypting VTS_02_0.VOB... (LBA: 684726 - 729179) - KEY: D5 CA 6F 01 9D
I 05:07:24 Decrypting VTS_02_1.VOB... (LBA: 729180 - 1253466) - KEY: D5 CA 6F 01 9D
E 05:14:33 Failed to read Sector 737513 - Unrecovered Read Error
E 05:14:34 Failed to decrypt VTS_02_1.VOB!
I 05:14:37 Decrypting VTS_02_2.VOB... (LBA: 1253467 - 1777753) - KEY: D5 CA 6F 01 9D
I had the same problem and I first used Dvd Fab Decrypter 2.9.5.2 from www.dvdidle.com , then go to free stuff for download. Run it the use DVD shrink. It worked for me.

[ratboy68]

I had no problems at all using DVD Shrink 3.2

[kis2005]

DVDFab will work.

[setarip_old]

@jellygumbo

Hi!

if your copy of "Bewitched" is the Region 1 "Special Edition", load the DVD into DVD Decrypter v.3.5.4 again - and then "Import" (File>>Import PSL)the following PSL2 file (posted at another forum):

PSL2
0:0xA3A4320D,4169919,Bewitched - Special Edition - Region 1

1:729194,729200
1:729215,745825
1:4169650,4169909


6:2,1,3,2,1
6:2,1,3,3,1
6:2,1,3,4,0

6:2,1,6,2,1
6:2,1,6,3,1
6:2,1,6,4,0

6:2,1,7,2,1
6:2,1,7,3,1
6:2,1,7,4,0

6:2,1,8,2,1
6:2,1,8,3,1
6:2,1,8,4,0

6:2,1,9,2,1
6:2,1,9,3,1
6:2,1,9,4,0

6:2,1,10,2,1
6:2,1,10,3,1
6:2,1,10,4,0

6:2,1,11,2,1
6:2,1,11,3,1
6:2,1,11,4,0

6:2,1,12,2,1
6:2,1,12,3,1
6:2,1,12,4,0

6:2,1,13,2,1
6:2,1,13,3,1
6:2,1,13,4,0

6:2,1,14,2,1
6:2,1,14,3,1
6:2,1,14,4,0

6:2,1,15,2,1
6:2,1,15,3,1
6:2,1,15,4,0

6:2,1,16,2,1
6:2,1,16,3,1
6:2,1,16,4,0

6:2,1,17,2,1
6:2,1,17,3,1
6:2,1,17,4,0

6:2,1,18,2,1
6:2,1,18,3,1
6:2,1,18,4,0

6:2,1,19,2,1
6:2,1,19,3,1
6:2,1,19,4,0

6:2,1,20,2,1
6:2,1,20,3,1
6:2,1,20,4,0

6:2,1,21,2,1
6:2,1,21,3,1
6:2,1,21,4,0

[jellygumbo]

Thanks guys!! I havent tried the PSL import yet, but I did download and run DVDFAB....worked like a champ. Thanks a million!

[tjones]

Thanks guys!! I havent tried the PSL import yet, but I did download and run DVDFAB....worked like a champ. Thanks a million!
I tried all suggestions to no avail; PSL files kept giving the error message stating no PSL on line 0 ??? Please consider advising me on this task. FAB worked fine but shrink would not work kept getting errors.
"the following PSL2 file (posted at another forum):" what other forum ?

[jellygumbo]

What version of shrink are you using? Did you let FAB extract all files and then open files in shrink?


Coool Tools (http://www.sperian.com/tools.htm)

[setarip_old]

@tjones

Hi!

Are you (as you should be for using a PSL2 file) using DVD Decrypter v.3.5.4 (NOT an older version) to "Import" the PSL2 file AFTER loading the DVD?

[starscomeout]

@tjones

Hi!

Are you (as you should be for using a PSL2 file) using DVD Decrypter v.3.5.4 (NOT an older version) to "Import" the PSL2 file AFTER loading the DVD?

What is a PSL2 file and where do I import it from?

Don

[tjones]

@tjones

Hi!

Are you (as you should be for using a PSL2 file) using DVD Decrypter v.3.5.4 (NOT an older version) to "Import" the PSL2 file AFTER loading the DVD?

"What version of shrink are you using? Did you let FAB extract all files and then open files in shrink?" Version 3.2 of Shrink, and yes I did let Fab completely finnish the disk then tried to open as file, only to get error message.

I am Using DVD Decrypter version 3.5.2, for the import I will look for the version 3.5.4.see what happens.

(Installed version 3.5.4 then attempted import, now recieving the error message Initial checks indicate it is not intended for the current disc. (1).)
I am using the same file for PSL2 as posted above.

[starscomeout]

[QUOTE=tjones]"What version of shrink are you using? Did you let FAB extract all files and then open files in shrink?" Version 3.2 of Shrink, and yes I did let Fab completely finnish the disk then tried to open as file, only to get error message.

I was having all the same problems as stated above. I just figured out how to do the PSL file. Copy and paste the text below to notebook and save it as bewitched.psl .
Insert the movie into your DVD drive and then open DVD DVD Decrypter. Click on File, then Protected Sectors List, and then Import. Go to where you have saved the bewitched.psl and click on it and then on open. This will now allow you to completely rip the whole DVD to your hard drive. When finished you can then open the directory that now contains the complete ripped DVD and then edit it with DVD Shrink.

Don

Copy and paste the following to note and save as bewitched.psl :

PSL2
0:0xA3A4320D,4169919,Bewitched - Special Edition - Region 1

1:729194,729200
1:729215,745825
1:4169650,4169909


6:2,1,3,2,1
6:2,1,3,3,1
6:2,1,3,4,0

6:2,1,6,2,1
6:2,1,6,3,1
6:2,1,6,4,0

6:2,1,7,2,1
6:2,1,7,3,1
6:2,1,7,4,0

6:2,1,8,2,1
6:2,1,8,3,1
6:2,1,8,4,0

6:2,1,9,2,1
6:2,1,9,3,1
6:2,1,9,4,0

6:2,1,10,2,1
6:2,1,10,3,1
6:2,1,10,4,0

6:2,1,11,2,1
6:2,1,11,3,1
6:2,1,11,4,0

6:2,1,12,2,1
6:2,1,12,3,1
6:2,1,12,4,0

6:2,1,13,2,1
6:2,1,13,3,1
6:2,1,13,4,0

6:2,1,14,2,1
6:2,1,14,3,1
6:2,1,14,4,0

6:2,1,15,2,1
6:2,1,15,3,1
6:2,1,15,4,0

6:2,1,16,2,1
6:2,1,16,3,1
6:2,1,16,4,0

6:2,1,17,2,1
6:2,1,17,3,1
6:2,1,17,4,0

6:2,1,18,2,1
6:2,1,18,3,1
6:2,1,18,4,0

6:2,1,19,2,1
6:2,1,19,3,1
6:2,1,19,4,0

6:2,1,20,2,1
6:2,1,20,3,1
6:2,1,20,4,0

6:2,1,21,2,1
6:2,1,21,3,1
6:2,1,21,4,0

[tjones]

[QUOTE=tjones]"What version of shrink are you using? Did you let FAB extract all files and then open files in shrink?" Version 3.2 of Shrink, and yes I did let Fab completely finnish the disk then tried to open as file, only to get error message.

I was having all the same problems as stated above. I just figured out how to do the PSL file. Copy and paste the text below to notebook and save it as bewitched.psl .
Insert the movie into your DVD drive and then open DVD DVD Decrypter. Click on File, then Protected Sectors List, and then Import. Go to where you have saved the bewitched.psl and click on it and then on open. This will now allow you to completely rip the whole DVD to your hard drive. When finished you can then open the directory that now contains the complete ripped DVD and then edit it with DVD Shrink.

Don

Copy and paste the following to note and save as bewitched.psl :

PSL2
0:0xA3A4320D,4169919,Bewitched - Special Edition - Region 1

1:729194,729200
1:729215,745825
1:4169650,4169909


6:2,1,3,2,1
6:2,1,3,3,1
6:2,1,3,4,0

6:2,1,6,2,1
6:2,1,6,3,1
6:2,1,6,4,0

6:2,1,7,2,1
6:2,1,7,3,1
6:2,1,7,4,0

6:2,1,8,2,1
6:2,1,8,3,1
6:2,1,8,4,0

6:2,1,9,2,1
6:2,1,9,3,1
6:2,1,9,4,0

6:2,1,10,2,1
6:2,1,10,3,1
6:2,1,10,4,0

6:2,1,11,2,1
6:2,1,11,3,1
6:2,1,11,4,0

6:2,1,12,2,1
6:2,1,12,3,1
6:2,1,12,4,0

6:2,1,13,2,1
6:2,1,13,3,1
6:2,1,13,4,0

6:2,1,14,2,1
6:2,1,14,3,1
6:2,1,14,4,0

6:2,1,15,2,1
6:2,1,15,3,1
6:2,1,15,4,0

6:2,1,16,2,1
6:2,1,16,3,1
6:2,1,16,4,0

6:2,1,17,2,1
6:2,1,17,3,1
6:2,1,17,4,0

6:2,1,18,2,1
6:2,1,18,3,1
6:2,1,18,4,0

6:2,1,19,2,1
6:2,1,19,3,1
6:2,1,19,4,0

6:2,1,20,2,1
6:2,1,20,3,1
6:2,1,20,4,0

6:2,1,21,2,1
6:2,1,21,3,1
6:2,1,21,4,0

Thanks Don,
Tried your pSL2 in notepad, but did not work error message keeps saying Initial checks indicate it is not intended for disc(1).

[setarip_old]

@tjones

The PSL2 file I provided can ONLY be used with the PURCHASED, Region1, "Bewitched - Special Edition".

Is this what you have?

[tjones]

@tjones

The PSL2 file I provided can ONLY be used with the PURCHASED, Region1, "Bewitched - Special Edition".

Is this what you have?

Yes !

[setarip_old]

Just to provide you with a bit more information as to why I asked what version you have - As was noted regarding the Region 1 "Lords of Dogtown", not only were there two different versions for PURCHASE (with two different ARccOS protection schemes), the two versions available for RENTAL (with two different ARccOS protection schemes), had different ARccOS copy protection schemes than did the two versions available for PURCHASE.

This could very well be the same situation regarding "Bewitched"...

[2COOL]

It's a Sony disc so guess what? ARccOS is involved.No. I agree with cynthia in this post (http://forum.digital-digest.com/showthread.php?t=56675#).

[setarip_old]

@2COOL

Hi!

The thread you've provided a link to appears to be about copying two DVDs that have no copy protection - one of which appears to be a previously made copy.

How does this relate to backing up purchased versions of the "Bewitched" DVD? Or SONY movies in general?

[coledog]

Is there more detailed guide/link for the new Sony issue? I'm having problems with Lords of Dogtown.

[tjones]

Just to provide you with a bit more information as to why I asked what version you have - As was noted regarding the Region 1 "Lords of Dogtown", not only were there two different versions for PURCHASE (with two different ARccOS protection schemes), the two versions available for RENTAL (with two different ARccOS protection schemes), had different ARccOS copy protection schemes than did the two versions available for PURCHASE.

This could very well be the same situation regarding "Bewitched"...

This could be the problem, I guess short of learning exactly how to create PSL2's myself (which I am in the process of gathering all info I can find regarding) I am out of luck if I want to back-up my DVD's. I
back-up to protect the orginals not to mention I have a DVD player that some of my orginals will not play, only the back-ups, strange huh?

Sure wish someone or some forum group :confused: :devil: ;) would create and post a guide for creating PSL and PSL2 files!

[setarip_old]

This could be the problem
Why do you say this?
This could be the problem, I guess short of learning exactly how to create PSL2's myself (which I am in the process of gathering all info I can find regarding) I am out of luck if I want to back-up my DVD's.
That's not true. You're not limited to using DVD Decrypter (which is the ONLY program that uses PSL2 files to deal with NEWER SONY ARccOS-copy-protected DVDs), you know. As an alternative you could use (freeware) DVDFab Decrypter (Different than DVD Decrypter), or (commercial software) DVD95Copy...

[tjones]

Why do you say this?

That's not true. You're not limited to using DVD Decrypter (which is the ONLY program that uses PSL2 files to deal with NEWER SONY ARccOS-copy-protected DVDs), you know. As an alternative you could use (freeware) DVDFab Decrypter (Different than DVD Decrypter), or (commercial software) DVD95Copy...
I tried the DVD Fab Decrypter it worked fine but when I treid to Shrink version 3.2 I recieved another error message so that did not help. I have spent so much money on commercial softwear, the freeware seems to work just as well, I own DVDXcopy all versions (defuncked now reborn), Nero; and most reciently DVD Clone and the Fox.....shall I mention more ?

[starscomeout]

I tried the DVD Fab Decrypter it worked fine but when I treid to Shrink version 3.2 I recieved another error message so that did not help. I have spent so much money on commercial softwear, the freeware seems to work just as well, I own DVDXcopy all versions (defuncked now reborn), Nero; and most reciently DVD Clone and the Fox.....shall I mention more ?

The same here, the problems I had:

1. DVD Shrink would give me a copy protected error message right away.
2. DVD DVD Decrypter would stop about 10 percent into it.
3. I was then able to rip the whole DVD using DVDFab to hard drive.
4. Using DVD Shrink again on the movie ripped to hd, I would get the same copy protected error message.
5. I then figured out how to do the PSL2 file and was able to rip the whole movie to hd using DVD Decrypter.
6. I then was able to re-author the ripped movie with DVD Shrink.

I have ripped hundreds of movies and I have never had problems to this extent before.

The only reason I am interested in ripping movies is because I want to place them on my media server and use Meedio as my front-end software to just be able to sit back and scroll through the movies and click and play. I am also in the process setting up media sever clients to all the TVs in my home and I like the idea I can gain access to any movie from any TV.

Don

[setarip_old]

@tjones

the freeware seems to work just as well

Apparently not, from what you've posted...

[blutach]

Sure wish someone or some forum group :confused: :devil: ;) would create and post a guide for creating PSL and PSL2 files!The PSL2 plugin for PgcEdit is the way to go - guide here (http://forum.digital-digest.com/showthread.php?t=56078).

Note - this plugin is under continual development.

Regards

[tjones]

In 99.9 % of the time the freeware works just as good if not better than softwear I have purchased....
1. I ripped the movie using DVD Decrypter, so that I could create a log file in order to create my own PSL2 file, it is 122 pages long !

Once I complete that task, I will do the same as Don....
I will try blutach suggestion first though, I seek the route with the most ease to complete my task.

[WarDog]

Yes !
Did you get the version with the Bewitched TV sampler? If you did then IFO's could be different that's why you are getting the error that the psl is not for this disk.
Also remember that DVDD works best with settings set to default and no ANYDVD or DVD43 running in background especially using PSL2 files.

The above posted PSL2 works because I used it on the the rental I purchased from Blockbuster.

[setarip_old]

@tjones

. I ripped the movie using DVD Decrypter, so that I could create a log file in order to create my own PSL2 file, it is 122 pages long !

If you've ripped the DVD using DVD Decrypter set to -0- software read retries and checked "Ignore all read errors", you already have a rip that should be usable with DVD Shrink, DVD95Copy, and perhaps some other similar programs! . Creating a PSL2 file from your laborious task (Similar to what I described in an earlier thread regarding my rip of the "Lords of Dogtown - EC" DVD), will benefit others who have the same version of the DVD that you have, but it won't do anything further for you...

[tjones]

@tjones



If you've ripped the DVD using DVD Decrypter set to -0- software read retries and checked "Ignore all read errors", you already have a rip that should be usable with DVD Shrink, DVD95Copy, and perhaps some other similar programs! . Creating a PSL2 file from your laborious task (Similar to what I described in an earlier thread regarding my rip of the "Lords of Dogtown - EC" DVD), will benefit others who have the same version of the DVD that you have, but it won't do anything further for you...

Thanks setarip, I printed the file this at work only 37 pages long. I will try Shrink, I appreciate the help from all if that dont work I will turn off the Any DVD Fox, and try the PSL2 files....Again Thanks!

[setarip_old]

Again Thanks!

As always, my pleasure ;>}

[captain_video]

I ripped the rental version of Bewitched that I got from NetFlix using DVDFab Decryptor. I've since tried to process the VIDEO_TS files with DVDFab and VOB Blanker but the result is that the VTS_02_01.VOB file gets truncated to about 454 MB and none of the other VTS_02_0X.VOB files get processed at all. I've tried opening the VOB files in VideoReDo and a couple of other editing programs but they all just choke on the files. I also tried to shrink the DVD using DVD Rebuilder but it errors out in the final stage.

I've already returned the rental disc so I'm wondering if I have any other options to recover the DVD. It's not a major loss if I can't but it's a pain if I have to rent it again and go the PSL2 route. I'm not looking to make an illegal copy of the disc. I just make backups to DVD-RW of the DVDs I rent so I can watch them at my leisure and then reuse the disc for future rentals after it's been watched.

[CWR03]

I ripped the rental version of Bewitched
Regardless of your intended use of the copied rental disk, it is not Fair Use and is a forum rule #6 violation to ask for help with it.

[captain_video]

Here's rule No. 6 that you cited:

6) No warez, cracks, serials or illegally obtained copyrighted content! Links to content of a questionable nature, asking for, offering, or asking for help/helping to process such content in any way or form is not tolerated.

The way I see it, I paid to rent the disc (which qualifies as legally obtained since I paid a rental fee to acquire it), which theoretically gives me the right to view it as long as I don't distribute the contents to anyone else. I'd be happy to debate whether or not it falls under fair use or not. I don't see where it's any different than recording a movie from cable or satellite other than it is of higher quality than either DTV or analog transmissions except that there may be some stupid stipulation in the DMCA that says it is (a bad law is still a bad law, but that's not up for discussion, is it?). I won't argue semantics because I realize I'm just a guest here and some people are simply anal about this sort of thing. But thanks for pointing that out for me. :thanks:

[blutach]

You may find a mod sees things somewhat differently captain_video, particularly since it appears you are in the US where the DMCA reigns supreme.

Regards

[markrb]

illegally obtained copyrighted content!

As a former mod and the person that inspired much of that rule I will submit that the above line is valid here. Since that in the US it has been ruled that you may only copy video's you own. A rental is not considered ownership. It is a temporary licencse to view the material as long as you have the disc.
I hate to point this out, but it clearly isn't semantics. To claim fair use you must own the original at least in most countries. Laws differ by country, but this is the way it is thought of on this board.

You must understand that these rules are meant to protect the owners of this board from potential legal action. Regardless of how we feel about the laws we all want to protect Doom9 from potential issues.

We have already seen Lightning UK get hit hard and others boards get shut down.

Mark

[captain_video]

Sorry if I stepped on anyone's toes. Won't happen again.

[tjones]

Did you get the version with the Bewitched TV sampler? If you did then IFO's could be different that's why you are getting the error that the psl is not for this disk.
Also remember that DVDD works best with settings set to default and no ANYDVD or DVD43 running in background especially using PSL2 files.

The above posted PSL2 works because I used it on the the rental I purchased from Blockbuster.

No Sampler, It was the Any DVD running in the background, that caused the problem with the PSL2 files, once I uninstalled the AnyDVD the PSL2 import worked like a charm. Thanks To All for your assistance ! Once I completed the rip I re-installed the Any DVD, all is good again :D
Again Thanks To All for Your Support ! ;)

[setarip_old]

@tjones

Congratulations on your success!

I'm rather curious to know if your earlier DVD Decrypter-only rip (-0- retries and "Ignore read errors") worked properly with DVD Shrink?

[tjones]

@tjones

Congratulations on your success!

I'm rather curious to know if your earlier DVD Decrypter-only rip (-0- retries and "Ignore read errors") worked properly with DVD Shrink?

No! that did not work, nothing did until I uninstalled Any DVD. I uninstalled it because I could not figure out how to turn it off :confused: So I simply uninstalled it and once I completed the task I re-installed Any DVD.

[setarip_old]

No! that did not work, nothing did until I uninstalled Any DVD.

I see. I was unaware that you had AnyDVD running at the time. You said only that you had ripped it with DVD Decrypter. I guess you won't know whether ripping with ONLY DVD Decrypter (set to -0- software read retries and "Ignore all read errors") would have resulted in a usable version (I'm fairly certain it would have been successful)...

[WarDog]

@tjones

You can right click on the fox head in your tray and either disable or exit the program. This way ANYDVD will not interfer with other programs. Also in the same menu you have the option there to turn off autostart when you power up or reboot your computer so the program won't auto excute.

WarDog

[oversig]

I had the same problem with Bewitched.
Used CloneDVD2 2.8.5.1 with AnyDVD 5.4.4.1 then used Shrink 3.2.0.15 with Nero Recode2 version 2.2.6.16 worked just fine!!!

Did not know about IMGBurn at the time.
Also tried DVDFAB Decrypter 2.9.5.2 with Shrink & Nero, made a nice coaster!!
Has anyone copied it with INGBurn with Shrink & Nero????

[setarip_old]

@oversig

Hi!
Used CloneDVD2 2.8.5.1 with AnyDVD 5.4.4.1 then used Shrink 3.2.0.15 with Nero Recode2 version 2.2.6.16 worked just fine!!!

Since three of the four programs you used are commercial software, I'd just mention that you could have accomplished everything - ripping, compression, and burning - with just one commercial program and "one click", DVD95Copy...

[oversig]

I'll check into it.
The three commercial programs I mentioned are unregistered evaluation versions.
I did not know what the best program to use or method of programs....
Have always used Shrink with Nero. & what copy protection Shrink could not break
Decrypter would of course.
Now have Img.Burn & hopefully that will do the job with Shrink & Nero.
Thanks again for the program DVD95Copy info!

[blutach]

The PgcEdit plugin does the ripping on this and every other ARccOS disk for free. No need to buy any programs.

See here (http://forum.doom9.org/showthread.php?t=102146).

I wouldn't waste money on expensive things when there are free tools available.

Regards

[setarip_old]

@oversig
Thanks again for the program DVD95Copy info!

As always, my pleasure ;>}

[manwithaq]

I get errors using the free dvdfab I downloaded, DVD Shrink 3.2 does not work either to decrypt BEWITCHED.
How did you guys do it to be successful using DVDFAB or DVD Shrink??

[WarDog]

I get errors using the free dvdfab I downloaded, DVD Shrink 3.2 does not work either to decrypt BEWITCHED.
How did you guys do it to be successful using DVDFAB or DVD Shrink??
If you want to back up this movie go HERE (http://www.cdr-zone.com/forum/viewforum.php?f=33) and read the stickys.