PDA

View Full Version : All Of A Sudden Problems Burning Dvds....

tracertong
7th October 2005, 15:53
Guys

Can you check out this error log and tell me whats wrong - had no problems burning till last week but havent changed any programs or media so im stumped !

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PHILIPS PBDV1640P> Version: B3.5 - HA 0 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <d347prt> HA 3

=== Scsi-Device-Map ===
CdRomPeripheral : PHILIPS PBDV1640P atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3120827AS 3.42 viasraid Port 2 ID 2 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 2 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 3 DMA: Off

=== CDRom-Device-Map ===
PHILIPS PBDV1640P D: CDRom0
Generic DVD-ROM E: CDRom1
Generic DVD-ROM F: CDRom2
Generic DVD-ROM H: CDRom3
Generic DVD-ROM I: CDRom4
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 646MB (661520kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.10.2005
UDF/ISO compilation
15:48:24 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

15:48:24 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

15:48:24 #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

15:48:24 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

15:48:24 #5 Text 0 File Reader.cpp, Line 127
Reader running

15:48:24 #6 Text 0 File Writer.cpp, Line 122
Writer PHILIPS PBDV1640P running

15:48:24 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

15:48:24 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

15:48:24 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

15:48:24 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1065487 (236:46.37, 2081MB)

15:48:24 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

15:48:24 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PHILIPS PBDV1640P, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193

15:48:24 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:48:24 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1065488 (1065488) = #1065488/236:46.38
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1065488 blocks [PHILIPS PBDV1640P]
--------------------------------------------------------------

15:48:24 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PHILIPS PBDV1640P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2182119424, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1065488 | lead-out | 1 | 0x41 | 0x00

15:48:24 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

15:48:24 #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

15:48:24 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

15:48:24 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

15:48:24 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:48:24 #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode

15:48:24 #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON

15:48:24 #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes

15:48:24 #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15:49:32 #25 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0BB90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00

15:49:32 #26 CDR -1135 File Writer.cpp, Line 311
Write error

15:49:32 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15:49:32 #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

15:49:32 #29 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was -1

15:49:32 #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 22/08/2004 16:31:48 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
chilledinsanity
10th October 2005, 22:50
It could be a lot of things, you could try doing System Restore back to a point when you knew the burner was working and see if that helps. How long have you had your drive? Mine's recently started to go and I had to order a new one.
Taelon
11th October 2005, 19:15
Guys

Can you check out this error log and tell me whats wrong - had no problems burning till last week but havent changed any programs or media so im stumped !
=== Scsi-Device-Map ===
CdRomPeripheral : PHILIPS PBDV1640P atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3120827AS 3.42 viasraid Port 2 ID 2 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 2 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 3 DMA: Off

You've got a ton of devices listed, boot into "Safe Mode" and delete them all.
setarip_old
11th October 2005, 20:12
@tracertong

1) Do you actually have 4 DVD-ROMs (plus one burner) on your system?

2) You probably want to turn DMA "On" for your hard drive setup (and your DVD-ROM(s))
bigotti5
11th October 2005, 20:23
Generic DVD-ROM 1.0 d347prt Port 3 ID ......

are Daemon Tool Virtual Drives
Taelon
11th October 2005, 20:56
Sorry, wasn't thinking earlier, but do you really need 4 virtual drives? Anyway there is newer firmware here (http://forum.rpc1.org/dl_firmware.php?download_id=1941) notice they removed the links for 3.4 and 3.5, perhaps there are known issues?
Also note the mixed reports (http://www.videohelp.com/dvdmedia.php?selectmedia=2072#comments) on your media, might want to try burning at 4x.
LIGHTNING UK!
12th October 2005, 16:27
It says in the log:

15:49:32 #26 CDR -1135 File Writer.cpp, Line 311
Write error

So your burner errored out with a very generic 'Write Error'. That's unlikey to be caused by anything other than the drive / media - and by that I mean it shouldn't be software related!

Although you say you've not changed your media, you'd actually be advised to do just that - or at least try some other ones!

I'm not familiar with 'FUJIFI - LM03' discs so can't say for sure if they're good or bad.

Using that drive, I'd be inclined to use DVD+R discs I think. Philips drives often have more luck with them. (This is going back to the days of the Benq1620 drive that started off as DVD+R only until Philips released firmware that supported DVD-R too.).